Wander Gustavo Botero

Interaction between humic substances and metallic ions: a selectivity study of humic substances and their possible therapeutic application

The complexation capacity of humic substances extracted from peat samples taken from the Mogi River in Ribeirao Preto, SP, Brazil, was determined using metal ions (Al(III), Pb(II), Cr(VI) and Cd(II)), yielding the following order of affinity: Cr(VI)< Cd(II)<Pb(II)<Al(III). An oral LD50 test showed that these humic substances are nontoxic up to a maximum concentration of 512 mg kg-1. These findings reinforce the possibility of using humic substances as a metal detoxicant.

Kinetics and Adsorption Isotherms of Bisphenol A, Estrone, 17 beta-Estradiol, and 17 alpha-Ethinylestradiol in Tropical Sediment Samples

The sorption of four endocrine disruptors, bisphenol A (BPA), estrone (E1), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2) in tropical sediment samples was studied in batch mode under different conditions of pH, time, and sediment amount. Data obtained from sorption experiments using the endocrine disruptors (EDs) and sediments containing different amounts of organic matter showed that there was a greater interaction between the EDs and organic matter (OM) present in the sediment, particularly at lower pH values. The pseudosecond order kinetics model successfully explained the interaction between the EDs and the sediment samples. The theoretical and experimentally obtained qe values were similar, and k values were smaller for higher SOM contents. The kF values, obtained from the Freundlich isotherms, varied in the ranges 4.2–7.4 × 10−2 (higher OM sediment sample, S2) and 1.7 × 10−3–3.1 × 10−2 (lower OM sediment sample, S1), the latter case indicating an interaction with the sediment that increased in the order: EE2 > > E2 > E1 > BPA. These results demonstrate that the availability of endocrine disruptors may be directly related to the presence of organic material in sediment samples. Studies of this kind provide an important means of understanding the mobility, transport, and/or reactivity of this type of emergent contaminant in aquatic systems.

Cyanogenic Residues: Environmental Impacts, Complexation with Humic Substances, and Possible Application as Biofertilizer

The disposal of cyanogenic residues from the processing of cassava, during the flour production in certain regions of the Brazilian northeastern, has been a cause of concern in recent years, since this practice may lead to environmental imbalances. The results obtained in this work show a possible impact caused by the release of this kind of waste into water bodies, as well as its potential use as biofertilizer, mainly due to its high nutrient content. Humic substances (HS) from water and soil showed high interaction with cyanide ions (CN−), being the main responsible for the bioavailability of these ions into the environment. Furthermore, studies in microcosms propose viable and low-cost alternatives to decrease the levels of CN− ions in the liquid waste (called “manipueira”), as well as its potential use as biofertilizer.

Characterization of the interactions between endocrine disruptors and aquatic humic substances from tropical rivers

Interactions between two endocrine disruptors (ED) and aquatic humic substances (AHS) from tropical rivers were studied using an ultrafiltration system equipped with a 1 kDa cut-off cellulose membrane to separate free ED from the fraction bound in the AHS. Quantification of 17α-ethynylestradiol and bisphenol A was performed using gas chromatography-mass spectrometry (GC-MS). The times required for establishment of equilibrium between the AHS and the ED were ca. 30 min, and complexation capacities for 17α-ethynylestradiol and bisphenol A were 18.53 and 2.07 mg g-1 TOC, respectively. The greater interaction of AHS with 17α-ethynylestradiol, compared to bisphenol A, was due to the presence of hydrogen in the structure of 17α-ethynylestradiol, which could interact with ionized oxygenated groups of the AHS. The results indicate that AHS can strongly influence the transport and reactivity of endocrine disruptors in aquatic systems.

CARACTERIZAÇÃO DE LODO GERADO EM ESTAÇÕES DE TRATAMENTO DE ÁGUA: PERSPECTIVAS DE APLICAÇÃO AGRÍCOLA

The work reported here involved the characterization of sludges produced at water treatment plants in Jaboticabal-SP using FeCl3 as flocculant, and in Taquaritinga-SP and Manaus-AM using Al2(SO4)3 as flocculant. An evaluation was also made of the interaction of organic matter extracted from the sludges with different metal species. The results indicated that all the sludges produced at water treatment plants have an important agricultural potential and that their use depends on the characteristics of the raw water and the type of flocculant employed in conventional treatment. The humic substances extracted from the sludges showed different affinities for metal species, favoring eventual exchanges between potentially toxic metals and macro- and micronutrients. An alternative for the use of sludge in agriculture is to pretreat it to remove potentially toxic metals and enrich it with micro- and macronutrients that can be released to the plant.

PEST-ORCHESTRA, a tool for optimising advanced ion-binding model parameters: derivation of NICA-Donnan model parameters for humic substances reactivity

Environmental context The environmental behaviour of trace metals in soils and waters largely depends on the chemical form (speciation) of the metals. Speciation software programs combining models for the binding of metals to soil and sediment constituents are powerful tools in environmental risk assessment. This paper describes a new combination of speciation software with a fitting program to optimise geochemical model parameters that describes proton and metal binding to humic substances. Abstract Here we describe the coupling of the chemical speciation software ORCHESTRA with the parameter estimation software PEST. This combination enables the computation of optimised model parameters from experimental data for the ion binding models implemented in ORCHESTRA. For testing this flexible tool, the NICA-Donnan model parameters for proton-, Cd- and Zn-binding to Laurentian fulvic acid were optimised. The extensive description of the method implementation and the examples provided facilitate the use of this tool by students and researchers. Three procedures were compared which derive the proton binding parameters, differing in the way they constrain the model parameters and in the implementation of the electrostatic Donnan model. Although the different procedures resulted in significantly different sets of model parameters, the experimental data fit obtained was of similar quality. The choice of the relation between the Donnan volume and the ionic strength appears to have a strong influence on the derived set of optimal model parameters, especially on the values of the protonation constants, as well as on the Donnan potential and Donnan volume. Optimised results are discussed in terms of their physico-chemical plausibility. Coherent sets of NICA-Donnan parameters were derived for Cd and Zn binding to Laurentian fulvic acid.

Influence of the extractant on the complexing capacity of humic substances from peat for macro and micronutrients using continuous flow: agricultural application and environmental impacts

The aim of the present work was to optimize a procedure for extraction of humic substances (HS) from peat, using continuous flow with different extractants (NaOH, KOH and Na4P2O7). The influence of extractant on the complexing capacity of humic substances for macro and micronutrients was also investigated. Our results showed that the extraction by flow is efficient, reducing the time required in the extraction step and, furthermore, indicating that the extracted HS have a high affinity for the essential nutrients Ca and Mg. Moreover, an enhanced complexation was achieved by using Na4P2O7, demonstrating not only the efficiency of this compound as extractant, but also its promising application in the process, since its high complexing capacity allows to make available the complexed nutrients as well as diminishing the amount of these nutrients that could be lixiviated, thus contributing to prevent environmental contaminations.

Distribuição e biodisponibilidade de crômio em solos contaminados por resíduos de couro

Samples of soil, water and sediment were collected and analyzed in order to evaluate chromium contamination due to deposition of tannery residues onto soils under different management regimes. The results showed that soils used for sugar cane cultivation were not adversely impacted. However, in the case of mango plantations, variable concentrations of chromium were measured in the soil profile, with 22.2% of values being higher than permitted legal limits, and 38.9% being at levels requiring remediation. Concentrations of bioavailable chromium were lower than the detection limit of the method (0.01 mg of chromium kg-1 of soil), indicating that all of the chromium present in the samples was either complexed or in an insoluble form. Chromium concentrations measured in samples of water and sediments were indicative of low mobility of the metal in soils. The main cause of differences found between soil samples obtained from different cultivations was the type of soil management.

The use of sugar and alcohol industry waste in the adsorption of potentially toxic metals

One of the waste products of the industrial process of the sugar and alcohol agribusiness is filter cake (FC). This waste product has high levels of organic matter, mainly proteins and lipids, and is rich in calcium, nitrogen, potassium and phosphorous. In this work we characterized samples of FC from sugar and alcohol industries located in sugarcane-producing regions in Brazil and assessed the adsorption of potentially toxic metals (Cu(II), Cd(II), Pb(II), Ni(II) and Cr(III)) by this waste in mono- and multi-elemental systems, seeking to use FC as an adsorbent in contaminated environments. The characterization of FCs showed significant differences between the samples and the adsorption studies showed retention of over 90% of potentially toxic metals. In a competitive environment (multi-metallic solution), the FC was effective in adsorbing all metals except lead, but less effective compared to the mono-metallic solution. These results show the potential for use of this residue as an adsorbent in contaminated environments.

Influência das substâncias húmicas de sedimentos na biodisponibilidade de metais para o sistema aquático

In rivers, sediments act as sinks for retaining contaminants. This study evaluated the influence of sediment humic substances (HS) on the bioavailability of metals. The levels of metals in sediments and HS indicated that most are complexed with HS. Characterization of HS showed a high degree of humification. The complexation capacity of HS for metals established the affinity order:Pb2+<Cd2+<Co2+<Ni2+<Cu2+<Zn2+<Mn2+<Fe2+. Chemometric analysis demonstrated a correlation between the structural characteristics of HS and complexation capacity of metals.