Wang Huaibing

Improving InGaN-LED performance by optimizing the patterned sapphire substrate shape

The epitaxial growths of GaN films and GaN-based LEDs on various patterned sapphire substrates (PSSes) with different values of fill factor (f) and slanted angle (θ) are investigated in detail. The threading dislocation (TD) density is lower in the film grown on the PSS with a smaller fill factor, resulting in a higher internal quantum efficiency (IQE). Also the ability of the LED to withstand the electrostatic discharge (ESD) increases as the fill factor decreases. The illumination output power of the LED is affected by both θ and f. It is found that the illumination output power of the LED grown on the PSS with a lower production of tan θ and f is higher than that with a higher production of tan θ and f.

Thermal analysis of GaN laser diodes in a package structure

Using the finite-element method, the thermal resistances of GaN laser diode devices in a TO 56 package for both epi-up configuration and epi-down configuration are calculated. The effects of various parameters on the thermal characteristics are analysed, and the thicknesses of the AlN submount for both epi-up configuration and epi-down configuration are optimized. The obtained result provides a reference for the parameter selection of the package materials.

Formation of Low-Resistant and Thermally Stable Nonalloyed Ohmic Contact to N-Face n-GaN

We report on the formation of Ohmic contacts with low resistance and high thermal stability to N-face n-GaN for vertical structure light emitters using a Ti(50nm)/Pt(50nm)/Au(50nm) metal scheme, where the Pt layer is introduced as a blocking layer to suppress the diffusion of Au onto the N-face n-GaN surface. It is shown that unlike the conventional Ti/Al/Ti/Au contacts, the Ti/Pt/Au contacts exhibit an Ohmic behavior with a relatively low specific contact resistivity of 1.1×10−4 Ω·cm2 even after annealing at 350°C. X-ray diffraction (XRD) measurements by synchrotron radiation and Auger electron spectroscopy (AES) examination are performed to understand the effects of heat treatment.

Strain effects on optical polarisation properties in (112̄2) plane GaN films

We present the theoretical results of the electronic band structure of wurtzite GaN films under biaxial strains in the (112?2)-plane. The calculations are performed by the k ? p perturbation theory approach through using the effectivemass Hamiltonian for an arbitrary direction. The results show that the transition energies decrease with the biaxial strains changing from ?0.5% to 0.5%. For films of (112?2)-plane, the strains are expected to be anisotropic in the growth plane. Such anisotropic strains give rise to valence band mixing which results in dramatic change in optical polarisation property. The strain can also result in optical polarisation switching phenomena. Finally, we discuss the applications of these properties to the (112?2) plane GaN-based light-emitting diode and lase diode.

Room-Temperature Continuous-Wave Operation of InGaN-Based Blue-Violet Laser Diodes with a Lifetime of 15.6 Hours

We report our recent progress of investigations on InGaN-based blue-violet laser diodes (LDs). The room-temperature (RT) cw operation lifetime of LDs has extended to longer than 15.6 h. The LD structure was grown on a c-plane free-standing (FS) GaN substrate by metal organic chemical vapor deposition (MOCVD). The typical threshold current and voltage of LD under RT cw operation are 78 mA and 6.8 V, respectively. The experimental analysis of degradation of LD performances suggests that after aging treatment, the increase of series resistance and threshold current can be mainly attributed to the deterioration of p-type ohmic contact and the decrease of internal quantum efficiency of multiple quantum well (MQW), respectively.