Wataru Sugiyama

Determination of Subcritical Reactivity of a Thermal Accelerator-Driven System from Beam Trip and Restart Experiment

An experimental technique based on an accelerator-beam trip or restart operation is proposed to determine the subcritical reactivity of an accelerator-driven system (ADS). Applying the least-squares inverse kinetics method to the data analysis, the subcriticality can be inferred from time-sequence neutron count data after these operations. A series ofbeam trip and restart experiments with 14 MeV neutrons were carried out in a thermal ADS of Kyoto University Critical Assembly (KUCA), to demonstrate the applicability of the proposed technique. The subcriticalities evaluated using neutroncounters far from the DT target were consistent with those obtained in a previous pulsed neutron experiment. However, a counter placed close to the target significantly overestimated the subcriticality. The present technique is expected to be available for subcriritcality measurement at startup and shutdown of various ADSs.

Feynman-α Analysis for a Thermal Subcritical Reactor System Driven by an Unstable 14MeV Neutron Source

In a series of Feynman-α correlation measurements for a thermal Accelerator-Driven System (ADS) with 14MeV neutrons at the Kyoto University Critical Assembly (KUCA), an unstable accelerator condition such as a drift of beam current has been frequently observed. Neutron source instability caused by such unavoidable beam-current instability resulted in a divergent variance-to-mean ratio and, consequently, the correlation analysis failed. Nevertheless, we attempted to apply a difference-filtering technique to the correlation analysis to reduce the influence of the above instability. The present attempt resulted in consistent prompt-neutron decay constants with those obtained in a previous pulsed neutron experiment. The application of the filtering is expected to enhance the robustness of Feynman-α analysis against various instabilities of accelerator operation in actual ADS.

Power spectral analysis for a thermal subcritical reactor system driven by a pulsed 14 MeV neutron source

A series of power spectral analyses for a thermal subcritical reactor system driven by a pulsed 14 MeV neutron source was carried out at Kyoto University Critical Assembly (KUCA), to determine the prompt-neutron decay constant of the accelerator-driven system (ADS). The cross-power spectral density between time-sequence signal data of two neutron detectors was composed of a familiar continuous reactor noise component and many delta-function-like peaks at the integral multiple of pulse repetition frequency. The prompt-neutron decay constant inferred from the reactor noise component of the cross-power spectral density was consistent with that obtained by a pulsed neutron experiment. However, the reactor noise component of the auto-power spectral density of each detector was hidden by a white chamber noise in the higher-frequency range and this feature resulted in a considerable underestimation of the decay constant. For several runs with a low pulse-repetition frequency, furthermore, we attempted to infer the decay constant from point data of the delta-function-like peaks. The analysis for a run under a slightly subcritical state resulted in the consistent decay constant; however, those for other runs under significantly subcritical states underestimated the decay constant. Considering the contribution of a spatially higher mode to the point data, the above underestimation was solved to obtain the consistent decay constant. While the Feynman-α formula for a pulsed neutron source is too complicated to be fitted directly to variance-to-mean ratio data, the present analysis on frequency domain is much simpler and the conventional formula based on the first-order reactor transfer function is available for fitting to power spectral density data.

Measurement of large negative reactivity of an accelerator-driven system in the Kyoto University Critical Assembly

Large negative reactivity of a subcritical system driven by a pulsed 14 MeV neutron source has been measured in the Kyoto University Critical Assembly. The subcriticality of the accelerator-driven system (ADS) ranged in effective multiplication factor roughly from 0.98 to 0.92, which corresponded to an operational range of an actual ADS proposed by Japan Atomic Energy Agency. As the measurement technique, pulsed neutron method, power spectral analysis for pulsed neutron source, accelerator-beam trip method were employed. From neutron count decay data obtained by the pulsed neutron experiment, not only the prompt-neutron decay constant of fundamental mode but also a higher spatial mode could be derived. The subcriticality was also determined from the fundamental decay constant. The measured cross-power spectral density consisted of a familiar correlated reactor-noise component and many uncorrelated delta-function-like peaks at the integral multiple of pulse repetition frequency. The fundamental prompt-neutron decay constant, i.e., the subcriticality determined from the latter uncorrelated peaks was consistent with that obtained by the above pulsed neutron experiment. However, the magnitude of the former correlated component was reduced with an increase in the subcriticality and eventually this component became almost white at deeply subcritical state ranging in the multiplication factor under 0.95. Consequently, the determination of the decay constant from the correlated component was impossible under such a subcritical state. As data analysis method for the beam trip experiment, both the conventional integral count method and the least-squares inverse kinetics method (LSIKM) were employed. The LSIKM analysis led to the consistent subcriticality with that obtained by the pulsed neutron experiment, while the integral count method significantly underestimated the subcriticality. This underestimation originated from a residual background count, which was maintained after the beam trip. The LSIKM was mostly not influenced by such a slight count rate.

An improved Feynman-α analysis with a moving–bunching technique

ABSTRACT The bunching technique has been widely utilized in Feynman-α neutron correlation analysis to synthesize neutron counts within longer gate widths by bunching time-sequence neutron counts stored in multichannel scaler channels. An alternative technique referred to as “moving–bunching technique” was proposed to reduce a statistical scatter of variance-to-mean ratio of neutron counts. The conventional bunching technique has no overlap of adjacent bunches, while the present technique makes adjacent bunches overlap as long as possible similarly to the moving average technique. A Feynman-α experiment was performed in the UTR-KINKI, to confirm the advantage of the proposed bunching technique. When a neutron detector was placed far from the core, a Feynman-α analysis with the conventional bunching technique led to a scattered variance-to-mean ratio from which the prompt-neutron decay constant was never determinable. However, another analysis with the proposed technique remarkably reduced the above scatter and enabled the determination of the decay constant. For a neutron detector close to the core, the proposed technique also reduced statistical error of the decay constant.

Determination of prompt-neutron decay constant from phase shift between beam current and neutron detection signals for an accelerator-driven system in the Kyoto University Critical Assembly

A unique power spectral analysis for a subcritical reactor system driven by a pulsed 14 MeV neutron source was carried out at the Kyoto University Critical Assembly (KUCA). In this analysis, a complex cross-power spectral density between time-sequence signal data from an accelerator beam ammeter and a neutron detector was measured to determine the prompt-neutron decay constant of an accelerator-driven system (ADS) from the phase data of the spectral density. Assuming the one-point kinetics model, in theory, the decay constant can be arithmetically derived from the phase at the integral multiples of the pulse repetition frequency. However, the actual derivation from the phase at a pulse repetition frequency of 20 Hz considerably underestimated the prompt-neutron decay constant, compared with that obtained by a previous pulsed neutron experiment, and the derived decay constant apparently decreased with an increase in the multiple of the pulsed repetition frequency. Considering a lag time in detector response, the above underestimation and the above apparent decrease were solved to obtain the consistent decay constant. While both previous power spectral analysis and Feynman-α analysis for pulsed neutron source require non-linear least-squares fits of the respective complicated formulae, the present analysis makes the fitting unnecessary except at regular calibration of the lag time. This feature is advantageous for a robust online monitoring of subcritical reactivity of an actual ADS.

Time Trend Change of Air Dose Rate on Paved Areas in Fukushima City After the Fukushima Daiichi NPP Accident

The Kinki University Atomic Energy Research Institute investigated radioactive contamination resulting from the Fukushima Daiichi Nuclear Power Plant accident in urban areas of Fukushima City, Fukushima Prefecture, Japan. Activity measurement of the surface soil and a survey of the dose rate distribution in urban areas were performed. From the results of this research, dose rate changes in paved areas became clear, and gradients of the dose rate decrease for different paving materials were measured and analyzed.