Wei-Qiang Liao

A lead-halide perovskite molecular ferroelectric semiconductor

Inorganic semiconductor ferroelectrics such as BiFeO3 have shown great potential in photovoltaic and other applications. Currently, semiconducting properties and the corresponding application in optoelectronic devices of hybrid organo-plumbate or stannate are a hot topic of academic research; more and more of such hybrids have been synthesized. Structurally, these hybrids are suitable for exploration of ferroelectricity. Therefore, the design of molecular ferroelectric semiconductors based on these hybrids provides a possibility to obtain new or high-performance semiconductor ferroelectrics. Here we investigated Pb-layered perovskites, and found the layer perovskite (benzylammonium)2PbCl4 is ferroelectric with semiconducting behaviours. It has a larger ferroelectric spontaneous polarization Ps=13 μC cm−2 and a higher Curie temperature Tc=438 K with a band gap of 3.65 eV. This finding throws light on the new properties of the hybrid organo-plumbate or stannate compounds and provides a new way to develop new semiconductor ferroelectrics.

Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells.

Lead thiocyanate in the perovskite precursor can increase the grain size of a perovskite thin film and reduce the conductivity of the grain boundaries, leading to perovskite solar cells with reduced hysteresis and enhanced fill factor. A planar perovskite solar cell with grain boundary and interface passivation achieves a steady-state efficiency of 18.42%.

Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%

Efficient lead (Pb)-free inverted planar formamidinium tin triiodide (FASnI3 ) perovskite solar cells (PVSCs) are demonstrated. Our FASnI3 PVSCs achieved average power conversion efficiencies (PCEs) of 5.41% ± 0.46% and a maximum PCE of 6.22% under forward voltage scan. The PVSCs exhibit small photocurrent-voltage hysteresis and high reproducibility. The champion cell shows a steady-state efficiency of ≈6.00% for over 100 s.

Fabrication of Efficient Low-Bandgap Perovskite Solar Cells by Combining Formamidinium Tin Iodide with Methylammonium Lead Iodide

Mixed tin (Sn)-lead (Pb) perovskites with high Sn content exhibit low bandgaps suitable for fabricating the bottom cell of perovskite-based tandem solar cells. In this work, we report on the fabrication of efficient mixed Sn-Pb perovskite solar cells using precursors combining formamidinium tin iodide (FASnI3) and methylammonium lead iodide (MAPbI3). The best-performing cell fabricated using a (FASnI3)0.6(MAPbI3)0.4 absorber with an absorption edge of ∼1.2 eV achieved a power conversion efficiency (PCE) of 15.08 (15.00)% with an open-circuit voltage of 0.795 (0.799) V, a short-circuit current density of 26.86(26.82) mA/cm(2), and a fill factor of 70.6(70.0)% when measured under forward (reverse) voltage scan. The average PCE of 50 cells we have fabricated is 14.39 ± 0.33%, indicating good reproducibility.

Highly Efficient Red-Light Emission in An Organic–Inorganic Hybrid Ferroelectric: (Pyrrolidinium)MnCl3

Luminescence of ferroelectric materials is one important property for technological applications, such as low-energy electron excitation. However, the vast majority of doped inorganic ferroelectric materials have low luminescent efficiency. The past decade has envisaged much progress in the design of both ferroelectric and luminescent organic-inorganic hybrid complexes for optoelectronic applications. The combination of ferroelectricity and luminescence within organic-inorganic hybrids would lead to a new type of luminescent ferroelectric multifunctional materials. We herein report a hybrid molecular ferroelectric, (pyrrolidinium)MnCl3, which exhibits excellent ferroelectricity with a saturation polarization of 5.5 μC/cm(2) as well as intense red luminescence with high quantum yield of 56% under a UV excitation. This finding may extend the application of organic-inorganic hybrid compounds to the field of ferroelectric luminescence and/or multifunctional devices.

An organic-inorganic perovskite ferroelectric with large piezoelectric response

Finding a more flexible mechanical sensor Piezoelectric materials allow conversion between electricity and mechanical stresses. The most efficient piezoelectric materials are ceramics such as BaTiO3 or PbZrO3, which are also extremely stiff. You et al. identified an organic perovskite structured piezoelectric material that is far more pliable yet has a piezoelectric response similar to that of traditional ceramics. This material may be a better option to use as a mechanical sensor for flexible devices, soft robotics, biomedical devices, and other micromechanical applications that benefit from a less stiff piezoelectric material. Science, this issue p. 306 Trimethylchloromethyl ammonium trichloromanganese(II) may be a flexible material competitive for piezoelectric applications. Molecular piezoelectrics are highly desirable for their easy and environment-friendly processing, light weight, low processing temperature, and mechanical flexibility. However, although 136 years have passed since the discovery in 1880 of the piezoelectric effect, molecular piezoelectrics with a piezoelectric coefficient d33 comparable with piezoceramics such as barium titanate (BTO; ~190 picocoulombs per newton) have not been found. We show that trimethylchloromethyl ammonium trichloromanganese(II), an organic-inorganic perovskite ferroelectric crystal processed from aqueous solution, has a large d33 of 185 picocoulombs per newton and a high phase-transition temperature of 406 kelvin (K) (16 K above that of BTO). This makes it a competitive candidate for medical, micromechanical, and biomechanical applications.

High-Temperature Ferroelectricity and Photoluminescence in a Hybrid Organic–Inorganic Compound: (3-Pyrrolinium)MnCl3

Coupling of ferroelectricity and optical properties has become an interesting aspect of material research. The switchable spontaneous polarization in ferroelectrics provides an alternative way to manipulate the light-matter interaction. The recent observation of strong photoluminescence emission in ferroelectric hybrid organic-inorganic compounds, (pyrrolidinium)MnX3 (X = Cl or Br), is an attractive approach to high efficiency luminescence with the advantages of ferroelectricity. However, (pyrrolidinium)MnX3 only displays ferroelectricity near or below room temperature, which limits its future applications in optoelectronics and multifunctional devices. Here, we rationally designed and synthesized high-temperature luminescent ferroelectric materials. The new hybrid compound (3-pyrrolinium)MnCl3 has a very high Curie temperature, Tc = 376 K, large spontaneous electronic polarization of 6.2 μC/cm(2), and high fatigue resistance, as well as high emission efficiency of 28%. This finding is a further step to the practical use of ferroelectric luminescence based on organic-inorganic compounds.

Bandgap Engineering of Lead‐Halide Perovskite‐Type Ferroelectrics

Semiconducting ferroelectricity is realized in hybrid perovskite-type compounds (cyclohexylammonium)2 PbBr4-4 x I4 x (x = 0-1). By adjusting the composition x, the bandgap is successfully tuned from previously reported 3.65 eV to as low as 2.74 eV, and the excellent ferroelectricity was kept intact. This finding may contribute to improving the photoelectronic and/or photovoltaic performance of hybrid perovskite-type compounds.

The First Organic–Inorganic Hybrid Luminescent Multiferroic: (Pyrrolidinium)MnBr3

A hybrid organic-inorganic compound, (pyrrolidinium)MnBr3 , distinguished from rare earth (RE)-doped inorganic perovskites, is discovered as a new member of the ferroelectrics family, having excellent luminescent properties and relatively large spontaneous polarization of 6 μC cm(-2) , as well as a weak ferromagnetism at about 2.4 K. With a quantum yield of >28% and emission lifetime >0.1 ms, such multiferroic photoluminescence is a suitable candidate for future applications in luminescence materials, photovoltaics, and magneto-optoelectronic devices.

Photovoltaic Properties of Two-Dimensional (CH3NH3)2Pb(SCN)2I2 Perovskite: A Combined Experimental and Density Functional Theory Study

We explore the photovoltaic-relevant properties of the 2D MA2Pb(SCN)2I2 (where MA = CH3NH3(+)) perovskite using a combination of materials synthesis, characterization and density functional theory calculation, and determine electronic properties of MA2Pb(SCN)2I2 that are significantly different from those previously reported in literature. The layered perovskite with mixed-anions exhibits an indirect bandgap of ∼2.04 eV, with a slightly larger direct bandgap of ∼2.11 eV. The carriers (both electrons and holes) are also found to be confined within the 2D layers. Our results suggest that the 2D MA2Pb(SCN)2I2 perovskite may not be among the most promising absorbers for efficient single-junction solar cell applications; however, use as an absorber for the top cell of a tandem solar cell may still be a possibility if films are grown with the 2D layers aligned perpendicular to the substrates.