Weijia Wen

Dark acoustic metamaterials as super absorbers for low-frequency sound

The attenuation of low-frequency sound has been a challenging task because the intrinsic dissipation of materials is inherently weak in this regime. Here we present a thin-film acoustic metamaterial, comprising an elastic membrane decorated with asymmetric rigid platelets that aims to totally absorb low-frequency airborne sound at selective resonance frequencies ranging from 100-1,000 Hz. Our samples can reach almost unity absorption at frequencies where the relevant sound wavelength in air is three orders of magnitude larger than the membrane thickness. At resonances, the flapping motion of the rigid platelets leads naturally to large elastic curvature energy density at their perimeter regions. As the flapping motions couple only minimally to the radiation modes, the overall energy density in the membrane can be two-to-three orders of magnitude larger than the incident wave energy density at low frequencies, forming in essence an open cavity.

Electrorheological Fluids: Structures and Mechanisms

Electrorheology denotes the control of a colloids flow properties through an electric field. We delineate the basic characteristics of electrorheological (ER) fluids, and show that the use of an effective dielectric constant concept can yield quantitative predictions. In particular, the ground state structure, the structural transition that occurs under crossed electric and magnetic fields, the high-field yield stress and its variation with particle size are all in good agreement with the experiments. The recently discovered giant electrorheological effect, owing its origin to molecular dipoles, is described and contrasted with the conventional ER effect that arises from induced polarization effects.

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

We report a simple methodology to fabricate PDMS multi-layer microfluidic chips. A PDMS slab was surface-treated by trichloro (1H,1H,2H,2H-perfluorooctyl) silane, and acts as a reusable transferring layer. Uniformity of the thickness of the patterned PDMS layer and the well-alignment could be achieved due to the transparency and proper flexibility of this transferring layer. Surface treatment results are confirmed by XPS and contact angle testing, while bonding forces between different layers were measured for better understanding of the transferring process. We have also designed and fabricated a few simple types of 3D PDMS chip, especially one consisting of 6 thin layers (each with thickness of 50 mum), to demonstrate the potential utilization of this technique. 3D fluorescence images were taken by a confocal microscope to illustrate the spatial characters of essential parts. This fabrication method is confirmed to be fast, simple, repeatable, low cost and possible to be mechanized for mass production.

Real-time detection, control, and sorting of microfluidic droplets.

We report the design and implementation of capacitive detection and control of microfluidic droplets in microfluidic devices. Integrated microfluidic chip(s) with detectioncontrol circuit enables us to monitor in situ the individual volume of droplets, ranging from nanoliter to picoliter, velocity and even composition, with an operation frequency of several kilohertz. Through electronic feedback, we are able to easily count, sort, and direct the microfluidic droplets. Potential applications of this approach can be employed in the areas of biomicrofluidic processing, microchemical reactions as well as digital microfluidics.

Particle size scaling of the giant electrorheological effect

This letter shows that by decreasing the size of the barium titanyl oxalate nanoparticles coated with urea, achieved through Rb doping, the giant electrorheological (GER) effect can attain a yield stress of >250kPa. The shear thinning effect observed in parallel-plate sandwich configuration is also reported, and attributed to the centrifugal sedimentation effect of the inhomogeneous structures induced by applied electric field. In addition, it is found from experiments that the ER effect is very sensitive to the solid particles volume fraction.

A review of microfabrication techniques and dielectrophoretic microdevices for particle manipulation and separation

The development of lab-on-a-chip (LOC) devices over the past decade has attracted growing interest. LOC devices aim to achieve the miniaturization, integration, automation and parallelization of biological and chemical assays. One of the applications, the ability to effectively and accurately manipulate and separate micro- and nano-scale particles in an aqueous solution, is particularly appealing in biological, chemical and medical fields. Among the technologies that have been developed and implemented in microfluidic microsystems for particle manipulation and separation (such as mechanical, inertial, hydrodynamic, acoustic, optical, magnetic and electrical methodologies), dielectrophoresis (DEP) may prove to be the most popular because of its label-free nature, ability to manipulate neutral bioparticles, analyse with high selectivity and sensitivity, compatibility with LOC devices, and easy and direct interface with electronics. The required spatial electric non-uniformities for the DEP effect can be generated by patterning microelectrode arrays within microchannels, or placing insulating obstacles within a microchannel and curving the microchannels. A wide variety of electrode- and insulator-based DEP microdevices have been developed, fabricated, and successfully employed to manipulate and separate bioparticles (i.e. DNA, proteins, bacteria, viruses, mammalian and yeast cells). This review provides an overview of the state-of-the-art of microfabrication techniques and of the structures of dielectrophoretic microdevices aimed towards different applications. The techniques used for particle manipulation and separation based on microfluidics are provided in this paper. In addition, we also present the theoretical background of DEP.

Generation and manipulation of “smart” droplets

We report the generation and manipulation of electrorheological (ER) droplets that exhibit the giant ER effect. The experiments were carried out on specially designed microfluidic chips, in which the ER droplets were generated by using the microfluidic flow-focusing approach. Both the size and formation rate of these droplets can be controlled through digitally applied electrical signals. The principle of droplet manipulation is based on the electrical responsiveness of ER droplets and hence the denotation of “smart” when the electrical signals can be triggered by sensing/control devices. Due to the unique characteristics of the GER effect, the smart droplets can deform and even stop the microfluidic channel flow under an applied electric field. The pressure difference induced by the smart droplets inside the micro-channel is controllable by varying the field strengths, droplet sizes and particle concentrations in the GER suspension. By trapping and timed release of smart droplets in different micro-branch channels, we demonstrate that the smart droplets generated upstream cannot only be stored or displayed in the desired downstream channel(s) and thereby offer the potential of micro-droplet display, but also be useful in counting, flow directing and sorting the desired number of passive droplets sandwiched between two smart droplets. Such capabilities of smart droplets will enable the programmable control of discrete processes in bio-analysis, chemical reactions, digital microfluidics, and digital droplet display.

Extraction, amplification and detection of DNA in microfluidic chip-based assays

AbstractThis review covers three aspects of PCR-based microfluidic chip assays: sample preparation, target amplification, and product detection. We also discuss the challenges related to the miniaturization and integration of each assay and make a comparison between conventional and microfluidic schemes. In order to accomplish these essential assays without human intervention between individual steps, the micro-components for fluid manipulation become critical. We therefore summarize and discuss components such as microvalves (for fluid regulation), pumps (for fluid driving) and mixers (for blending fluids). By combining the above assays and microcomponents, DNA testing of multi-step bio-reactions in microfluidic chips may be achieved with minimal external control. The combination of assay schemes with the use of micro-components also leads to rapid methods for DNA testing via multi-step bioreactions. Contains 259 references. FigureA graphical presentation of main PCR assays: DNA extraction from raw sample, target amplification by PCR and final product detection in conventional bench-top lab and miniaturized microfluidic chip.

Analysis and fabrication of patterned magnetorheological elastomers

This paper presents analysis, fabrication and characterization of patterned magnetorheological (MR) elastomers. By taking into account the local magnetic field in MREs and particle interaction magnetic energy, the magnetic-field-dependent mechanical properties of MREs with lattice and BCC structures were theoretically analyzed and numerically simulated. Soft magnetic particles were assembled in a polydimethylsiloxane (PDMS) matrix to fabricate new MR elastomers with uniform lattice and BCC structures, which were observed by a microscope. The field-dependent moduli of the new MR elastomers were characterized by using a parallel-plate MR rheometer. The experimental results agreed well with numerical simulations.

Polydimethylsiloxane microfluidic chip with integrated microheater and thermal sensor

A microheater and a thermal sensor were fabricated inside elastomeric polydimethylsiloxane microchannels by injecting silver paint (or other conductive materials) into the channels. With a high-precision control scheme, microheaters can be used for rapid heating, with precise temperature control and uniform thermal distribution. Using such a microheater and feedback system, a polymerase chain reaction experiment was carried out whereas the DNA was successfully amplified in 25 cycles, with 1 min per cycle.