Weixiong Zhao

A Review of Signal Enhancement and Noise Reduction Techniques for Tunable Diode Laser Absorption Spectroscopy

Abstract: Tunable diode laser absorption spectroscopy (TDLAS), as a noninvasive spectroscopic method, permits high-resolution, high-sensitivity, fast, in situ absorption measurements of atomic and molecular species and narrow spectral features in gaseous, solid, and liquid phases. Advances in new diode laser sources and laser spectroscopic techniques generally have triggered an increasing application of TDLAS in various disciplines (for example, atmospheric environmental monitoring, chemical analysis, industrial process control, medical diagnostics and combustion monitoring, etc.) over the last four decades. This article reviews some important developments in TDLAS, from its basic principles as a spectroscopic tool to the demonstration of gas absorption measurements, emphasizing signal enhancement and noise reduction techniques developed for improving current TDLAS performance.

Theoretical studies on gas-phase reactions of sulfuric acid catalyzed hydrolysis of formaldehyde and formaldehyde with sulfuric acid and H2SO4···H2O complex.

The gas-phase reactions of sulfuric acid catalyzed hydrolysis of formaldehyde and formaldehyde with sulfuric acid and H2SO4···H2O complex are investigated employing the high-level quantum chemical calculations with M06-2X and CCSD(T) theoretical methods and the conventional transition state theory (CTST) with Eckart tunneling correction. The calculated results show that the energy barrier of hydrolysis of formaldehyde in gas phase is lowered to 6.09 kcal/mol from 38.04 kcal/mol, when the sulfuric acid is acted as a catalyst at the CCSD(T)/aug-cc-pv(T+d)z//M06-2X/6-311++G(3df,3pd) level of theory. Furthermore, the rate constant of the sulfuric acid catalyzed hydrolysis of formaldehyde combined with the concentrations of the species in the atmosphere demonstrates that the gas-phase hydrolysis of formaldehyde of sulfuric acid catalyst is feasible and could be of great importance for the sink of formaldehyde, which is in previously forbidden hydrolysis reaction. However, it is shown that the gas-phase reactions of formaldehyde with sulfuric acid and H2SO4···H2O complex lead to the formation of H2C(OH)OSO3H, which is of minor importance in the atmosphere.

Wavelength-Resolved Optical Extinction Measurements of Aerosols Using Broad-Band Cavity-Enhanced Absorption Spectroscopy over the Spectral Range of 445−480 nm

Despite the significant progress in the measurements of aerosol extinction and absorption using spectroscopy approaches such as cavity ring-down spectroscopy (CRDS) and photoacoustic spectroscopy (PAS), the widely used single-wavelength instruments may suffer from the interferences of gases absorption present in the real environment. A second instrument for simultaneous measurement of absorbing gases is required to characterize the effect of light extinction resulted from gases absorption. We present in this paper the development of a blue light-emitting diode (LED)-based incoherent broad-band cavity-enhanced spectroscopy (IBBCEAS) approach for broad-band measurements of wavelength-resolved aerosol extinction over the spectral range of 445-480 nm. This method also allows for simultaneous measurement of trace gases absorption present in the air sample using the same instrument. On the basis of the measured wavelength-dependent aerosol extinction cross section, the real part of the refractive index (RI) can be directly retrieved in a case where the RI does not vary strongly with the wavelength over the relevant spectral region. Laboratory-generated monodispersed aerosols, polystyrene latex spheres (PSL) and ammonium sulfate (AS), were employed for validation of the RI determination by IBBCEAS measurements. On the basis of a Mie scattering model, the real parts of the aerosol RI were retrieved from the measured wavelength-resolved extinction cross sections for both aerosol samples, which are in good agreement with the reported values. The developed IBBCEAS instrument was deployed for simultaneous measurements of aerosol extinction coefficient and NO(2) concentration in ambient air in a suburban site during two representative days.

Study of Cl−(H2O)n (n = 1–4) using basin-hopping method coupled with density functional theory

Cl−(H2O)n (n = 1–4) clusters were investigated using a basin‐hopping (BH) algorithm coupled with density functional theory (DFT). Structures, energetics, thermodynamics, vertical detachment energies, and vibrational frequencies were obtained from high‐level ab initio calculations. Through comparisons with previous theoretical and experimental data, it was demonstrated that the combination of the BH method and DFT could accurately predict the global and local minima of Cl−(H2O)n (n = 1–4). Additionally, to optimize larger Cl−(H2O)n (n > 4) clusters, several popular density functionals as well as DF‐LMP2 (Schütz et al., J. Chem. Phys. 2004, 121, 737) (second‐order Møller‐Plesset perturbation theory using local and density fitting approximations) were tested with appropriate basis sets through comparisons with MP2 optimized results. DF‐LMP2 will be used in future studies because its overall performance in describing the relative binding energies and the geometrical parameters of Cl−(H2O)n (n = 1–4) was outstanding in this study.

Sensitive and selective detection of OH radicals using Faraday rotation spectroscopy at 2.8 µm.

We report on the development of a Faraday rotation spectroscopy (FRS) instrument using a DFB diode laser operating at 2.8 µm for the hydroxyl (OH) free radical detection. The highest absorption line intensity and the largest gJ value make the Q (1.5) double lines of the 2Π3/2 state (υ = 1 ← 0) at 2.8 µm clearly the best choice for sensitive detection in the infrared region by FRS. The prototype instrument shows shot-noise dominated performance and, with an active optical pathlength of only 25 cm and a lock-in time constant of 100 ms, achieves a 1σ detection limit of 8.2 × 10(8) OH radicals/cm3.

Direct detection of isoprene photooxidation products by using synchrotron radiation photoionization mass spectrometry.

We report the combination of a vacuum ultraviolet photoionization mass spectrometer, operating on the basis of synchrotron radiation, with an environmental reaction smog chamber for the first time. The gas- and pseudo-particle-phase products of OH-initiated isoprene photooxidation reactions were measured on-line and off-line, respectively, by mass spectrometry. It was observed that aldehydes, methacrolein, methyl vinyl ketone, methelglyoxal, formic acid, and similar compounds are the predominant gas-phase photooxidation products, whereas some multifunctional carbonyls and acids mainly exist in the particle phase. This finding is reasonably consistent with results of studies conducted in other laboratories using different methods. The results indicate that synchrotron radiation photoionization mass spectrometry coupled with a smog chamber is a potentially powerful tool for the study of the mechanism of atmospheric oxidations and the formation of secondary organic aerosols.

Sensing atmospheric reactive species using light emitting diode by incoherent broadband cavity enhanced absorption spectroscopy

We overview our recent progress in the developments and applications of light emitting diode-based incoherent broadband cavity enhanced absorption spectroscopy (LED-IBBCEAS) techniques for real-time optical sensing chemically reactive atmospheric species (HONO, NO3, NO2) in intensive campaigns and in atmospheric simulation chamber. New application of optical monitoring of NO3 concentration-time profile for study of the NO3-initiated oxidation process of isoprene in a smog chamber is reported.

Size distribution and chemical composition of secondary organic aerosol formed from Cl-initiated oxidation of toluene

Secondary organic aerosol (SOA) formed from C1-initiated oxidation of toluene was investigated in a home-made smog chamber. The size distribution and chemical composition of SOA particles were measured using aerodynamic particle sizer spectrometer and the aerosol laser time-of-flight mass spectrometer (ALTOFMS), respectively. According to a large number of single aerosol diameter and mass spectra, the size distribution and chemical composition of SOA were obtained statistically. Experimental results showed that SOA particles created by C1-initiated oxidation of toluene is predominantly in the form of fine particles, which have diameters less than 2.5 microm (i.e., PM2.5), and glyoxal, benzaldehyde, benzyl alcohol, benzoquinone, benzoic acid, benzyl hydroperoxide and benzyl methyl nitrate are the major products components in the SOA. The possible reaction mechanisms leading to these products are also proposed.

Chemical composition and size distribution of secondary organic aerosol formed from the photooxidation of isoprene

Photooxidation of isoprene leads to the formation of secondary organic aerosol (SOA). In this study, the chemical composition of SOA formed from OH-initiated photooxidation of isoprene has been investigated with gas chromatography/mass spectrometry (GC/MS) and a home-made aerosol time-of-flight mass spectrometer. Sampling particles generated in a home-made smog chamber. The size distribution of SOA particles was detected by a TSI 3321 aerodynamic particle size spectrometer in real time. Results showed that SOA created by isoprene photooxidation was predominantly in the form of fine particles, which have diameters less than 2.5 microm. The obtained mass spectra of individual particles show that products of the OH-initiated oxidation of isoprene contain methyl vinyl ketone, methacrolein, formaldehyde, and some other hydroxycarbonyls. The possible reaction mechanisms leading to these products were also discussed.

Experimental study of particulate products for aging of 1,3,5–trimethylbenzene secondary organic aerosol

Secondary organic aerosol (SOA) from the photooxidation of aromatic compounds is a very complex mixture containing products with a different chemical nature that are dependent on aging processes. In this study, we focus on the chemical characterization of major products that are formed from the OH–initiated oxidation of 1,3,5–trimethylbenzene and subsequent aging through OH–initiated reactions in the presence of NOx.The chemical composition of aged particles were measured in real–time by an aerosol laser time of flight mass spectrometer (ALTOFMS) coupled with Fuzzy C–Means (FCM) clustering algorithm. Experimental results demonstrated that methyl glyoxylic acid, 2–methyl–4–oxo–2–pentenoic acid, 3,5–dimethylbenzoic acid, 2–methyl–2,3–dihydroxyl–4–oxo–pentanoic acid, dimethyl–nitrophenol, 3,4–dimethyl–2–hydroxy–3–oxo–pentandioic acid, 2,4–dimethyl–2,3–dihydroxy–6–oxo–4–heptenoic acid, 2,4–dimethyl–4–hydroxy–2,3–epoxy– heptylic acid, 2,4–dimethyl–2,3,4–trihydroxy–5,6–dioxo–heptylic acid, and oligomer components were the predominant products in the aging particles. The possible reaction mechanisms leading to these aged products were also discussed and proposed.