William Robert Ross

Design and performance characteristics of a digital flat-panel computed tomography system

Computed tomography (CT) applications continue to expand, and they require faster data acquisition speeds and improved spatial resolution. Achieving isotropic resolution, by means of cubic voxels, in combination with longitudinal coverage beyond 20 mm would represent a substantial advance in clinical CT because few commercially available scanners are capable of this at present. To achieve this goal, a prototype CT system incorporating a movable array of 20 cm X 20 cm, 200-microm-pitch amorphous silicon flat-panel x-ray detectors and a conventional CT x-ray source was constructed at the General Electric Global Research Center and performance tested at The University of Texas M. D. Anderson Cancer Center. The device was designed for preclinical imaging applications and has a scan field of 13 to 33 cm, with a magnification of 1.5. Image quality performance measurements, such as spatial and contrast resolutions, were obtained using both industry standard and custom phantoms. Spatial resolution, quantified by the systems modulation transfer function, indicated improvement by a factor of 2.5 to 5 in isotropic spatial resolution over current commercially available systems, with 10% modulation transfer function modulations at frequencies from 19 to 31 lp/cm. Low-contrast detectability results were obtained from industry-standard phantoms and were comprised of embedded contrast regions of 0.3%, 0.5%, and 1.0% over areas of several mm2. Performance was sufficient to easily distinguish 1.0% contrast regions down to 2 mm in diameter relative to the background. On the basis of scans of specialized hydroxyapatite phantoms, the system response is extremely linear (R2=0.990) in bone-equivalent density regimens. Standard CT dose index CTDI100 and CTDIw measurements were also conducted to assess dose delivery using a 16-cm-CTDI phantom and a 120 kV 120 mAs scan technique. The CTDIw ranged from 30 mGy (one-panel mode) to 113 mGy (two-panel mode) for this system. Lastly, several in vivo canine and murine samples were examined, and preliminary results from these scans are presented. On the basis of our results, it is clear that flat-panel-based CT scanners are useful for high-contrast high-resolution clinical applications, providing up to a 20-fold increase in volumetric resolution over most commercially available scanners.

High-speed large-angle mammography tomosynthesis system

A new mammography tomosynthesis prototype system that acquires 21 projection images over a 60 degree angular range in approximately 8 seconds has been developed and characterized. Fast imaging sequences are facilitated by a high power tube and generator for faster delivery of the x-ray exposure and a high speed detector read-out. An enhanced a-Si/CsI flat panel digital detector provides greater DQE at low exposure, enabling tomo image sequence acquisitions at total patient dose levels between 150% and 200% of the dose of a standard mammographic view. For clinical scenarios where a single MLO tomographic acquisition per breast may replace the standard CC and MLO views, total tomosynthesis breast dose is comparable to or below the dose in standard mammography. The system supports co-registered acquisition of x-ray tomosynthesis and 3-D ultrasound data sets by incorporating an ultrasound transducer scanning system that flips into position above the compression paddle for the ultrasound exam. Initial images acquired with the system are presented.

Dual kVp material decomposition using flat-panel detectors

In addition to a conventional Computed Tomography (CT) image, dual energy (dual kVp) imaging can be used to generate an image of the same anatomy that represents the equivalent density of a particular material, for example, calcium, iodine, water, etc. This image can be used to improve the differentiation of materials as well as improve the accuracy of absolute density measurements in a cross-sectional image. It is important to understand the certainty of the estimation of the density of the material. Both simulations and measurements are used to quantify these errors. Data are acquired using a flat-panel based volumetric CT system, by taking two scans and adjusting the maximum energy of the source spectrum (kVp). Physics based simulations are used to compare with the measurements. After validating the simulation algorithms, the accuracy of the dual kVp method is determined using the simulations in a perturbation study.

Design and image quality results from volumetric CT with a flat-panel imager

Preliminary MTF and LCD results obtained on several volumetric computed tomography (VCT) systems, employing amorphous flat panel technology, are presented. Constructed around 20-cm x 20-cm, 200-mm pitch amorphous silicon x-ray detectors, the prototypes use standard vascular or CT x-ray sources. Data were obtained from closed-gantry, benchtop and C-arm-based topologies, over a full 360 degrees of rotation about the target object. The field of view of the devices is approximately 15 cm, with a magnification of 1.25-1.5, providing isotropic resolution at isocenter of 133-160 mm. Acquisitions have been reconstructed using the FDK algorithm, modified by motion corrections also developed by GE. Image quality data were obtained using both industry standard and custom resolution phantoms as targets. Scanner output is compared on a projection and reconstruction basis against analogous output from a dedicated simulation package, also developed at GE. Measured MTF performance is indicative of a significant advance in isotropic image resolution over commercially available systems. LCD results have been obtained, using industry standard phantoms, spanning a contrast range of 0.3-1%. Both MTF and LCD measurements agree with simulated data.

Development of an electromagnetic imaging system for well bore integrity inspection

State-of-the-art imaging technologies for monitoring the integrity of oil and gas well bores are typically limited to the inspection of metal casings and cement bond interfaces close to the first casing region. The objective of this study is to develop and evaluate a novel well-integrity inspection system that is capable of providing enhanced information about the flaw structure and topology of hydrocarbon producing well bores. In order to achieve this, we propose the development of a multi-element electromagnetic (EM) inspection tool that can provide information about material loss in the first and second casing structure as well as information about eccentricity between multiple casing strings. Furthermore, the information gathered from the EM inspection tool will be combined with other imaging modalities (e.g. data from an x-ray backscatter imaging device). The independently acquired data are then fused to achieve a comprehensive assessment of integrity with greater accuracy. A test rig composed of sev...

Image-based characterization of microfocus x-ray target failure

X-ray targets in microfocus x-ray tubes fail primarily due to sublimation and evaporation of tungsten while exposed to the electron beam. The temperature at the point of impact of the electron beam depends on the beam energy (200-300 kV), the beam current (<10 mA), the cross section (<1 mm) and the intensity profile. In order to preserve the target for a reasonable lifetime, temperatures at the spot do not typically exceed 2500 C. As tungsten evaporates from the surface of the target, the surface starts to pit and this can affect the x-ray production in multiple ways: the photon flux decreases, the heel effect is enhanced, the effective spot size changes shape and/or size. Indirectly, the target damage incurred over time or due to intense use will undermine the image quality by reducing image contrast, changing the resolution or degrading the signal to noise ratio. A detailed description of how x-ray target damage is incurred and the potential impact on image quality is reviewed in detail. Experimental results showing the target damage and associated loss of image quality are discussed.