Wim Weyenberg

Mucoadhesive ocular insert based on thiolated poly(acrylic acid): development and in vivo evaluation in humans

The aim of the study was to develop a mucoadhesive ocular insert for the controlled delivery of ophthalmic drugs and to evaluate its efficacy in vivo. The inserts tested were based either on unmodified or thiolated poly(acrylic acid). Water uptake and swelling behavior of the inserts as well as the drug release rates of the model drugs fluorescein and two diclofenac salts with different solubility properties were evaluated in vitro. Fluorescein was used as fluorescent tracer to study the drug release from the insert in humans. The mean fluorescein concentration in the cornea/tearfilm compartment as a function of time was determined after application of aqueous eye drops and inserts composed of unmodified and of thiolated poly(acrylic acid). The acceptability of the inserts by the volunteers was also evaluated. Inserts based on thiolated poly(acrylic acid) were not soluble and had good cohesive properties. A controlled release was achieved for the incorporated model drugs. The in vivo study showed that inserts based on thiolated poly(acrylic acid) provide a fluorescein concentration on the eye surface for more than 8 h, whereas the fluorescein concentration rapidly decreased after application of aqueous eye drops or inserts based on unmodified poly(acrylic acid). Moreover, these inserts were well accepted by the volunteers. The present study indicates that ocular inserts based on thiolated poly(acrylic acid) are promising new solid devices for ocular drug delivery.

PLGA nanoparticles and nanosuspensions with amphotericin B: Potent in vitro and in vivo alternatives to Fungizone and AmBisome.

This paper describes the development of poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) and nanosuspensions with the polyene antibiotic amphotericin B (AmB). The nanoformulations were prepared using nanoprecipitation and were characterised with respect to size, zeta potential, morphology, drug crystallinity and content. Standard in vitro sensitivity tests were performed on MRC-5 cells, red blood cells, Leishmania infantum promastigotes and intracellular amastigotes and the fungal species Candida albicans, Aspergillus fumigatus and Trichophyton rubrum. The in vivo efficacy was assessed and compared to that of Fungizone and AmBisome in the acute A. fumigatus mouse model at a dose of 2.5 and 5.0mg/kg AmB equivalents. The developed AmB nanoformulations were equivalently or more effective against the different Leishmania stages and axenic fungi in comparison with the free drug. The in vitro biological activity, and especially hemolytic activity, clearly depended on the preparation parameters of the different nanoformulations. Further, we demonstrated that the superior in vitro antifungal activity could be extrapolated to the in vivo situation. At equivalent dose, the optimal AmB-loaded PLGA NP was about two times and the AmB nanosuspension about four times more efficacious in reducing the total burden than AmBisome. The developed AmB nanomedicines could represent potent and cost-effective alternatives to Fungizone and AmBisome.

Development and characterization of mucoadhesive chitosan films for ophthalmic delivery of cyclosporine A

Ocular chitosan films were prepared in order to prolong ocular delivery of cyclosporine A. The mucoadhesive films were prepared using the solvent casting evaporation method. A 2(4) full factorial design was used to evaluate the effect of 4 preparation parameters on the film thickness, swelling index and mechanical properties. Moreover, uniformity of content and in vitro drug release were investigated. Possible interactions between the film excipients were studied by FTIR analysis. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the chitosan films. Film thickness, water uptake, mechanical properties and in vitro release of cyclosporine A were dependent on film composition, especially on the amount of plasticizer. Lower drug release was measured from chitosan films containing a higher amount of plasticizer as glycerol decreased the swelling of chitosan films. FTIR spectra suggest a reorganization of hydrogen bonds between chitosan chains in the presence of glycerol and cyclodextrins. None of the film formulations showed significant cytotoxicity as compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A dispersed in the various film formulations remained anti-inflammatorily active as significant suppression of interleukin-2 secretion in concanavalin A stimulated Jurkat T cells was measured.

Characterization and in vivo evaluation of ocular bioadhesive minitablets compressed at different forces.

The influence of the compression force on the physical properties, the in vitro release and the in vivo behavior of ocular minitablets is evaluated in the present study. The bioerodible minitablets (Ø 2 mm, 6 mg) were produced at different compression forces. The crushing strength, friability, water uptake, hydration and swelling of the minitablets both in vitro as well as in vivo after application in the cul-de-sac were evaluated. The friability remained below 1% only for the minitablets made at 0.500 and 0.750 kN. The crushing strength measured was 3.53+/-0.98, 12.34+/-1.69 and 18.64+/-2.37 N for minitablets made at 0.250, 0.500 and 0.750 kN, respectively. The full hydration time equalled 20 and 30 min for minitablets compressed at 0.250 kN and 0.500-0.750 kN, respectively. Increasing the compression force resulted in a decreased swelling capacity. The in vivo release was evaluated in healthy volunteers using a non-invasive method to measure the apparent sodium fluorescein concentration in the tearfilm-cornea compartment as a function of time. The longest residence time of the fluorescent tracer at the administration site was obtained by the minitablets compressed at 0.750 kN. The in vitro release was evaluated with three different dissolution methods: the reciprocating cylinder method, vials in an oscillatory shaking bath and a static method with vials. The best correlation with the in vivo behavior of the matrix minitablets was obtained with the shaking bath method.

Full factorial design, physicochemical characterisation and biological assessment of cyclosporine A loaded cationic nanoparticles.

Cyclosporine A loaded poly(lactide-co-glycolide) nanoparticles coated with chitosan were prepared using the o/w emulsification solvent evaporation method. A 2(3) full factorial design was used to investigate the effect of 3 preparation parameters on the particle size, polydispersity index, zeta potential and drug release. In vitro experiments were performed in order to evaluate the cytotoxicity and anti-inflammatory activity of the developed nanoparticles. Particle sizes varied from 156 nm to 314 nm, and polydispersity index values of 0.07-0.56 were obtained depending on the different preparation parameters. All nanoparticles showed positive zeta potential values. Nanoparticles prepared with the highest concentration chitosan retained a positive zeta potential after dispersion in simulated lachrymal fluid, which supports the possibility of an electrostatic interaction between these particles and the negatively charged mucus layer at the eye. The in vitro release profile of cyclosporine A from the chitosan-coated nanoparticles was strongly dependent on the release medium used. None of the cationic nanoparticle formulations showed significant cytotoxicity compared to the negative control using human epithelial cells (HaCaT). Cyclosporine A encapsulated in the various nanoparticle formulations remained anti-inflammatory active as significant suppression of interleukine-2 secretion in concanavalin A stimulated Jurkat T cells was observed.

In vitro evaluation of gentamicin- and vancomycin-containing minitablets as a replacement for fortified eye drops.

Objective: Ocular bioadhesive minitablets containing gentamicin and vancomycin were developed using different powder mixtures of pregelatinized starch and Carbopol (physical or cospray-dried mixtures). Methods: Drug content, antimicrobial activity, and radical formation of the powders used for tablet preparation were evaluated immediately and 30 days after gamma sterilization. Tablet properties and in vitro drug release from the sterilized minitablets were determined. Storage stability of vancomycin and gentamicin in sterilized bioadhesive mixtures was examined by LC–UV/MS and a microbiological assay, respectively. A bioadhesive powder mixture containing only vancomycin was irradiated by X electron-magnetic radiation to evaluate vancomycin stability following sterilization through irradiation. Results: The antimicrobial activity of gentamicin against Staphylococcus epidermidis was not altered in comparison to nonsterilized formulations. Only after an overkill dose of 50 kGy, the concentration of vancomycin decreases to an extent that was pharmaceutically significant. No significant difference in radiation stability between drug substance and product (i.e., powder mixture) was observed. A shift in stability profile was not observed at 6 weeks after irradiation. All other degradation products were present only in small quantities not exceeding 1.0%. The in vitro drug release from the minitablets prepared with physical powder mixtures of pregelatinized starch and Carbopol® 974P NF (96 : 4) was faster compared to the cospray-dried mixtures of starch with Carbopol® 974P NF (ratio: 95:5 and 85:15). The electron paramagnetic resonance signals of the radicals formed during sterilization were still visible after storage for 30 days. The slug mucosal irritation test indicated mild irritation properties of the bioadhesive powder mixtures although no tissue damage was observed.

Evaluation of a newly developed HPMC ophthalmic insert with sustainehttp://10.10.23.106:8080/TDXPSLIVEGANG/gateway/elsevierjournal/index.jsp#d release properties as a carrier for thermolabile therapeutics

A novel drug delivery system (DDS) with sustained release properties was developed to allow ocular protein delivery. The DDS developed is aimed at overcoming stability issues during preparation such as denaturation of proteins caused by shear forces applied or due to elevated temperatures and air entrapment potentially causing oxidation of the molecule. The rod-shaped HPMC inserts were loaded with lysozyme and several HPMC types were studied and compared. An aqueous colloidal HPMC solution (hydrogel) was prepared and subsequently dried at 150°C to dehydrate the polymer solution. This partially dehydrated polymer cylinder was loaded with an aqueous glycerol/lysozyme solution at 2°C. A 2(4) full factorial design was set up to evaluate the effect of the different preparation parameters on water uptake and release properties. As a result, four out of sixteen formulations revealed homogenous distribution for lysozyme in both duplicates. The change in water uptake over time was dependent on the type of HPMC polymer used but not between the chosen HPMC percentages. After 240min, 50% of lysozyme loaded was released depending on the chosen formulation. Lysozyme molecules exhibit slower release from a K100M matrix compared to E10M inserts, albeit the overall effect is relatively limited.

Optimisation of HPMC ophthalmic inserts with sustained release properties as a carrier for thermolabile therapeutics

A methodology was developed and optimised for the preparation of a new drug delivery system (DDS) with sustained release properties to allow ocular protein delivery and to limit destructive production steps during manufacturing. Elevated temperatures, shear forces and an oxidative environment should be avoided in order to prevent denaturation or oxidation of proteins. An aqueous HPMC solution was prepared using heat and casted into small semi-rod-shaped PVC blisters. The polymer solution was allowed to cool down and was partially dehydrated at room temperature. A drug solution containing glycerol, drug and water was subsequently added to rehydrate the partially dehydrated polymer matrix at a temperature of 2°C. Several parameters of the production process were varied to determine their influence on the release kinetics from HPMC inserts from three different molecules of different molecular weight. This production method was further optimised in order to shorten the rehydration time from weeks to days, while eliminating heat and shear forces on the selected drug molecules sodium fluorescein, lysozyme and albumin. Slow release kinetics were achieved for sodium fluorescein and lysozyme as model drug molecules. The higher molecular weight of albumin prevented a good penetration into the insert during the rehydration process resulting in predominantly burst release. The biocompatibility of a viscous HPMC solution was evaluated on SV40-human corneal epithelial cells with PrestoBlue® and no cytotoxic effects were observed.