Wojciech Skierucha

A manually controlled TDR soil moisture meter operating with 300 ps rise-time needle pulse

SummaryThe principle of operation of a simple, manually controlled Time Domain Reflectometer (TDR meter) for soil moisture measurements, which operates with a needle pulse of 300 ps rise-time, is described. A block diagram and constructions are also given. Construction of a switchless multiple sensor probe, having an inherent delay reference, is presented. Results of measurements of the soil dielectric constant as related to water content, for soils having different bulk densities, textures and humus content show a high correlation. The results agree closely with other investigators measurements with different, more expensive, TDR instruments. The general principle of microprocessor-controlled TDR operated soil moisture meter is considered.

A FDR Sensor for Measuring Complex Soil Dielectric Permittivity in the 10–500 MHz Frequency Range

Mechanical details as well as electrical models of FDR (frequency domain reflectometry) sensors for the measurement of the complex dielectric permittivity of porous materials are presented. The sensors are formed from two stainless steel parallel waveguides of various lengths. Using the data from VNA (vector network analyzer) with the connected FDR sensor and selected models of the applied sensor it was possible obtain the frequency spectrum of dielectric permittivity from 10 to 500 MHz of reference liquids and soil samples of various moisture and salinity. The performance of the analyzed sensors were compared with TDR (time domain reflectometry) ones of similar mechanical construction.

A TDR-Based Soil Moisture Monitoring System with Simultaneous Measurement of Soil Temperature and Electrical Conductivity

Elements of design and a field application of a TDR-based soil moisture and electrical conductivity monitoring system are described with detailed presentation of the time delay units with a resolution of 10 ps. Other issues discussed include the temperature correction of the applied time delay units, battery supply characteristics and the measurement results from one of the installed ground measurement stations in the Polesie National Park in Poland.

Dielectric spectroscopy in agrophysics

Dielectric spectroscopy in agrophysics The paper presents scientific foundation and some examples of agrophysical applications of dielectric spectroscopy techniques. The aim of agrophysics is to apply physical methods and techniques for studies of materials and processes which occur in agriculture. Dielectric spectroscopy, which describes the dielectric properties of a sample as a function of frequency, may be successfully used for examinations of properties of various materials. Possible test materials may include agrophysical objects such as soil, fruit, vegetables, intermediate and final products of the food industry, grain, oils, etc. Dielectric spectroscopy techniques enable non-destructive and non-invasive measurements of the agricultural materials, therefore providing tools for rapid evaluation of their water content and quality. There is a limited number of research in the field of dielectric spectroscopy of agricultural objects, which is caused by the relatively high cost of the respective measurement equipment. With the fast development of modern technology, especially in high frequency applications, dielectric spectroscopy has great potential of expansion in agrophysics, both in cognitive and utilitarian aspects.

Determination of Soil Pore Water Salinity Using an FDR Sensor Working at Various Frequencies up to 500 MHz

This paper presents the application of a frequency-domain reflectometry (FDR) sensor designed for soil salinity assessment of sandy mineral soils in a wide range of soil moisture and bulk electrical conductivity, through the determination of soil complex dielectric permittivity spectra in the frequency range 10–500 MHz. The real part of dielectric permittivity was assessed from the 380–440 MHz, while the bulk electrical conductivity was calculated from the 165–325 MHz range. The FDR technique allows determination of bulk electrical conductivity from the imaginary part of the complex dielectric permittivity, without disregarding the dielectric losses. The soil salinity status was determined using the salinity index, defined as a partial derivative of the soil bulk electrical conductivity with respect to the real part of the soil complex dielectric permittivity. The salinity index method enables determining the soil water electrical conductivity value. For the five sandy mineral soils that have been tested, the relationship between bulk electrical conductivity and the real part of dielectric permittivity is essentially linear. As a result, the salinity index method applied for FDR measurements may be adapted to field use after examination of loam and clayey soils.

Application of a Coaxial-Like Sensor for Impedance Spectroscopy Measurements of Selected Low-Conductivity Liquids

The paper presents a coaxial-like sensor operating in the 20 Hz–2 MHz frequency range used to determine the electrical properties of selected liquids of low electrical conductivity. Examined materials included low-concentrated aqueous solutions of potassium chloride, sodium chloride and trisodium citrate, which are common food additives. Impedance spectra of the measurement cell filled with particular liquids were obtained and analyzed using the electrical equivalent circuit approach. The values of physical quantities and parameters describing the equivalent circuit components, including a constant phase element, were calculated for each sample. The applied sensor was also calibrated for electrical conductivity measurements up to 8 mS/m. The constant phase element parameters differed among the studied solutions and concentrations. This may provide a basis for a detection method of small amounts of compounds, such as food additives in low-concentrated aqueous solutions. To demonstrate the potential of the presented method, samples of purchased mineral water and a flavored drink containing various additives were tested.

TDR technique for estimating the intensity of effective non rainfall

Abstract The objective of this paper is to present a method for determining diurnal distribution of the intensity of effective non rainfall water flux. It was found that the application of TDR technique for the determination of diurnal dynamics of effective non rainfall water flux requires temperature correction of sensed volumetric moisture contents. Without temperature correction the error of estimated non rainfall water flux can be as much as 26%. In addition, the effect of temperature changes on the soil surface was determined in 0.5, 1, 2, 3, 4, and 5 hours periods. It was found that the intensity of effective non rainfall water flux was determined to the greatest extent by the rate of temperature drop during the period of 3 h preceding the non rainfall water flux determination. The agreement of non rainfall water flux calculated with the method proposed and that obtained by the collector was better for dew than for hoarfrost periods.

A Time-Domain Reflectometry Method with Variable Needle Pulse Width for Measuring the Dielectric Properties of Materials.

Time-domain reflectometry (TDR) methods used for measuring the dielectric properties of materials mostly utilize step or needle electrical pulses of constant amplitudes and shapes. Our novel approach enables determining the dielectric relaxation time of a sample using the analysis of the amplitudes of reflected pulses of two widths, in addition to bulk dielectric permittivity and electrical conductivity commonly obtained by the TDR technique. The method was developed for various values of electrical conductivity and relaxation time using numerical simulations of a five-rod probe placed in a material with complex dielectric permittivity described by the Debye model with an added electrical conductivity term. The characterization of amplitudes of two pulses of selected widths was done with regard to the dielectric parameters of simulated materials. The required probe parameters were obtained solely from numerical simulations. Verification was performed for the probe placed in aqueous KCl solutions with 14 different electrical conductivity values. The determined relaxation time remained roughly constant and independent of electrical conductivity. The obtained electrical conductivity agreed with the reference values. Our results indicate that the relaxation time, dielectric permittivity and electrical conductivity of the tested solutions can be simultaneously determined using a simple analysis of the amplitude and reflection time of two needle pulses of different widths.

Detection of Atmospheric Water Deposits in Porous Media Using the TDR Technique

Investigating the intensity of atmospheric water deposition and its diurnal distribution is essential from the ecological perspective, especially regarding dry geographic regions. It is also important in the context of monitoring the amount of moisture present within building materials in order to protect them from excessive humidity. The objective of this study was to test a constructed sensor and determine whether it could detect and track changes in the intensity of atmospheric water deposition. An operating principle of the device is based on the time-domain reflectometry technique. Two sensors of different plate volumes were manufactured. They were calibrated at several temperatures and tested during field measurements. The calibration turned out to be temperature independent. The outdoor measurements indicated that the upper limits of the measurement ranges of the sensors depended on the volumes of the plates and were equal to 1.2 and 2.8 mm H2O. The respective sensitivities were equal to 3.2 × 10−3 and 7.5 × 10−3 g·ps−1. The conducted experiments showed that the construction of the designed device and the time-domain reflectometry technique were appropriate for detecting and tracing the dynamics of atmospheric water deposition. The obtained outcomes were also collated with the readings taken in an actual soil sample. For this purpose, an open container sensor, which allows investigating atmospheric water deposition in soil, was manufactured. It turned out that the readings taken by the porous ceramic plate sensor reflected the outcomes of the measurements performed in a soil sample.

Erratum to: Coarse woody debris of Fagus sylvatica produced a quantitative organic carbon imprint in an andic soil

Coarse woody debris (CWD) is involved in important forest ecosystem functions and processes, e.g., habitat provision, water retention, and organic matter decomposition. However, a quantitative, CWD-produced soil organic carbon (SOC) imprint has not yet been detected, possibly due to lack of free adsorption sites on soil minerals. To circumvent this potential constraint, we selected plots with and without CWD in a beech (Fagus sylvatica L.) primeval forest in the West Carpathian volcanic range (Slovakia). Local andic soil contains abundant allophane and amorphous Fe-compounds as important SOC binding agents. The C concentration in the fine earth of sampled soils was determined by the dry combustion method. We established that organic carbon concentration decreased with depth from 0.20 kg kg−1 (0.0–0.3 m) to 0.11 kg kg−1 (0.3–0.5 m) in soil with CWD and from 0.13 kg kg−1 (0.0–0.3 m) to 0.07 kg kg−1 (0.3–0.5 m) in soil without CWD. The respective average differences in soil organic carbon concentration (0.07 kg kg−1) and stock (15.84 kg m−2) between the two series of plots within the upper 0.3 m were significant according to the t test (P < 0.05 or P < 0.01, respectively). Also, corresponding differences within the 0.3–0.5 m layer (0.04 kg kg−1 and 5.51 kg m−2) were significant (P < 0.05, P < 0.001). Our results represent the first indication that CWD-produced SOC imprint may reach deeper than just a few centimeters in soils featuring high adsorption capacity, such as Andosols.