Wuiwui Chauhari Tjiu

Preparation and characterization of nylon 11/organoclay nanocomposites

Nylon 11/organoclay nanocomposites have been successfully prepared by melt-compounding. X-ray diffraction and transmission electron microscopy indicate the formation of the exfoliated nanocomposites at low clay concentrations (less than 4 wt%) and a mixture of exfoliated and intercalated nanocomposites at higher clay contents. Thermogravimetric and dynamic mechanical analyses as well as tensile tests show that the degree of dispersion of nanoclay within polymer matrix plays a vital role in property improvement. The thermal stability and mechanical properties of the exfoliated nylon 11/clay nanocomposites (containing lower clay concentrations) are superior to those of the intercalated ones (with higher clay contents), due to the finer dispersion of organoclay among the matrix.

Electrospinning of Polyvinylidene Difluoride with Carbon Nanotubes: Synergistic Effects of Extensional Force and Interfacial Interaction on Crystalline Structures

Polyvinylidene difluoride (PVDF) solutions containing a very low concentration of single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) of similar surface chemistry, respectively, were electrospun, and the nanofibers formed were collected using a modified rotating disk collector. The polymorphic behavior and crystal orientation of the nanofibers were studied using wide-angle X-ray diffraction and infrared spectroscopy, while the nanotube alignment and interfacial interactions in the nanofibers were probed by transmission electron microscopy and Raman spectroscopy. It is shown that the interfacial interaction between the SWCNTs and PVDF and the extensional force experienced by the nanofibers in the electrospinning and collection processes can work synergistically to induce highly oriented beta-form crystallites extensively. In contrast, the MWCNTs could not be well aligned along the nanofiber axis, which leads to a lower degree of crystal orientation.

Synthesis of vertically aligned carbon nanotubes on metal deposited quartz plates

Without plasma aid, we have successfully synthesized vertically aligned carbon nanotubes (CNTs) on iron-, cobalt- or nickel-deposited quartz plates by chemical vapor deposition with ethylenediamine as a precursor. The amine serves as both etching reagent for the formation of metal nanoparticles and carbon source for the growth of aligned carbon nanotubes. The carbon nanotubes were vertically aligned in high density on a large area of the plain silica substrates. The density and diameter of CNTs is determined by the thickness of the deposited metal film and the length of the tubes can be controlled by varying the reaction time. High-resolution transmission electron microscopy analysis reveals that the synthesized CNTs are multiwalled with a bamboo-like structure. Energy dispersive X-ray spectra demonstrate that the CNTs are formed as tip growths. Raman spectrum provides definite evidence that the prepared CNTs are multiwalled graphitic structure.

Improving hydrophilicity, mechanical properties and biocompatibility of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] through blending with poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene oxide).

Natural source poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (PHBV) with a low hydroxyvalerate (HV) content ( approximately 8wt.%) was modified by blending it with poly[(R)-3-hydroxybutyrate]-alt-poly(ethylene oxide) (HE) alternating block copolymer. We hypothesized that the adjoining PHB segments could improve the miscibility of the poly(ethylene oxide) segments of HE with the PHBV matrix and therefore improve the physical properties of the PHBV/HE blends. A differential scanning calorimetry study revealed the improved miscibility of PEO segments of HE characterized by the interference of the crystallization of PHBV. The decrease in water contact angle and the increase in equilibrium water uptake of the PHBV/HE blends indicated that both the surface and bulk hydrophilicity of PHBV could be improved through blending HE. The mechanical properties of the hydrated PHBV/HE blends were assessed by measuring their tensile strength. In contrast to the hydrated natural source PHBV, which failed in a brittle manner, the hydrated PHBV/HE blends were ductile. Their strain at break increased with increasing HE content, reaching a maximum of 394% at an HE content of 15wt.%. The excellent integrity of the PHBV/HE blends in water is attributed to the strong affinity between the PHB segments of HE and the PHBV matrix. Platelet adhesion on the film surface of the PHBV/HE blends was investigated in vitro to evaluate their blood compatibility. The results demonstrated that the PHBV/HE blends effectively resisted the adhesion of platelets due to the anchored PEO segments from HE on the film surface.

Preparation and Characterization of Polyurethane/Multiwalled Carbon Nanotube Composites

Multiwalled carbon nanotube (MWNT)/polyurethane (PU) nanocomposites have been prepared by the combination of in-situ polymerization and solution-casting approach. A homogeneous dispersion of MWNTs throughout PU matrix is observed by scanning electron microscopy on the fracture surfaces of the composites. Strong interfacial adhesion between the MWNTs and the PU matrix, as evidenced by the presence of broken but strongly embedded MWNTs in the matrix, is favorable to stress transfer from polymer matrix to the nanotubes. Mechanical tests (by tensile testing and dynamic mechanical analysis) show that, compared with neat PU, both the Youngs modulus and the tensile strength of the composites are significantly improved by about 90%, with incorporating only 1 wt.% MWNTs. And most importantly, the elongation-at-break of PU/carbon nanotube (CNT) composites is greatly improved by about 500%, indicating that the toughness of neat PU is remarkably enhanced by adding CNTs into the matrix. The fine dispersion of CNTs and strong interfacial adhesion between the CNTs with the matrix are responsible for the simultaneous and significant enhancement in the strengthening and toughening of PU matrix. In addition, the thermal stability of PU was also improved after incorporating CNTs into the matrix.