Wuzhu Sun

Creation of Cu2O@TiO2 Composite Photocatalysts with p-n Heterojunctions Formed on Exposed Cu2O Facets, Their Energy Band Alignment Study, and Their Enhanced Photocatalytic Activity under Illumination with Visible Light

The creation of photocatalysts with controlled facets has become an important approach to enhance their activity. However, how the formation of heterojunctions on exposed facets could affect their photocatalytic performance ranking had not yet been investigated. In this study, Cu2O@TiO2 core-shell structures were created, and Cu2O/TiO2 p-n heterojunctions were formed on various exposed facets of Cu2O cubes, Cu2O cuboctahedra, and Cu2O octahedra, respectively. These Cu2O@TiO2 polyhedra demonstrated an enhanced photocatalytic degradation effect on Methylene Blue (MB) and 4-nitrophenol (4-NP) under visible light illumination, because of the enhanced charge carrier separation by the formation of Cu2O@TiO2 p-n heterojunctions. It was further found that their photocatalytic performance was also facet-dependent as pure Cu2O polyhedra, while the photocatalytic performance ranking of these Cu2O@TiO2 polyhedra was different with that of their corresponding Cu2O polyhedron cores. By the combination of optical property measurement and XPS analysis, the energy band alignments of these Cu2O@TiO2 polyhedra were determined, which demonstrated that Cu2O@TiO2 octahedra had the highest band offset for the separation of charge carriers. Thus, the charge-carrier-separation-driven force in Cu2O@TiO2 polyhedra was different from their corresponding Cu2O polyhedron cores, which resulted in their different surface photovoltage spectrum (SPS) responses and different photocatalytic performance rankings.

Highly efficient catalytic reduction of bromate in water over a quasi-monodisperse, superparamagnetic Pd/Fe3O4 catalyst

A novel quasi-monodisperse, superparamagnetic Pd/Fe3O4 catalyst was synthesized for effective catalytic bromate reduction. The catalyst was prepared by dispersing nanoparticles of Pd (weight percent up to 1%) on the surface of superparamagnetic Fe3O4 microspheres with 300–500 nm in diameter and 10–20 nm in grain size. Complete reduction of bromate by this Pd/Fe3O4 catalyst was demonstrated within a short period (<2 h) over a range of pH values, in the presence of a variety of co-existing ions, and after multiple cycles. In addition, the superparamagnetic nature of the catalyst enhanced its good dispersion in water during water treatment when there was no external magnetic field, and its high saturation magnetization allowed an easy magnetic separation from water when an external magnetic field was applied after the water treatment. Thus, it could be easily recycled and reused, further enhancing its application potential.

Synthesis of Mn3O4/CeO2 Hybrid Nanotubes and Their Spontaneous Formation of a Paper-like, Free-Standing Membrane for the Removal of Arsenite from Water

One-dimensional nanomaterials may organize into macrostructures to have hierarchically porous structures, which could not only be easily adopted into various water treatment apparatus to solve the separation issue of nanomaterials from water but also take full advantage of their nanosize effect for enhanced water treatment performance. In this work, a novel template-based process was developed to create Mn3O4/CeO2 hybrid nanotubes, in which a redox reaction happened between the OMS-2 nanowire template and Ce(NO3)3 to create hybrid nanotubes without the template removal process. Both the Ce/Mn ratio and the precipitation agent were found to be critical in the formation of Mn3O4/CeO2 hybrid nanotubes. Because of their relatively large specific surface area, porous structure, high pore volume, and proper surface properties, these Mn3O4/CeO2 hybrid nanotubes demonstrated good As(III) removal performances in water. These Mn3O4/CeO2 hybrid nanotubes could form paper-like, free-standing membranes spontaneously by a self-assembly process without high temperature treatment, which kept the preferable properties of Mn3O4/CeO2 hybrid nanotubes while avoiding the potential nanomaterial dispersion problem. Thus, they could be readily utilized in commonly used flow-through reactors for water treatment purposes. This approach could be further applied to other material systems to create various hybrid nanotubes for a broad range of technical applications.

Superior As(III) removal performance of hydrous MnOOH nanorods from water

Hydrous manganite (MnOOH) nanorods were synthesized by a simple precipitation process in ethanol at room temperature, which eliminated high temperature calcination or a hydrothermal process in the creation of most manganese oxide-based adsorbents and resulted in low energy consumption and subsequently low production cost. These MnOOH nanorods had a high specific surface area at ∼165.9 m2 g−1 and their total pore volume was ∼0.561 cm3 g−1, which was beneficial to their arsenic removal performance. These MnOOH nanorods demonstrated a superior As(III) removal performance from an aqueous environment. At near neutral conditions (pH ∼ 7), their arsenic adsorption capacity was over 431.2 mg g−1, which was among the highest reported values in the literature. The superior As(III) removal performance of these MnOOH nanorods relied on the adsorption and subsequent oxidation of As(III) to less mobilized/toxic As(V), and its fixation on their surface to form inner-sphere arsenic surface complexes.

Synthesis of Superparamagnetic Core-Shell Structure Supported Pd Nanocatalysts for Catalytic Nitrite Reduction with Enhanced Activity, No Detection of Undesirable Product of Ammonium, and Easy Magnetic Separation Capability

Superparamagnetic nanocatalysts could minimize both the external and internal mass transport limitations and neutralize OH(-) produced in the reaction more effectively to enhance the catalytic nitrite reduction efficiency with the depressed product selectivity to undesirable ammonium, while possess an easy magnetic separation capability. However, commonly used qusi-monodispersed superparamagnetic Fe3O4 nanosphere is not suitable as catalyst support for nitrite reduction because it could reduce the catalytic reaction efficiency and the product selectivity to N2, and the iron leakage could bring secondary contamination to the treated water. In this study, protective shells of SiO2, polymethylacrylic acid, and carbon were introduced to synthesize Fe3O4@SiO2/Pd, Fe3O4@PMAA/Pd, and Fe3O4@C/Pd catalysts for catalytic nitrite reduction. It was found that SiO2 shell could provide the complete protection to Fe3O4 nanosphere core among these shells. Because of its good dispersion, dense structure, and complete protection to Fe3O4, the Fe3O4@SiO2/Pd catalyst demonstrated the highest catalytic nitrite reduction activity without the detection of NH4(+) produced. Due to this unique structure, the activity of Fe3O4@SiO2/Pd catalysts for nitrite reduction was found to be independent of the Pd nanoparticle size or shape, and their product selectivity was independent of the Pd nanoparticle size, shape, and content. Furthermore, their superparamagnetic nature and high saturation magnetization allowed their easy magnetic separation from treated water, and they also demonstrated a good stability during the subsequent recycling experiment.

Post-illumination activity of SnO2 nanoparticle-decorated Cu2O nanocubes by H2O2 production in dark from photocatalytic "memory"

Most photocatalysts only function under illumination, while many potential applications require continuous activities in dark. Thus, novel photocatalysts should be developed, which could store part of their photoactivity in “memory” under illumination and then be active from this “memory” after the illumination is turned off for an extended period of time. Here a novel composite photocatalyst of SnO2 nanoparticle-decorated Cu2O nanocubes is developed. Their large conduction band potential difference and the inner electrostatic field formed in the p-n heterojunction provide a strong driving force for photogenerated electrons to move from Cu2O to SnO2 under visible light illumination, which could then be released to react with O2 in dark to produce H2O2 for its post-illumination activity. This work demonstrates that the selection of decoration components for photocatalysts with the post-illumination photocatalytic “memory” could be largely expanded to semiconductors with conduction band potentials less positive than the two-electron reduction potential of O2.

In situ growth of TiO2 on TiN nanoparticles for non-noble-metal plasmonic photocatalysis

Plasmonic photocatalysis could provide a promising solution to the two fundamental problems of current TiO2-based visible-light photocatalysis on low photocatalytic efficiency and low usage of solar illumination. But till now, most plasmonic photocatalysts have relied on noble metal nanostructures of Au or Ag due to their easy synthesis and efficient absorption of visible light. In this study, a TiN/TiO2 nanocomposite photocatalyst was synthesized by the in situ growth of TiO2 nanoparticles on TiN nanoparticles with a fluorine-free, vapor-phase hydrothermal process. In this composite photocatalyst system, the desirable visible light absorption could be attributed to the LSPR effect of a nanostructured TiN phase. Thus, a plasmonic photocatalyst without noble-metal components was developed, and its good visible light photocatalytic activity was demonstrated by both the photodegradation of organic pollutants of RhB and 4-NP and the disinfection of microorganisms of E. coli. From the energy alignment analysis, hot electrons were expected to be completely injected from TiN to TiO2 once they were excited above the Fermi energy level of TiN because no barrier existed, resulting in better electron injection efficiency than previous reported noble-metal-based plasmonic photocatalysts.

Synthesis of tin oxide nanospheres under ambient conditions and their strong adsorption of As(III) from water

The development of highly efficient As(iii) adsorbents is critical to largely simplify the arsenic treatment process and lower its cost. For the first time, SnO2 nanospheres were demonstrated to possess a highly efficient As(iii) adsorption capability from water in a near neutral pH environment as predicted by the material criterion we recently developed for the selection of highly efficient arsenic adsorbents. These SnO2 nanospheres were synthesized by a simple and cost-effective hydrolysis process with the assistance of ethyl acetate under ambient conditions, which had a good dispersity, a narrow size distribution, a relatively large specific surface area, and a porous structure. A fast As(iii) adsorption was observed in the kinetics study on these SnO2 nanospheres, and their Langmuir adsorption capacity was determined to be ∼112.7 mg g(-1) at pH ∼7. The As(iii) adsorption mechanism on SnO2 nanospheres was examined by both macroscopic and microscopic techniques, which demonstrated that it followed the inner-sphere complex model. These SnO2 nanospheres demonstrated effective As(iii) adsorption even with exceptionally high concentrations of co-existing ions, and a good regeneration capability by washing with NaOH solution.

Creation of Pd/Al 2 O 3 Catalyst by a Spray Process for Fixed Bed Reactors and Its Effective Removal of Aqueous Bromate

Palladium nanoparticles were grown on sub-millimeter activated Al2O3 particle support by spraying H2PdCl4 solution evenly onto the support, followed with a thermal reduction under H2 atmosphere. Compared with its counterpart created by the conventional impregnation method, the Pd/Al2O3 catalyst created by the spray process could enrich the existence of active Pd nanoparticles on the surface of the catalyst support and increase their degree of dispersion, resulting in a much higher activity in the catalytic reduction of bromate in water. The effect of Al2O3 support particle size on the bromate removal rate was also investigated, which demonstrated that smaller support particle size could have higher activity in the catalytic reduction of bromate in water because of its larger exposed surface. This Pd/Al2O3 catalyst could be easily used in the fixed bed reactor due to its large support size and demonstrated excellent stability in the catalytic reduction of bromate in mineral water. This Pd/Al2O3 catalyst also exhibited a good catalytic reduction performance on azo dyes as demonstrated by its effective catalytic hydrogenation of methyl orange. Thus, catalysts prepared by the spray method developed in this work could have the potential to be used in fixed bed reactors for various water treatment practices.