X. Vecino

Valorization of winery waste vs. the costs of not recycling.

Wine production generates huge amounts of waste. Before the 1990s, the most economical option for waste removal was the payment of a disposal fee usually being of around 3000 Euros. However, in recent years the disposal fee and fines for unauthorized discharges have increased considerably, often reaching 30,000-40,000 Euros, and a prison sentence is sometimes also imposed. Some environmental friendly technologies have been proposed for the valorization of winery waste products. Fermentation of grape marc, trimming vine shoot or vinification lees has been reported to produce lactic acid, biosurfactants, xylitol, ethanol and other compounds. Furthermore, grape marc and seeds are rich in phenolic compounds, which have antioxidants properties, and vinasse contains tartaric acid that can be extracted and commercialized. Companies must therefore invest in new technologies to decrease the impact of agro-industrial residues on the environment and to establish new processes that will provide additional sources of income.

Study of the physical properties of calcium alginate hydrogel beads containing vineyard pruning waste for dye removal

In this work the morphological and surface properties of a biocomposite formulated with vineyard pruning waste entrapped in calcium alginate hydrogel beads were studied. The formulation of the calcium alginate hydrogel beads, containing vineyard pruning waste, was based on the capacity of this green adsorbent to remove dye compounds from wastewater, observing that in the optimum condition (1.25% of cellulosic residue, 2.2% of sodium alginate and 0.475 mol L(-1) CaCl2) the percentage of dyes was reduced up to 74.6%. At lower concentration of CaCl2, high-resolution optical images show that the elongation of the vineyard-alginate biocomposite decreased, whereas the compactness increased. Moreover, higher concentrations of cellulosic residue increased the biocomposite roundness in comparison with biocomposite without the cellulosic residue. Interferometric perfilometry analysis (Ra, Rq, Rz and Rt) revealed that high concentrations of CaCl2 increased the roughness of the of the calcium alginate hydrogel beads observing vesicles in the external surface.

Partial Characterization of Biosurfactant from Lactobacillus pentosus and Comparison with Sodium Dodecyl Sulphate for the Bioremediation of Hydrocarbon Contaminated Soil

The capability of a cell bound biosurfactant produced by Lactobacillus pentosus, to accelerate the bioremediation of a hydrocarbon-contaminated soil, was compared with a synthetic anionic surfactant (sodium dodecyl sulphate SDS-). The biosurfactant produced by the bacteria was analyzed by Fourier transform infrared spectroscopy (FTIR) that clearly indicates the presence of OH and NH groups, C=O stretching of carbonyl groups and NH nebding (peptide linkage), as well as CH2–CH3 and C–O stretching, with similar FTIR spectra than other biosurfactants obtained from lactic acid bacteria. After the characterization of biosurfactant by FTIR, soil contaminated with 7,000 mg Kg−1 of octane was treated with biosurfactant from L. pentosus or SDS. Treatment of soil for 15 days with the biosurfactant produced by L. pentosus led to a 65.1% reduction in the hydrocarbon concentration, whereas SDS reduced the octane concentration to 37.2% compared with a 2.2% reduction in the soil contaminated with octane in absence of biosurfactant used as control. Besides, after 30 days of incubation soil with SDS or biosurfactant gave percentages of bioremediation around 90% in both cases. Thus, it can be concluded that biosurfactant produced by L. pentosus accelerates the bioremediation of octane-contaminated soil by improving the solubilisation of octane in the water phase of soil, achieving even better results than those reached with SDS after 15-day treatment.

Biosurfactants in cosmetic formulations: trends and challenges

Abstract Cosmetic products play an essential role in everyone’s life. People everyday use a large variety of cosmetic products such as soap, shampoo, toothpaste, deodorant, skin care, perfume, make-up, among others. The cosmetic industry encompasses several environmental, social and economic impacts that are being addressed through the search for more efficient manufacturing techniques, the reduction of waste and emissions and the promotion of personal hygiene, contributing to an improvement of public health and at the same time providing employment opportunities. The current trend among consumers is the pursuit for natural ingredients in cosmetic products, as many of these products exhibit equal, better or additional benefits in comparison with the chemical-based products. In this sense, biosurfactants are natural compounds with great potential in the formulation of cosmetic products given by their biodegradability and impact in health. Indeed, many of these biosurfactants could exhibit a “prebiotic” character. This review covers the current state-of-the-art of biosurfactant research for cosmetic purposes and further discusses the future challenges for cosmetic applications.

Optimization of extraction conditions and fatty acid characterization of Lactobacillus pentosus cell-bound biosurfactant/bioemulsifier

BACKGROUND There is currently much interest in the use of natural biosurfactants and bioemulsifiers, mainly in the cosmetic, pharmaceutical and food industries. However, there are no studies on the optimization of the extraction conditions of cell-bound biosurfactants. In this work, a biosurfactant with emulsifier properties was extracted from Lactobacillus pentosus cells, under different extraction conditions, and characterized. RESULTS During extraction, the most influential independent variable, concerning the emulsifying capacity of biosurfactant, was the operation time, followed by temperature and salt concentration. Biosurfactant from L. pentosus was evaluated by Fourier transform infrared spectroscopy and the composition of fatty acids was analyzed by gas chromatography-mass spectrometry. The hydrophobic chain of the biosurfactant from L. pentosus comprises 548 g kg(-1) linoelaidic acid (C18:2), 221 g kg(-1) oleic or elaidic acid (C18:1), 136 g kg(-1) palmitic acid (C16) and 95 g kg(-1) stearic acid (C18). In addition, emulsions of water and rosemary oil were stabilized with a biosurfactant produced by L. pentosus and compared with emulsions stabilized with polysorbate 20. CONCLUSION The optimum extraction conditions of biosurfactant were achieved at 45 °C at 120 min and using 9 g kg(-1) of salt. In all the assays biosurfactant from L. pentosus yielded more stable emulsions and higher emulsion volumes than polysorbate 20.

Formulation of an alginate-vineyard pruning waste composite as a new eco-friendly adsorbent to remove micronutrients from agroindustrial effluents

The cellulosic fraction of vineyard pruning waste (free of hemicellulosic sugars) was entrapped in calcium alginate beads and evaluated as an eco-friendly adsorbent for the removal of different nutrients and micronutrients (Mg, P, Zn, K, N-NH4, SO4, TN, TC and PO4) from an agroindustrial effluent (winery wastewater). Batch adsorption studies were performed by varying the amounts of cellulosic adsorbent (0.5-2%), sodium alginate (1-5%) and calcium chloride (0.05-0.9M) included in the biocomposite. The optimal formulation of the adsorbent composite varied depending on the target contaminant. Thus, for the adsorption of cationic contaminants (Mg, Zn, K, N-NH4 and TN), the best mixture comprised 5% sodium alginate, 0.05M calcium chloride and 0.5% cellulosic vineyard pruning waste, whereas for removal of anionic compounds (P, SO4 and PO4), the optimal mixture comprised 1% sodium alginate, 0.9M calcium chloride and 0.5% cellulosic vineyard pruning waste. To remove TC from the winery wastewater, the optimal mixture comprised 3% of sodium alginate, 0.475M calcium chloride and 0.5% cellulosic vineyard pruning waste.

Removal of pigments from aqueous solution by a calcium alginate-grape marc biopolymer: a kinetic study.

In this work, the potential use of a biopolymer based on grape marc entrapped in calcium alginate beads for the removal of pigments from an agro industrial effluent was evaluated. The parameters that affect the pigment adsorption such as pH (3.5-7.0), temperature (10-40°C) and initial pigment concentration (6.9-55.1mg/L) were studied by applying an incomplete factorial design. The dependent variables evaluated consisted of color effluent parameters from CIELAB and Tristimulus system, as well as the concentration of pigments in the wastewater after the adsorption treatment. The most significant independent variables tested were the pigments concentration followed by pH, whereas temperature had a negligible effect on the adsorption process. Moreover, at the optimal operational conditions (pH 3.5 and room temperature) kinetic studies were carried out by applying pseudo-first order, pseudo-second order, Chien-Clayton and intraparticle diffusion models, observing a good agreement between theoretical and experimental results.

Study of the Surfactant Properties of Aqueous Stream from the Corn Milling Industry

Corn steep liquor (CSL) is a liquid byproduct generated by the corn wet-milling industry. This agroindustrial residue is obtained when corn is digested with warm water and SO2 in the presence of different spontaneously growing microorganisms. The microbial population of CSL includes lactic acid bacteria, which are widely known to produce biosurfactants. However, there is no information available about the possible existence of surface-active compounds in CSL. In this work the surface tension activity of CSL was evaluated and the biosurfactant contained in this residue was extracted with different organic solvents and characterized. The biosurfactant obtained from CSL was analyzed by Fourier transform infrared spectroscopy, and the composition in fatty acid was analyzed by gas chromatography-mass spectrometry. The hydrophobic chain of the biosurfactant contained in CSL comprised 50-55.2% linolelaidic acid, 15.7-22.2% oleic and/or elaidic acid, 5.9-14.6% stearic acid, and 14.9-19.6% palmitic acid.

Kinetic and morphology study of alginate-vineyard pruning waste biocomposite vs. non modified vineyard pruning waste for dye removal

In this work a comparative bioadsorption study between a biocomposite consisting of hydrolysed vineyard pruning waste entrapped in calcium alginate spheres and non entrapped vineyard residue was carried out. Results have demonstrated that the biocomposite based on lignocellulose-calcium alginate spheres removed 77.3% of dyes, while non entrapped lignocellulose eliminated only removed 27.8% of colour compounds. The experimental data were fitted to several kinetic models (pseudo-first order, pseudo-second order, Chien-Clayton model, intraparticle diffusion model and Bangham model); being pseudo-second order the kinetic model that better described the adsorption of dyes onto both bioadsorbents. In addition, a morphological study (roughness and shape) of alginate-vineyard biocomposite was established under extreme conditions, observing significant differences between hydrated and dehydrated alginate-vineyard biocomposite. The techniques used to carry out this morphological study consisted of scanning electron microscopy (SEM), perfilometry and 3D surface analysis.

Sewage Sludge Polycyclic Aromatic Hydrocarbon (PAH) Decontamination Technique Based on the Utilization of a Lipopeptide Biosurfactant Extracted from Corn Steep Liquor

A decontamination technique based on the utilization of a lipopeptide biosurfactant extracted from corn steep liquor has been developed to eliminate polycyclic aromatic hydrocarbons (PAHs) from sewage sludge. High concentrations of PAHs were used during experiments observing that 408.3 mg/kg of naphthalene was almost completely mobilized and biodegraded, only 1.7% of naphthalene remained in the sewage sludge, whereas anthracene and pyrene were reduced up to 51.7 and 69.4%, respectively. The biodegradation of PAHs was fitted to several kinetic models (zero- and first-order kinetic models), observing good correlation coefficient values when biodegradation was described by the first-order kinetic model. Experimental results suggest that biosurfactant extracted from corn steep liquor may have great potential, as an ecofriendly washing agent, for the treatment of sewage sludge contaminated with PAHs. Therefore, in situ application of natural biosurfactants may be considered to be a good remediation alternative as they are not hazardous for water and soil organisms.