Xianxia Yuan

A review of cathode materials and structures for rechargeable lithium–air batteries

Rechargeable lithium air (Li–air) batteries, especially the non-aqueous type, are considered the most promising energy storage and conversion device candidates for use in future electric vehicle applications due to their ultrahigh energy density. The air cathode has been identified as a key factor affecting the overall performance of Li–air batteries. The current low level performance of air cathodes is the major challenge hindering commercial applications of Li–air batteries. In the past decade, a great many cathode materials, structures and fabrication processes have been developed and investigated with the goal of enhancing cathode performance. This paper reviews, the role of the cathode in non-aqueous Li–air batteries including the cathode reaction mechanisms and the properties and morphologies of cathode materials, followed by approaches to optimize cathode performance. The most recently published global progress and the main achievements in the field of Li–air batteries are also systematically and critically reviewed in terms of cathode materials, structures and fabrication processes, with the objective of providing some state-of-the-art information. Technical challenges are analyzed, and insights into future research directions for overcoming these development challenges of rechargeable non-aqueous Li–air battery cathodes are also identified in this review paper.

Effects of cobalt precursor on pyrolyzed carbon-supported cobalt-polypyrrole as electrocatalyst toward oxygen reduction reaction.

A series of non-precious metal electrocatalysts, namely pyrolyzed carbon-supported cobalt-polypyrrole, Co-PPy-TsOH/C, are synthesized with various cobalt precursors, including cobalt acetate, cobalt nitrate, cobalt oxalate, and cobalt chloride. The catalytic performance towards oxygen reduction reaction (ORR) is comparatively investigated with electrochemical techniques of cyclic voltammogram, rotating disk electrode and rotating ring-disk electrode. The results are analyzed and discussed employing physiochemical techniques of X-ray diffraction, transmission electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, inductively coupled plasma, elemental analysis, and extended X-ray absorption fine structure. It shows that the cobalt precursor plays an essential role on the synthesis process as well as microstructure and performance of the Co-PPy-TsOH/C catalysts towards ORR. Among the studied Co-PPy-TsOH/C catalysts, that prepared with cobalt acetate exhibits the best ORR performance. The crystallite/particle size of cobalt and its distribution as well as the graphitization degree of carbon in the catalyst greatly affects the catalytic performance of Co-PPy-TsOH/C towards ORR. Metallic cobalt is the main component in the active site in Co-PPy-TsOH/C for catalyzing ORR, but some other elements such as nitrogen are probably involved, too.

Novel Flower-like Nickel Sulfide as an Efficient Electrocatalyst for Non-aqueous Lithium-Air Batteries

In this paper, metal sulfide materials have been explored for the first time as a new choice of bifunctional cathode electrocatalyst materials for non-aqueous lithium-air batteries (LABs). Nickel sulfides with two different morphologies of flower-like (f-NiS) and rod-like (r-NiS) are successfully synthesized using a hydrothermal method with and without the assistance of cetyltrimethyl ammonium bromide. As LAB cathode catalysts, both f-NiS and r-NiS demonstrate excellent catalytic activities towards the formation and decomposition of Li2O2, resulting in improved specific capacity, reduced overpotentials and enhanced cycling performance when compared to those of pure Super P based electrode. Moreover, the morphology of NiS materials can greatly affect LAB performance. Particularly, the f-NiS is more favorable than r-NiS in terms of their application in LABs. When compared to both r-NiS and pure super P materials as LAB cathode materials, this f-NiS catalyst material can give the highest capacity of 6733 mA h g−1 and the lowest charge voltage of 4.24 V at the current density of 75 mA g−1 and also exhibit an quite stable cycling performance.

Novel nanowire-structured polypyrrole-cobalt composite as efficient catalyst for oxygen reduction reaction

A novel nanowire-structured polypyrrole-cobalt composite, PPy-CTAB-Co, is successfully synthesized with a surfactant of cetyltrimethylammounium bromide (CTAB). As an electro-catalyst towards oxygen reduction reaction (ORR) in alkaline media, this PPy-CTAB-Co demonstrates a superior ORR performance when compared to that of granular PPy-Co catalyst and also a much better durability than the commercial 20 wt% Pt/C catalyst. Physiochemical characterization indicates that the enhanced ORR performance of the nanowire PPy-CTAB-Co can be attributed to the high quantity of Co-pyridinic-N groups as ORR active sites and its large specific surface area which allows to expose more active sites for facilitating oxygen reduction reaction. It is expected this PPy-CTAB-Co would be a good candidate for alkaline fuel cell cathode catalyst.

A SnO2-Based Cathode Catalyst for Lithium-Air Batteries

SnO2 and SnO2@C have been successfully synthesized with a simple hydrothermal procedure combined with heat treatment, and their performance as cathode catalysts of Li-air batteries has been comparatively evaluated and discussed. The results show that both SnO2 and SnO2@C are capable of catalyzing oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) at the cathode of Li-air batteries, but the battery with SnO2@C displays better performance due to its unique higher conductivity, larger surface area, complex pore distribution, and huge internal space.