Xiao-Sheng Zhang

Frequency-Multiplication High-Output Triboelectric Nanogenerator for Sustainably Powering Biomedical Microsystems

An attractive method to response the current energy crisis and produce sustainable nonpolluting power source is harvesting energy from our living environment. However, the energy in our living environment always exists in low-frequency form, which is very difficult to be utilized directly. Here, we demonstrated a novel sandwich-shape triboelectric nanogenerator to convert low-frequency mechanical energy to electric energy with double frequency. An aluminum film was placed between two polydimethylsiloxane (PDMS) membranes to realize frequency multiplication by twice contact electrifications within one cycle of external force. The working mechanism was studied by finite element simulation. Additionally, the well-designed micro/nano dual-scale structures (i.e., pyramids and V-shape grooves) fabricated atop PDMS surface was employed to enhance the device performance. The output peak voltage, current density, and energy volume density achieved 465 V, 13.4 μA/cm(2), and 53.4 mW/cm(3), respectively. This novel nanogenerator was systematically investigated and also demonstrated as a reliable power source, which can be directly used to not only lighten five commercial light-emitting diodes (LEDs) but also drive an implantable 3-D microelectrode array for neural prosthesis without any energy storage unit or rectification circuit. This is the first demonstration of the nanogenerator for directly driving biomedical microsystems, which extends the application fields of the nanogenerator and drives it closer to practical applications.

A transparent single-friction-surface triboelectric generator and self-powered touch sensor

We present a single-friction-surface triboelectric generator (STEG). The STEG is transparent and flexible, making possible the use of triboelectric generators in an extended range of applications. This device is fabricated in a simple and very low-cost way. When tapped with a finger, the STEG with micro-patterned PDMS surface achieved an open-circuit voltage over 130 V with a short-circuit current density of about 1 μA cm−2. A STEG with a flat PET surface is employed as a transparent cover on the screen of a smartphone to generate electric energy from the control motion of the users. The STEG can directly power 3 LEDs when the phone screen is tapped during normal use. In addition, based on the STEG, we have developed a self-powered visualized touch sensor with 4 STEGs serving as the touch pads. The STEG shows promise for applications in systems such as self-powered touch panels and artificial skins.

r-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity

Piezoelectric and triboelectric nanogenerators (NGs) have been proposed in the past few years to effectively harvest mechanical energy from the environment. Here, a polydimethylsiloxane (PDMS) layer is placed under the aluminum electrode of polyvinylidene fluoride (PVDF), thus forming an r-shaped hybrid NG. Micro/nanostructures have been fabricated on the PDMS surface and the aluminum electrodes of PVDF to enhance the output performance. Power densities of the piezoelectric part and the triboelectric part are 10.95 and 2.04 mW/cm(3), respectively. Moreover, influence of the triboelectric charges on the piezoelectric output voltage is investigated. Both finite element method simulations and experimental measurements are conducted to verify this phenomenon. The novel hybrid NG is also demonstrated as a power source for consumer electronics. Through one cycle of electric generation, 10 light-emitting diodes are lighted up instantaneously, and a 4-bit liquid crystal display can display continuously for more than 15 s. Besides, the device is integrated into a keyboard to harvest energy in the typing process.

Magnetic-assisted triboelectric nanogenerators as self-powered visualized omnidirectional tilt sensing system

The triboelectric nanogenerator (TENG) is a promising device in energy harvesting and self-powered sensing. In this work, we demonstrate a magnetic-assisted TENG, utilizing the magnetic force for electric generation. Maximum power density of 541.1 mW/m2 is obtained at 16.67 MΩ for the triboelectric part, while the electromagnetic part can provide power density of 649.4 mW/m2 at 16 Ω. Through theoretical calculation and experimental measurement, linear relationship between the tilt angle and output voltage at large angles is observed. On this basis, a self-powered omnidirectional tilt sensor is realized by two magnetic-assisted TENGs, which can measure the magnitude and direction of the tilt angle at the same time. For visualized sensing of the tilt angle, a sensing system is established, which is portable, intuitive, and self-powered. This visualized system greatly simplifies the measure process, and promotes the development of self-powered systems.

Self-Cleaning Poly(dimethylsiloxane) Film with Functional Micro/Nano Hierarchical Structures

This paper reports a novel single-step wafer-level fabrication of superhydrophobic micro/nano dual-scale (MNDS) poly(dimethylsiloxane) (PDMS) films. The MNDS PDMS films were replicated directly from an ultralow-surface-energy silicon substrate at high temperature without any surfactant coating, achieving high precision. An improved deep reactive ion etching (DRIE) process with enhanced passivation steps was proposed to easily realize the ultralow-surface-energy MNDS silicon substrate and also utilized as a post-treatment process to strengthen the hydrophobicity of the MNDS PDMS film. The chemical modification of this enhanced passivation step to the surface energy has been studied by density functional theory, which is also the first investigation of C4F8 plasma treatment at molecular level by using first-principle calculations. From the results of a systematic study on the effect of key process parameters (i.e., baking temperature and time) on PDMS replication, insight into the interaction of hierarchical multiscale structures of polymeric materials during the micro/nano integrated fabrication process is experimentally obtained for the first time. Finite element simulation has been employed to illustrate this new phenomenon. Additionally, hierarchical PDMS pyramid arrays and V-shaped grooves have been developed and are intended for applications as functional structures for a light-absorption coating layer and directional transport of liquid droplets, respectively. This stable, self-cleaning PDMS film with functional micro/nano hierarchical structures, which is fabricated through a wafer-level single-step fabrication process using a reusable silicon mold, shows attractive potential for future applications in micro/nanodevices, especially in micro/nanofluidics.

Single-friction-surface triboelectric generator with human body conduit

We present a transparent single-friction-surface triboelectric generator (STEG) employing human body as the conduit, making the applications of STEG in portable electronics much more practical and leading to a significant output improvement. The STEG with micro-patterned polydimethylsiloxane surface achieved an output voltage of over 200 V with a current density of 4.7 μA/cm2. With human body conduit, the output current increased by 39% and the amount of charge that transferred increased by 34% compared to the results with grounded electrode. A larger increment of 210% and 81% was obtained in the case of STEG with a large-size flat polyethylene terephthalate surface.

Note: A cubic electromagnetic harvester that convert vibration energy from all directions.

We investigate the output performance of a cubic harvester which can scavenge low-frequency vibration energy from all directions. By adjusting the size and shape of the inside magnets, higher induced voltages and output power can be achieved. The optimal magnet is found to be cubic shape with the length of 6.35 mm (25.6% volume ratio), which can generate 4.27 mV root mean square voltage and 2.45 μW average power at the frequency of 28.86 Hz and acceleration of 1.17 g. The device is also demonstrated as a self-powered tilt sensor by measuring induced voltages at different tilt angles.

3D nanostructure reconstruction based on the SEM imaging principle, and applications

This paper addresses a novel 3D reconstruction method for nanostructures based on the scanning electron microscopy (SEM) imaging principle. In this method, the shape from shading (SFS) technique is employed, to analyze the gray-scale information of a single top-view SEM image which contains all the visible surface information, and finally to reconstruct the 3D surface morphology. It offers not only unobstructed observation from various angles but also the exact physical dimensions of nanostructures. A convenient and commercially available tool (NanoViewer) is developed based on this method for nanostructure analysis and characterization of properties. The reconstruction result coincides well with the SEM nanostructure image and is verified in different ways. With the extracted structure information, subsequent research of the nanostructure can be carried out, such as roughness analysis, optimizing properties by structure improvement and performance simulation with a reconstruction model. Efficient, practical and non-destructive, the method will become a powerful tool for nanostructure surface observation and characterization.

Springless cubic harvester for converting three dimensional vibration energy

This paper reports the design, fabrication and measurement of a springless cubic energy harvester. Based on the flexible printed circuits, coils are fabricated onto both sides of the polyimide substrate and then folded to a cubic box, meanwhile sealed a free magnet inside the box. As the coils are folded on three different directions, vibration in all dimensions can cause the change of magnetic flux and the energy is effectively harvested. Output performance of the device is both theoretically and experimentally investigated. Benefit from the springless structure, maximum output is achieved at low frequencies with a wide bandwidth. Moreover, the device can be placed on a backpack or wrist to harvest vibration energy from daily life.

Gold nanoparticle-coated silicon cone array for surface-enhanced Raman spectroscopy

ABSTRACT We demonstrate a silicon cone array substrate coated with gold nanoparticles and which was highly sensitive, homogeneous, and provided a large area for surface-enhanced Raman spectroscopy (SERS). A deep reactive ion-etching process was used to fabricate the high-density silicon cone array, and gold nanoparticles were formed on the silicon cone surface by magnetron sputtering. The substrate was tested with 10−6 M rhodamine 6 G solution. Enhancement of the substrate was about 60-fold greater than that of flat substrate. Moreover, SERS signals obtained from 24 random areas on the substrate showed good homogeneity with an average standard deviation of 3.9%.