Xiao-Yu Yang

Dual Förster resonance energy transfer effects in non-fullerene ternary organic solar cells with the third component embedded in the donor and acceptor

Non-fullerene ternary organic solar cells (OSCs) are new promising candidates for future applications in the area of organic photovoltaics. However, their low short-circuit current (JSC) values impede efforts at increasing their power conversion efficiency (PCE) levels. Maximizing the JSC is one of the critical elements for enabling high performances of OSCs. To improve the JSC of the non-fullerene ternary OSCs based on poly[[2,6′-4,8-di(5-ethylhexylthienyl)benzo[1,2-b:3,3-b]dithiophene][3-fluoro-2[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]:3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]-dithiophene (PTB7-Th:ITIC), a polymer of poly[N-9′′-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) was added to the binary system. The PCDTBT was shown to embed in both PTB7-Th and ITIC, and introduced dual Forster resonance energy transfer (FRET) effects in the resulting ternary system. In addition, the PCDTBT may have decreased the molecular coherence lengths of PTB7-Th and ITIC and influenced the charge transport. Furthermore, the PCDTBT apparently also decreased the d-spacing of the π–π stacking of PTB7-Th and ITIC, which likely increased the intermolecular charge hopping efficiency. Doping an appropriate amount of PCDTBT in the system yielded an increase in the JSC from 13.89 to 16.71 mA cm−2. The increased JSC resulted in a 15% enhancement of the PCE, which indicated that introducing dual FRET effects is an effective way to enhance the JSC and thus the performance of the OSCs.

Preparation and photovoltaic properties of CdS quantum dot-sensitized solar cell based on zinc tin mixed metal oxides

The present study reports a new type of quantum dot sensitized solar cells (QDSSCs) using the zinc tin mixed metal oxides (MMO) as the anode materials, which were obtained from the layered double hydroxide (LDH) precursor. The successive ionic layer adsorption and reaction (SILAR) method is applied to deposit CdS quantum dots. The effects of sensitizing cycles on the performance of CdS QDSSC are studied. Scanning electron microscopy (SEM), Transmission electron microscope (TEM) and X-ray diffraction (XRD) are used to identify the surface profile and crystal structure of the mixed metal oxides anode. The photovoltaic performance of the QDSSC is studied by the electrochemical method. The new CdS QDSSC exhibits power conversion efficiency (PCE) up to 0.48% when the anode was sensitized for eight cycles.

Improving the Compatibility of Donor Polymers in Efficient Ternary Organic Solar Cells via Post-Additive Soaking Treatment

In dual-donor ternary organic solar cells, the compatibility between the donor polymers plays important roles to control the conformational change and govern the photophysical behavior in the blend films. Here, we apply a post-additive soaking (PAS) approach to reconstruct the morphology in a ternary organic photovoltaic BHJ of PTB7-Th: PCDTBT: PC71BM. The PAS-treated device has a maximum power conversion efficiency (PCE) of about 8.7% in this ternary system. From the analyses of GIWAXS and GISAXS, the superior device performance is attributed to the favorable nanomorphology with optimum crystallinity of PTB7-Th and good intermixing of PCDTBT with PTB7-Th:PC71BM, leading to improved charge transport in the vertical direction. AFM and TRPL measurements clearly demonstrate PAS-treated film envisages a homogeneous distribution of smaller PC71BM aggregates to facilitate the exciton dissociation and carrier extraction at the interface. The increased PCE ascribed to not only the enhancement of absorption and nonradiative Förster resonance energy transfer (FRET) between two donors (PCDTBT and PTB7-Th) but also the formation of a bicontinuous interpenetrating network of PC71BM.

Structural and optical properties of conjugated polymer and carbon-based non-fullerene material blend films for photovoltaic applications

In this work, the structural and optical properties of bulk heterojunctions (BHJ) composed of MEH-PPV and carbon-based non-fullerene nanodiamond (ND) have been investigated. The steady-state absorption, temperature-dependent fluorescence and Raman spectroscopy demonstrate the conjugated length is increased and more ordered crystalline domains are formed in MEH-PPV films with the increment of ND content. The time-resolved fluorescence spectroscopy and 2D microscopy indicate that the BHJs with higher concentrations of ND may enhance the donor/acceptor interfacial contact which favors the dissociation of excitons into free charge carriers. Solar cells based on MEH-PPV:ND BHJs were fabricated to explore the interplay between structural, photophysical properties, and ultimately, device performances. The results show that optimization of blend composition and structures with ND may improve the efficiency of the thin film photovoltaic devices.

Impact of solvent additive on exciton dissociation in P3HT : EP-PDI blend film via controlling morphology

Suitable solvent additives provide an effective means to control the morphology of polymer blend films. In this work, we systematically investigate the impact of the solvent additive chloronaphthalene (CN) on the morphology of P3HT : EP-PDI blends. The optimum volume fraction of solvent additive CN was found to be 0.5 vol% by atom force microscopy and transmission electron microscopy. UV–visible absorption spectroscopy and grazing incidence x-ray diffraction indicate that the crystallinity of both the P3HT and EP-PDI domains significantly decreased in the blends with 0.5 vol% CN. Grazing incidence small-angle x-ray scattering results show that the size of the small EP-PDI aggregation decreases from 44–22 nm with the addition of CN. Time-resolved photoluminescence measurement reveals that the decreased EP-PDI domains give rise to increased donor–acceptor interfacial areas, which not only facilitate the exciton dissociation, but suppresses the formation of the EP-PDI intermolecular state.

Improved compatibility of DDAB-functionalized graphene oxide with a conjugated polymer by isocyanate treatment

2-Chlorophenyl isocyanate (CI) reacts with didodecyl dimethyl ammonium bromide (DDAB) functionalized graphene oxide (DDAB-GO) dispersed in ortho-dichlorobenzene under mild conditions. The CI treatment complements DDAB functionalization to further decrease the hydrophilicity of pristine GO sheets. The resulting CI–DDAB-GO exhibits improved compatibility with the conjugated polymer poly(3-hexylthiophene) (P3HT), compared to DDAB-GO. CI–DDAB-GO sheets can be homogeneously dispersed when blended with P3HT, resulting in an improved morphology compared to P3HT:DDAB-GO composites. The incorporation of CI–DDAB-GO can effectively reduce the dark current of photo-diodes based on P3HT composites, showing potential to enhance the performance of electronic devices based on conjugated polymer composites.