Xiaohan Ren

Numerical and experimental studies on effects of moisture content on combustion characteristics of simulated municipal solid wastes in a fixed bed

In order to reveal the features of the combustion process in the porous bed of a waste incinerator, a two-dimensional unsteady state model and experimental study were employed to investigate the combustion process in a fixed bed of municipal solid waste (MSW) on the combustion process in a fixed bed reactor. Conservation equations of the waste bed were implemented to describe the incineration process. The gas phase turbulence was modeled using the k-ε turbulent model and the particle phase was modeled using the kinetic theory of granular flow. The rate of moisture evaporation, devolatilization rate, and char burnout was calculated according to the waste property characters. The simulation results were then compared with experimental data for different moisture content of MSW, which shows that the incineration process of waste in the fixed bed is reasonably simulated. The simulation results of solid temperature, gas species and process rate in the bed are accordant with experimental data. Due to the high moisture content of fuel, moisture evaporation consumes a vast amount of heat, and the evaporation takes up most of the combustion time (about 2/3 of the whole combustion process). The whole bed combustion process reduces greatly as MSW moisture content increases. The experimental and simulation results provide direction for design and optimization of the fixed bed of MSW.

Numerical simulation of gas concentration and dioxin formation for MSW combustion in a fixed bed

A numerical model was employed to simulate the combustion process in a fixed porous bed of municipal solid waste (MSW). Mass, momentum, energy and species conservation equations of the waste bed were set up to describe the incineration process. The rate of moisture evaporation, volatile matter devolatilization, char combustion, NOx production, and reduction and dioxin formation were calculated and established according to the local thermal conditions and waste property characteristics. Changes in the bed volume during incineration were calculated according to the reaction rate of the process. The simulation results were compared with experimental data, which shows that the incineration process of waste in the fixed bed was reasonably simulated. The simulation results of weight loss and solid temperature in the bed agree with the experimental data, which shows that the waste combustion rate is nearly constant in the middle of the incineration process, and that moisture evaporation takes up most of the time for the overall incineration experiment. The emission of gas species from the bed surface is also agreeably simulated, with O2, CO2, and CO concentrations in flue gas agreeing with the experimental data. The simulation results benefit the understanding of the combustion process in the waste bed as well as the design of incinerator grates.

Influence of simulated MSW sizes on the combustion process in a fixed bed: CFD and experimental approaches

This work presents the effect of the simulated sizes of Municipal Solid Waste (MSW) on the combustion process in a fixed bed experimentally and numerically. The effect of temperature, gas emissions, flame front velocity and process rate are discussed for three different sizes of MSW: 10, 30, and 50 mm. The study found that for the operating conditions of the current model, when the diameter of particles is decreased, the bulk density of the material is increased, resulting in a decrease of convective heat transfer as well as combustion speed. As the diameter size of the material particles increase, the height of the post-combustion zone is increased, while the temperature in a high temperature area is decreased, due to the decrease in the materials bulk density and the excessive increase in porosity. Results also show that the average emission concentration of CO and CO2 decreases gradually with an increase in the particle diameter size.