Xiaojie Lin

Achieving Ultralow Fouling under Ambient Conditions via Surface-Initiated ARGET ATRP of Carboxybetaine

We achieved ultralow fouling on target surfaces by controlled polymerization of carboxybetaine under ambient conditions. The polymerization process for grafting polymer films onto the surfaces was carried out in air and did not require any deoxygenation step or specialized equipment. This method allows one to conveniently introduce a nonfouling polymer network onto large substrates.

Zwitterionic Nanocages Overcome the Efficacy Loss of Biologic Drugs

For biotherapeutics that require multiple administrations to fully cure diseases, the induction of undesirable immune response is one common cause for the failure of their treatment. Covalent binding of hydrophilic polymers to proteins is commonly employed to mitigate potential immune responses. However, while this technique is proved to partially reduce the antibodies (Abs) reactive to proteins, it may induce Abs toward their associated polymers and thus result in the loss of efficacy. Zwitterionic poly(carboxybetaine) (PCB) is recently shown to improve the immunologic properties of proteins without inducing any antipolymer Abs against itself. However, it is unclear if the improved immunologic profiles can translate to better clinical outcomes since improved immunogenicity cannot directly reflect amelioration in efficacy. Here, a PCB nanocage (PCB NC) is developed, which can physically encase proteins while keeping their structure intact. PCB NC encapsulation of uricase, a highly immunogenic enzyme, is demonstrated to eradicate all the immune responses. To bridge the gap between immunogenicity and efficacy studies, the therapeutic performance of PCB NC uricase is evaluated and compared with its PEGylated counterpart in a clinical-mimicking gouty rat model to determine any loss of efficacy evoked after five administrations.

A Coating-Free Nonfouling Polymeric Elastomer

Medical devices face nonspecific biofouling from proteins, cells, and microorganisms, which significantly contributes to complications and device failure. Imparting these devices with nonfouling capabilities remains a major challenge, particularly for those made from elastomeric polymers. Current strategies, including surface coating and copolymerization/physical blending, necessitate compromise among nonfouling properties, durability, and mechanical strength. Here, a new strategy is reported to achieve both high bulk mechanical strength and excellent surface nonfouling properties, which are typically contradictory, in one material. This is realized through a nonfouling polymeric elastomer based on zwitterionic polycarboxybetaine derivatives. By hiding both charged moieties of the zwitterionic compounds with hydrocarbon ester and tertiary amine groups, the bulk polymer itself is elastomeric and hydrophobic while its superhydrophilic surface properties are restored upon hydrolysis. This coating-free nonfouling elastomer is a highly promising biomaterial for biomedical and engineering applications.

Zwitterionic Hydrogels Based on a Degradable Disulfide Carboxybetaine Cross-Linker

We report the synthesis of a zwitterionic carboxybetaine disulfide cross-linker (CBX-SS) and biodegradable poly(carboxybetaine) (PCB) hydrogels and nanocages (NCs) made using this cross-linker. The structure of CBX-SS combines zwitterionic carboxybetaine to confer nonfouling properties and a disulfide linkage to facilitate degradation. The physical, mechanical, and fouling characteristics of PCB hydrogels cross-linked with CBX-SS were investigated. Then, the degradation characteristics of CBX-SS-cross-linked hydrogels were evaluated through their weight loss and release of an encapsulated protein in a reducing environment. Furthermore, CBX-SS was applied to prepare degradable PCB NCs. Results show that encapsulating the highly immunogenic enzyme uricase in degradable PCB NCs eliminates or prevents an in vivo immune response to both the protein and polymer.

Ultra-low Fouling and Functionalizable Surface Chemistry Based on Zwitterionic Carboxybetaine Random Copolymers

Here, we report a simple yet effective surface-modification approach to imparting hydrophobic surfaces with superhydrophilicity using ultralow fouling/functionalizable carboxybetaine (CB) copolymers via a dip-coating technique. A new series of CB random copolymers with varying amphiphilicities were synthesized and coated on hydrophobic polypropylene (PP) and polystyrene (PS) surfaces. The nonfouling capability of each coating was screened by an enzyme-linked immunosorbent assay (ELISA) and further comprehensively assessed against 100% human serum by a Micro BCA protein assay kit. The random copolymer containing ∼30 mol % CB units showed superhydrophilicity with the highest air contact angle of more than 165° in DI water and the best nonfouling capability against 100% human blood serum. Surfaces of a 96-well plate coated with the optimal CB random copolymer had a significantly better nonfouling capability than those of a commercial 96-well plate with an ultralow attachment surface. The adhesion of mouse embryonic fibroblast cells (NIH3T3) was completely inhibited on surfaces coated with CB random copolymers. Furthermore, the optimal nonfouling CB copolymer surface was functionalized with an antigen via covalent bonding where its specific interactions with its antibody were verified. Thus, this CB random copolymer is capable of imparting both ultralow fouling and functionalizable capabilities to hydrophobic surfaces for blood-contacting devices.

Poly(ectoine) Hydrogels Resist Nonspecific Protein Adsorption

The development of nonfouling zwitterionic materials has a wide range of biomedical and engineering applications. This work delineates the design and synthesis of a new zwitterionic material based on a naturally occurring compatible solute, ectoine, which is known to possess additional protective properties that stabilize even whole cells against ultraviolet radiation or cytotoxins. These properties and applications of ectoine inspire us to design a functional monomer containing the natural zwitterion moiety of ectoine imparting nonfouling properties and the methacrylate moiety for polymerization. The synthesis route designed for the ectoine methacrylate monomer is simple with a high yield, which is characterized by nuclear magnetic resonance spectroscopy and mass spectrometry. After monomer synthesis, we have prepared a poly(ectoine) hydrogel via thermal polymerization. The equilibrium water content, degree of cross-linking, mechanical strength, and nonfouling properties are determined for polyectoine hydrogels with different cross-linking conditions. Poly(ectoine) hydrogels are shown to have highly hydrated and excellent nonfouling properties and can be considered to be a promising biomaterial.