Xiaonan Lu

Determination of total phenolic content and antioxidant capacity of onion (Allium cepa) and shallot (Allium oschaninii) using infrared spectroscopy

Total phenolic content (TPC) and total antioxidant capacity (TAC) of four onion varieties (red, white, yellow and sweet) and shallot from selected locations (Washington, Idaho, Oregon, Texas and Georgia) were determined using Fourier transform infrared (FT-IR) spectroscopy (4000-400cm-1). The Folin-Ciocalteu (F-C) assay was used to quantify TPC and three assays were used to determine TAC, including 2,2-diphenyl-picrylhydrazyl (DPPH) assay, Trolox equivalent antioxidant capacity (TEAC) assay and ferric reducing antioxidant power (FRAP) assay. Partial least squares regression (PLSR) with cross-validation (leave-one-out) was conducted on onion and shallot extracts (n=200) and their corresponding F-C, DPPH, TEAC and FRAP values were employed to obtain four independent calibration models for predicting TPC and TAC for the extracts. Spectra from an extra 19 independent extracts were used as an external validation set for prediction. A correlation of r>0.95 was obtained between FT-IR predicted and reference values (by F-C, DPPH, TEAC and FRAP assay) with standard errors of calibration (SEC) and standard errors of cross-validation (SECV) less than 2.85, 0.35 and 0.45μmolTrolox/g FW of extracts for TEAC, FRAP and DPPH assay, respectively; and 0.36mggallic acid/g FW of extracts for the F-C assay. In addition, cluster analysis (principal component analysis (PCA)) and discriminant function analysis (DFA) could differentiate varieties of onions and shallot based upon infrared spectral features. Loading plots for the various chemometrics models indicated that hydroxyl and phenolic functional groups were most closely correlated with antioxidant capacity. The use of mid-infrared spectroscopy to predict the total antioxidant capacity of vegetables provides a rapid and precise alternative to traditional wet chemistry analysis.

Production of Organic Acids by Probiotic Lactobacilli Can Be Used to Reduce Pathogen Load in Poultry

Probiotic Lactobacillus can be used to reduce the colonization of pathogenic bacteria in food animals, and therefore reduce the risk of foodborne illness to consumers. As a model system, we examined the mechanism of protection conferred by Lactobacillus species to inhibit C. jejuni growth in vitro and reduce colonization in broiler chickens. Possible mechanisms for the reduction of pathogens by lactobacilli include: 1) stimulation of adaptive immunity; 2) alteration of the cecal microbiome; and, 3) production of inhibitory metabolites, such as organic acids. The Lactobacillus species produced lactic acid at concentrations sufficient to kill C. jejuni in vitro. We determined that lactic acid produced by Lactobacillus disrupted the membrane of C. jejuni, as judged by biophotonics. The spectral features obtained using Fourier-transform infrared (FT-IR) and Raman spectroscopy techniques were used to accurately predict bacterial viability and differentiate C. jejuni samples according to lactic acid treatment. FT-IR spectral features of C. jejuni and Lactobacillus grown in co-culture revealed that the metabolism was dominated by Lactobacillus prior to the killing of C. jejuni. Based on our results, the development of future competitive exclusion strategies should include the evaluation of organic acid production.

Determination of antioxidant content and antioxidant activity in foods using infrared spectroscopy and chemometrics: a review.

Developing rapid analytical methods for bioactive components and predicting both the concentration and biological availability of nutraceutical components in foods is a topic of growing interest. Here, analysis of bioactive components and total antioxidant activity in food matrices using infrared spectroscopy coupled with chemometric predictive models is described. Infrared spectroscopy offers an alternative to wet chemistry, chromatographic determination of antioxidants, and in vitro biochemical assays for assessment of antioxidant activity. Spectroscopic methods provide a technique that can be used with biological tissues without extraction, which can often lead to degradation of the antioxidant components. Sample preparation time greatly decreases and analysis time is very short once a predictive model has been developed. Spectroscopic methods can have a high degree of precision when applied to analysis of nutraceutical compound concentration and antioxidant activity in foods. This article summarizes recent advances in vibrational spectroscopy and chemometrics and applications of these methods for antioxidant detection in foods.

Investigating Antibacterial Effects of Garlic (Allium sativum) Concentrate and Garlic-Derived Organosulfur Compounds on Campylobacter jejuni by Using Fourier Transform Infrared Spectroscopy, Raman Spectroscopy, and Electron Microscopy

ABSTRACT Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy were used to study the cell injury and inactivation of Campylobacter jejuni from exposure to antioxidants from garlic. C. jejuni was treated with various concentrations of garlic concentrate and garlic-derived organosulfur compounds in growth media and saline at 4, 22, and 35°C. The antimicrobial activities of the diallyl sulfides increased with the number of sulfur atoms (diallyl sulfide < diallyl disulfide < diallyl trisulfide). FT-IR spectroscopy confirmed that organosulfur compounds are responsible for the substantial antimicrobial activity of garlic, much greater than those of garlic phenolic compounds, as indicated by changes in the spectral features of proteins, lipids, and polysaccharides in the bacterial cell membranes. Confocal Raman microscopy (532-nm-gold-particle substrate) and Raman mapping of a single bacterium confirmed the intracellular uptake of sulfur and phenolic components. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed to verify cell damage. Principal-component analysis (PCA), discriminant function analysis (DFA), and soft independent modeling of class analogs (SIMCA) were performed, and results were cross validated to differentiate bacteria based upon the degree of cell injury. Partial least-squares regression (PLSR) was employed to quantify and predict actual numbers of healthy and injured bacterial cells remaining following treatment. PLSR-based loading plots were investigated to further verify the changes in the cell membrane of C. jejuni treated with organosulfur compounds. We demonstrated that bacterial injury and inactivation could be accurately investigated by complementary infrared and Raman spectroscopies using a chemical-based, “whole-organism fingerprint” with the aid of chemometrics and electron microscopy.

Detection of heavy metal by paper-based microfluidics

Heavy metal pollution has shown great threat to the environment and public health worldwide. Current methods for the detection of heavy metals require expensive instrumentation and laborious operation, which can only be accomplished in centralized laboratories. Various microfluidic paper-based analytical devices have been developed recently as simple, cheap and disposable alternatives to conventional ones for on-site detection of heavy metals. In this review, we first summarize current development of paper-based analytical devices and discuss the selection of paper substrates, methods of device fabrication, and relevant theories in these devices. We then compare and categorize recent reports on detection of heavy metals using paper-based microfluidic devices on the basis of various detection mechanisms, such as colorimetric, fluorescent, and electrochemical methods. To finalize, the future development and trend in this field are discussed.

Unraveling a three-step spatiotemporal mechanism of triggering of receptor-induced Nipah virus fusion and cell entry.

Membrane fusion is essential for entry of the biomedically-important paramyxoviruses into their host cells (viral-cell fusion), and for syncytia formation (cell-cell fusion), often induced by paramyxoviral infections [e.g. those of the deadly Nipah virus (NiV)]. For most paramyxoviruses, membrane fusion requires two viral glycoproteins. Upon receptor binding, the attachment glycoprotein (HN/H/G) triggers the fusion glycoprotein (F) to undergo conformational changes that merge viral and/or cell membranes. However, a significant knowledge gap remains on how HN/H/G couples cell receptor binding to F-triggering. Via interdisciplinary approaches we report the first comprehensive mechanism of NiV membrane fusion triggering, involving three spatiotemporally sequential cell receptor-induced conformational steps in NiV-G: two in the head and one in the stalk. Interestingly, a headless NiV-G mutant was able to trigger NiV-F, and the two head conformational steps were required for the exposure of the stalk domain. Moreover, the headless NiV-G prematurely triggered NiV-F on virions, indicating that the NiV-G head prevents premature triggering of NiV-F on virions by concealing a F-triggering stalk domain until the correct time and place: receptor-binding. Based on these and recent paramyxovirus findings, we present a comprehensive and fundamentally conserved mechanistic model of paramyxovirus membrane fusion triggering and cell entry.

Determination of Sudan I in paprika powder by molecularly imprinted polymers–thin layer chromatography–surface enhanced Raman spectroscopic biosensor

Sudan I is a carcinogenic and mutagenic azo-compound that has been utilized as a common adulterant in spice and spice blends to impart a desirable red color to foods. A novel biosensor combining molecularly imprinted polymers (MIPs), thin layer chromatography (TLC) and surface enhanced Raman spectroscopy (SERS) could determine Sudan I levels in paprika powder to 1 ppm (or 2 ng/spot). Sudan I spiked paprika extracts (spiking levels: 0, 1, 5, 10, 40, 70 and 100 ppm) were prepared. Sudan I imprinted polymers were synthesized by employing the interaction between Sudan I (template) and methacrylic acid (functional monomer), followed by washing to remove Sudan I leaving the Sudan I-binding sites exposed. MIPs were used as a stationary phase for TLC and could selectively retain Sudan I at the original spot with little interference. A gold colloid SERS substrate could enhance Raman intensity for Sudan I in this MIP-TLC system. Principal component analysis plot and partial least squares regression (R(2)=0.978) models were constructed and a linear regression model (R(2)=0.983) correlated spiking levels (5, 10, 40, 70 and 100 ppm) with the peak intensities (721 cm(-1)) of Sudan I SERS spectra. Both separation (30-40s) and detection (1s or 0.1s) were extremely fast by using both commercial bench-top and custom made portable Raman spectrometers. This biosensor can be applied as a rapid, low-cost and reliable tool for screening Sudan I adulteration in foods.

Determination of Total Phenolic Content and Antioxidant Activity of Garlic (Allium sativum) and Elephant Garlic (Allium ampeloprasum) by Attenuated Total Reflectance–Fourier Transformed Infrared Spectroscopy

The total phenolic contents and antioxidant activities of garlics from California, Oregon, Washington, and New York were determined by Fourier transform infrared (FT-IR) spectroscopy (400-4000 cm(-1)). The total phenolic content was quantified [Folin-Ciocalteu assay (FC)] and three antioxidant activity assays, 2,2-diphenyl-picrylhydrazyl (DPPH) assay, Trolox equivalent antioxidant capacity (TEAC) assay, and ferric reducing antioxidant power (FRAP), were employed for reference measurements. Four independent partial least-squares regression (PLSR) models were constructed with spectra from 25 extracts and their corresponding FC, DPPH, TEAC, and FRAP with values for 20 additional extracts predicted (R > 0.95). The standard errors of calibration and standard error of cross-validation were <1.45 (TEAC), 0.36 (FRAP), and 0.33 μmol Trolox/g FW (DPPH) and 0.55 mg gallic acid/g FW (FC). Cluster and dendrogram analyses could segregate garlic grown at different locations. Hydroxyl and phenolic functional groups most closely correlated with garlic antioxidant activity.

Using of infrared spectroscopy to study the survival and injury of Escherichia coli O157:H7, Campylobacter jejuni and Pseudomonas aeruginosa under cold stress in low nutrient media

The inactivation and sublethal injury of Escherichia coli O157:H7, Campylobacter jejuni and Pseudomonas aeruginosa at three temperatures (22 °C, 4 °C and -18 °C) were studied using traditional microbiological tests and mid-infrared spectroscopy (4000-400 cm(-1)). Bacteria were cultivated in diluted nutrient matrices with a high initial inoculation (∼10(7) CFU/ml) levels. Both E. coli O157:H7 and P. aeruginosa survived and cell numbers increased at 22 °C for 5 days while C. jejuni numbers decreased one log(10) CFU/ml. A two log CFU/ml decrease was observed for the three pathogens held at 4 °C for 12 days. C. jejuni survived poorly following incubation at -18 °C for 20 days while levels of E. coli O157:H7 and P. aeruginosa remained high (10(4) CFU/ml). Temperature stress response of microbes was observed by infrared spectroscopy in polysaccharide, protein, lipid, and nucleic acid regions and was strain specific. Level of cold injury could be predicted using cluster, discriminant function and class analog analysis models. Pathogens may produce oligosaccharides and potentially other components in response to stress as indicated by changes in spectral features at 1200-900 cm(-1) following freezing.

Recent Advancements in Functionalized Paper-Based Electronics

Building electronic devices on ubiquitous paper substrates has recently drawn extensive attention due to its light weight, low cost, environmental friendliness, and ease of fabrication. Recently, a myriad of advancements have been made to improve the performance of paper electronics for various applications, such as basic electronic components, energy storage devices, generators, antennas, and electronic circuits. This review aims to summarize this progress and discuss different perspectives of paper electronics as well as the remaining challenges yet to be overcome in this field. Other aspects included in this review are the fundamental characteristics of paper, modification of paper with functional materials, and various methods for device fabrication.