Xiaoyan Du

A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells

Minimizing losses at interfaces Among the issues facing the practical use of hybrid organohalide lead perovskite solar cells is the loss of charge carriers at interfaces. Hou et al. show that tantalum-doped tungsten oxide forms almost ohmic contacts with inexpensive conjugated polymer multilayers to create a hole-transporting material with a small interface barrier. This approach eliminates the use of ionic dopants that compromise device stability. Solar cells made with these contacts achieved maximum efficiencies of 21.2% and operated stably for more than 1000 hours. Science, this issue p. 1192 Tantalum-doped tungsten oxide forms nearly ohmic contacts with conjugated polymers to create efficient hole transporters. A major bottleneck delaying the further commercialization of thin-film solar cells based on hybrid organohalide lead perovskites is interface loss in state-of-the-art devices. We present a generic interface architecture that combines solution-processed, reliable, and cost-efficient hole-transporting materials without compromising efficiency, stability, or scalability of perovskite solar cells. Tantalum-doped tungsten oxide (Ta-WOx)/conjugated polymer multilayers offer a surprisingly small interface barrier and form quasi-ohmic contacts universally with various scalable conjugated polymers. In a simple device with regular planar architecture and a self-assembled monolayer, Ta-WOx–doped interface–based perovskite solar cells achieve maximum efficiencies of 21.2% and offer more than 1000 hours of light stability. By eliminating additional ionic dopants, these findings open up the entire class of organics as scalable hole-transporting materials for perovskite solar cells.

Controlling additive behavior to reveal an alternative morphology formation mechanism in polymer:fullerene bulk-heterojunctions

One of the most employed morphology optimization methods to design better performing organic photovoltaic devices is ink formulation engineering with additives. In this work, by employing a suboptimal host solvent mixture and 1,8-diiodooctane (DIO) as a very optimal solvent for both components in poly-thieno[3,2b]thiophene-diketopyrrolopyrrole-co-thiophene (DPP-TT-T)-based bulk-heterojunctions (BHJ), an alternative, previously unknown mechanism of additive behavior on BHJ microstructure formation is presented. In situ characterization methods involving grazing incidence X-ray diffraction, white-light reflectometry, laser light scattering and photoluminescence during film drying reveal that the microstructure formation under the influence of DIO is led towards thermodynamic equilibrium during host solvent drying, and the kinetics of morphology formation (i.e. polymer crystallization, fullerene aggregation…) are controlled dominantly by the additive during its evaporation. Ex situ X-ray-based characterization methods, such as scanning transmission X-ray microspectroscopy (STXM) and resonant soft X-ray scattering (R-SoXS), additionally reveal that the microstructure of dried films favors smaller domain sizes with purer domains, smaller fullerene aggregates, bimodal polymer crystallization relative to the substrate and more face-on molecular orientation relative to the donor/acceptor interface, which at the end lead to better performing devices with power conversion efficiencies ranging from 1.25% to 4.68%.