Xiaoying Jin

Removal of methyl orange from aqueous solution using bentonite-supported nanoscale zero-valent iron.

Zero-valent iron (ZVI) nanoparticles tend to agglomerate, resulting in a significant loss in reactivity. To address this issue, synthesized bentonite-supported nanoscale zero-valent iron (B-nZVI) was used to remove azo dye methyl orange (MO) in aqueous solution. Batch experiments show that various parameters, such as pH, initial concentration of MO, dosage, and temperature, were affected by the removal of MO. Scanning electron microscopy (SEM) confirmed that B-nZVI increased their reactivity and a decrease occurred in the aggregation of iron nanoparticles for the presence of bentonite (B). Using B-nZVI, 79.46% of MO was removed, whereas only 40.03% when using nZVI after reacting for 10 min with an initial MO concentration of 100 mg/L (pH=6.5). Furthermore, after B-nZVI reacted to MO, XRD indicated that iron oxides were formed. FTIR showed that no new bands appeared, and UV-vis demonstrated that the absorption peak of MO was degraded. Kinetics studies showed that the degradation of MO fitted well to the pseudo first-order model. A degradation mechanism is proposed, including the following: oxidation of iron, adsorption of MO to B-nZVI, formation of Fe(II)-dye complex, and cleavage of azo bond. Finally, the removal rate of MO from actual wastewater was 99.75% when utilizing B-nZVI.

Removal of Pb(II) from aqueous solution using modified and unmodified kaolinite clay.

Modified kaolinite clay with 25% (w/w) aluminium sulphate and unmodified kaolin were investigated as adsorbents to remove Pb(II) from aqueous solution. The results show that amount of Pb(II) adsorbed onto modified kaolin (20mg/g) was more than 4.5-fold than that adsorbed onto unmodified kaolin (4.2mg/g) under the optimized condition. In addition, the linear Langmuir and Freundlich models were used to describe equilibrium isotherm. It is observed that the data from both adsorbents fitted well to the Langmuir isotherm. The kinetic adsorption of modified and unmodified kaolinite clay fitted well to the pseudo-second-order model. Furthermore, both modified and unmodified kaolinite clay were characterized by X-ray diffraction, Fourier transform infrared (FT-IR) and scanning electron microscope (SEM). Finally, both modified and unmodified kaolinite clay were used to remove metal ions from real wastewater, and results show that higher amount of Pb(II) (the concentration reduced from 178 to 27.5mg/L) and other metal ions were removed by modified kaolinite clay compared with using unmodified adsorbent (the concentration reduced from 178 to 168 mg/L).

Adsorption of methylene blue and orange II onto unmodified and surfactant-modified zeolite.

Adsorption of cationic methylene blue and anionic orange II onto unmodified and surfactant-modified zeolites was studied using a batch equilibration method. The effects of equilibrium time, solution pH, and sorption temperature were examined. The results suggested that 2% sodium dodecyl benzenesulfonate (SDBS)- and 3% sodium dodecyl sulfate (SDS)-modified zeolites had higher adsorption capacities for methylene blue than the unmodified zeolite, while 2% cetylpyridinium bromide hexadecyl (CPB)- and 2% hexadecylammonium bromide (HDTMA)-modified zeolites were the best adsorbents for orange II. The adsorption conditions were optimized, and the mechanisms of adsorption are briefly discussed.

Green synthesis of Fe nanoparticles using eucalyptus leaf extracts for treatment of eutrophic wastewater

Iron nanoparticles were firstly synthesized through a one-step room-temperature biosynthetic route using eucalyptus leaf extracts (EL-Fe NPs). Scanning electron microscopy (SEM) and X-ray energy-dispersive spectrometer (EDS) confirmed the successful synthesis of the spheroidal iron nanoparticles. Furthermore, X-ray diffraction (XRD) and Fourier Transform Infrared spectrometer (FTIR) indicated that some polyphenols are bound to the surfaces of EL-Fe NPs as a capping/stabilizing agent. Reactivity of EL-Fe NPs was evaluated for the treatment of swine wastewater and results indicated that 71.7% of total N and 84.5% of COD were removed, respectively. This demonstrated the tremendous potential of EL-Fe NPs for in situ remediation of eutrophic wastewater.

Synthesis, characterization and kinetic of a surfactant-modified bentonite used to remove As(III) and As(V) from aqueous solution

In this study, organobentonites were prepared by modification of bentonite with various cationic surfactants, and were used to remove As(V) and As(III) from aqueous solution. The results showed that the adsorption capacities of bentonite modified with octadecyl benzyl dimethyl ammonium (SMB3) were 0.288 mg/g for As(V) and 0.102 mg/g for As(III), which were much higher compared to 0.043 and 0.036 mg/g of un-modified bentonite (UB). The adsorption kinetics were fitted well with the pseudo-second-order model with rate constants of 46.7 × 10(-3)g/mgh for As(V) and 3.1 × 10(-3)g/mgh for As(III), respectively. The maximum adsorption capacity of As(V) derived from the Langmuir equation reached as high as 1.48 mg/g, while the maximum adsorption capacity of As(III) was 0.82 mg/g. The adsorption of As(V) and As(III) was strongly dependent on solution pH. Addition of anions did not impact on As(III) adsorption, while they clearly suppressed adsorption of As(V). In addition, this study also showed that desorbed rates were 74.61% for As(V) and 30.32% for As(III), respectively, after regeneration of SMB3 in 0.1M HCl solution. Furthermore, in order to interpret the proposed absorption mechanism, both SMB3 and UB were extensively characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analyses.

Adsorption of Orange II dye in aqueous solution onto surfactant-coated zeolite: Characterization, kinetic and thermodynamic studies

Adsorption of anionic dye - Orange II - in aqueous solution onto hexadecyltrimethylammonium bromide (HDTMA)-coated zeolite (HCZ) reached 38.96mg/g compared with 8.13mg/g onto natural zeolite. Fourier Transform Infrared (FTIR), scanning electronic microscopy (SEM) and X-ray powder diffraction (XRD) data showed that HDTMA-coated zeolite developed surficial positive charges. The adsorption reaction fits the Freundlich isotherm (R(2)=0.93) and the value of 1/n was less than unity (=0.81) and suggest a multi-layer physi-sorption process. The kinetics of the adsorption is a pseudo-second-order model. The activation energy (Ea) of the reaction is +35.70kJ/mol to further support a physi-sorption process while the ΔH(o) (+82.79kJ/mol) is characteristic for an endothermic reaction. The ΔG(o) values of -2.33, -0.98 and -0.37kJ/mol at 25°C, 30°C and 35°C, respectively implied that the adsorption reaction was feasible and thermodynamically spontaneous. We proposed that both electrostatic interactions and partitioning process are involved in the adsorption mechanisms of Orange II dye onto HCZ.

Fenton-like oxidation of 2,4-DCP in aqueous solution using iron-based nanoparticles as the heterogeneous catalyst.

In this report, various iron-based nanoparticles (nZVI, n-Ni/Fe, n-Pd/Fe) were used for both heterogeneous Fenton oxidation of 2,4-dichlorophenol (2,4-DCP) and reductive dechlorination of 2,4-DCP in order to understand their roles in the Fenton oxidation and the reductive degradation of 2,4-DCP. The dechlorination efficiency of 2,4-DCP using nZVI, n-Ni/Fe, n-Fe/Pd and Fe(2)(+) was 6.48%, 6.80%, 15.95%, 5.02%, while Fenton oxidation efficiency of 2,4-DCP was 57.87%, 34.23%, 27.94%, 19.61% after 180 min, respectively. The new findings included a higher dechlorination using n-Fe/Pd due to Pd effective catalysis and the effective heterogeneous Fenton oxidation using nZVI depending on reductive dechlorination and heterogeneous Fenton oxidation occurs simultaneously. However, nZVI as the potential catalyst for heterogeneous Fenton was observed, and SEM, EDS and XRD demonstrate that change on the nZVI surface occurred due to the Fe(2+) leaching, and Total Organic Carbon (TOC) (30.71%) shows that 2,4-DCP was degraded. Furthermore, the experiment indicates that the pH values and concentration of 2,4-DCP significantly impacted on the heterogeneous Fenton oxidation of 2,4-DCP and the data fits well with the pseudo first-order kinetic model, which was a diffusion-controlled reaction. Finally, a possible mechanism for degradation of 2,4-DCP was proposed.

Functional clay supported bimetallic nZVI/Pd nanoparticles used for removal of methyl orange from aqueous solution

Bentonite supported Fe/Pd nanoparticles (B/nZVI/Pd) were synthesized as composites that exhibit functionalities assisting in the removal of methyl orange (MO) from aqueous solution. The results showed that 91.87% of MO was removed using B/nZVI/Pd, while only 85% and 1.41% of MO were removed using nZVI/Pd and bentonite after 10 min, respectively. The new findings include that the presence of bentonite decreased the aggregation of nZVI/Pd and nZVI in the composite played its role as a reductant, while Pd(0) acted as the catalyst to enhance the degradation of MO, which were confirmed by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis analysis and the batch experiments. The increase in B/nZVI/Pd loading led to greater removal efficiency, while decolorization efficiency declined in the presence of anions such as nitrate, sulfite and carbonate, especially nitrate, which decreased the apparent rate constant k(obs) almost 17.06-fold. The kinetics study indicated that the degradation of MO fitted well to the pseudo-first-order model, where the k(obs) was 0.0721 min(-1). Finally, the reactivity of aged B/nZVI/Pd was investigated, and the application of B/nZVI/Pd in wastewater indicated a removal efficiency higher than 93.75%. This provided a new environmental pollution management option for dyes-contaminated sites.

Removal of phosphate using iron oxide nanoparticles synthesized by eucalyptus leaf extract in the presence of CTAB surfactant

This study investigated the use of cetyltrimethylammonium bromide (CTAB) as a stabilizer in green synthesis to improve the reactivity of iron oxide nanoparticles (IONP). Results show that efficiency in removing phosphate increased from 71.0% to 97.3%. To understand how to improve the reactivity of IONP by CTAB: firstly, characterizations of IONP before and after phosphate removal by SEM, EDS, FTIR, XPS show the adsorption of P onto the IONP; secondly, batch experiments indicate that the adsorption capacity of phosphate increased when temperature or initial phosphate concentration increased and decreased with an increase in both adsorbent dose and pH. Adsorption followed the pseudo-second-order kinetics model and the equilibrium data fitted well to the Langmuir isotherm. Thermodynamic data confirmed the spontaneous and endothermic nature of the adsorption process. Finally, it was proposed that the adsorption of phosphate using CTAB-modified IONP was mainly associated with inner-sphere complexing mechanism and electrostatic attraction.

Functional chitosan-stabilized nanoscale zero-valent iron used to remove acid fuchsine with the assistance of ultrasound.

Chitosan-stabilized nanoscale zero-valent iron (CS-nZVI) was prepared and used for the removal of acid fuchsine (AF) from aqueous solution with the assistance of ultrasound. More than 98.9% of AF was removed using CS-nZVI, aged CS-nZVI (exposed to air for 2 months), while only 14.6% removal efficiency was achieved after 15 min by chitosan alone with the assistance of ultrasound. Scanning electron microscopy (SEM) confirmed that chitosan polymers were arranged in a homocentric layered structure. Thus, the polymer can prevent the aggregation of nZVI and increase their anti-oxidation capacity. X-ray diffraction (XRD) also suggested that the chitosan used in synthesis may protect nZVI nanoparticles from air oxidation. Different factors impacting on the removal of AF using CS-nZVI showed that the reduction increased when dosage and temperature increased, but decreased when pH and initial concentration rose. Kinetic studies revealed that the removal of AF fitted well to the pseudo-first-order model. The apparent activation energy was 55.34 kJ/mol, indicating a chemically controlled reaction. Finally, the application of CS-nZVI in dyeing wastewater led to a removal efficiency of 99% of AF, while the reuse test confirmed that AFs removal efficiency declined from 99.6 to 39.3% after seven cycles.