Xinghua Zhang

The estimation of charge footprint size of ultraviolet photon counting imaging detector with induction readout.

The structure and work principle of an ultraviolet photon counting imaging detector based on wedge and strip anode with induction readout mode are introduced. Two methods of estimating the charge footprint size are presented. One way is theoretical calculation and simulation. The physical course of electrons is simulated from the microchannel plate output side to the readout anode. The calculated results show that the final charge footprint size is sensitive to the thickness of ceramic and not sensitive to the charge footprint size on the Ge layer. The other way is experimental image estimation. The final charge footprint size can be estimated according to the position where the light line of resolution board image begins to bend. Both methods show that the charge footprint size is sensitive to the ceramic substrate. The two methods are simple and effective for estimation of charge footprint size of photon counting imaging detector with induction readout.

7Be, 8B+208Pb Elastic Scattering at Above-Barrier Energies

Angular distributions for the elastic scattering of 7Be and 8B by an enriched 208Pb target were measured at the Radioactive Ion Beam Line at Lanzhou (RIBLL). The incident energies of the radioactive beams were about three times the respective Coulomb barriers. A suppressed Coulomb-nuclear Interference Peak (CNIP) is not observed for 8B, a pronounced proton halo nucleus. Optical model fits were performed using Woods-Saxon potentials and the total reaction cross sections deduced. The results are discussed.

Correction of ultraviolet single photon counting image distortion

Single photon counting imaging technology has been widely used in space environment detection, astronomy observation, nuclear physics, and ultraweak bioluminescence. However, the distortion of the single photon counting image will badly affect the measurement results. Therefore, the correction of distortion for single photon counting image is very significant. Ultraviolet single photon imaging system with wedge and strip anode is introduced and the influence factor leading to image distortion is analyzed. To correct original distorted image, three different image correction methods, namely, the physical correction, the global correction, and the local correction, are applied. In addition, two parameters, i.e., the position index and the linearity index, are defined to evaluate the performance of the three methods. The results suggest that the correction methods can improve the quality of the initial image without losing gray information of each counting light spot. And the local correction can provide the best visual inspections and performance evaluation among the three methods.

Influence of annealing temperature on the performance of Ge film and photon-counting imaging system

Compared with the traditional image intensifier with phosphor screen readout, the photon-counting imaging detector with charge induction readout is more beneficial in several aspects (e.g., good imaging properties and time resolution) to astronomy, reconnaissance, bioluminescence, and materials research. However, the annealing temperature during the tube-making process can affect the properties of the Ge film, and consequently impair the performance of the detector. Therefore, the influence of annealing temperature on Ge film and on the detector is studied in order to determine the crucial parameters. The Ge films are prepared on ceramic and quartz glass by the use of an electron gun. They are analyzed by scanning electron microscope (SEM), high-resistance meter, and X-ray diffraction (XRD). The results show that the optimum substrate and annealing temperature are ceramic plate and 250 ?, respectively.

A new photon counting imaging detector for the Chinese ChangE-2 EUV explorer mission

This paper describes the preliminary design and performances of a new developed photon counting imaging detector for Chinese ChangE-2 EUV explorer mission. The detector consists of microchannel plate (MCP) stacks and wedge and strip anode and corresponding data read out electronics. The experimental results shows that the new developed detector has a spatial resolution of about 75μm, image distortions are small and dark noise count rate less than 0.4 counts cm-2s-1. The pulse height distribution vs MCP operating voltages and the flat field performances are also discussed.