Xingjie Ni

Broadband Light Bending with Plasmonic Nanoantennas

A plasmonic antenna array is used to control the propagation of a light beam across an interface. The precise manipulation of a propagating wave using phase control is a fundamental building block of optical systems. The wavefront of a light beam propagating across an interface can be modified arbitrarily by introducing abrupt phase changes. We experimentally demonstrated unparalleled wavefront control in a broadband optical wavelength range from 1.0 to 1.9 micrometers. This is accomplished by using an extremely thin plasmonic layer (~λ/50) consisting of an optical nanoantenna array that provides subwavelength phase manipulation on light propagating across the interface. Anomalous light-bending phenomena, including negative angles of refraction and reflection, are observed in the operational wavelength range.

Loss-free and active optical negative-index metamaterials

The recently emerged fields of metamaterials and transformation optics promise a family of exciting applications such as invisibility, optical imaging with deeply subwavelength resolution and nanophotonics with the potential for much faster information processing. The possibility of creating optical negative-index metamaterials (NIMs) using nanostructured metal–dielectric composites has triggered intense basic and applied research over the past several years. However, the performance of all NIM applications is significantly limited by the inherent and strong energy dissipation in metals, especially in the near-infrared and visible wavelength ranges. Generally the losses are orders of magnitude too large for the proposed applications, and the reduction of losses with optimized designs seems to be out of reach. One way of addressing this issue is to incorporate gain media into NIM designs. However, whether NIMs with low loss can be achieved has been the subject of theoretical debate. Here we experimentally demonstrate that the incorporation of gain material in the high-local-field areas of a metamaterial makes it possible to fabricate an extremely low-loss and active optical NIM. The original loss-limited negative refractive index and the figure of merit (FOM) of the device have been drastically improved with loss compensation in the visible wavelength range between 722 and 738 nm. In this range, the NIM becomes active such that the sum of the light intensities in transmission and reflection exceeds the intensity of the incident beam. At a wavelength of 737 nm, the negative refractive index improves from −0.66 to −1.017 and the FOM increases from 1 to 26. At 738 nm, the FOM is expected to become macroscopically large, of the order of 106. This study demonstrates the possibility of fabricating an optical negative-index metamaterial that is not limited by the inherent loss in its metal constituent.

An ultrathin invisibility skin cloak for visible light

Wrap-around invisibility cloak An invisibility cloak can be used to conceal an object from view by guiding light around it. Most cloaks developed so far have bulky structures that are difficult to scale up for hiding large objects. To design a thin invisibility cloak that can be wrapped around an object such as a sheet or skin, Ni et al. designed a two-dimensional metamaterial surface. Such flexible, highly reflective materials could be manufactured at large scale to hide large objects. Science, this issue p. 1310 A metamaterial surface can be designed to operate as an invisibility skin cloak. Metamaterial-based optical cloaks have thus far used volumetric distribution of the material properties to gradually bend light and thereby obscure the cloaked region. Hence, they are bulky and hard to scale up and, more critically, typical carpet cloaks introduce unnecessary phase shifts in the reflected light, making the cloaks detectable. Here, we demonstrate experimentally an ultrathin invisibility skin cloak wrapped over an object. This skin cloak conceals a three-dimensional arbitrarily shaped object by complete restoration of the phase of the reflected light at 730-nanometer wavelength. The skin cloak comprises a metasurface with distributed phase shifts rerouting light and rendering the object invisible. In contrast to bulky cloaks with volumetric index variation, our device is only 80 nanometer (about one-ninth of the wavelength) thick and potentially scalable for hiding macroscopic objects.

Electrically tunable damping of plasmonic resonances with graphene.

Dynamic switching of a plasmonic resonance may find numerous applications in subwavelength optoelectronics, spectroscopy, and sensing. Graphene shows a highly tunable carrier concentration under electrostatic gating, and this could provide an effective route to achieving electrical control of the plasmonic resonance. In this Letter, we demonstrate electrical control of a plasmonic resonance at infrared frequencies using large-area graphene. Plasmonic structures fabricated on graphene enhance the interaction of the incident optical field with the graphene sheet, and the impact of graphene is much stronger at mid-infrared wavelengths. Full-wave simulations, where graphene is modeled as a 1 nm thick effective medium, show excellent agreement with experimental results.

Titanium nitride as a plasmonic material for visible and near-infrared wavelengths

The search for alternative plasmonic materials with improved optical properties, easier fabrication and integration capabilities over those of the traditional materials such as silver and gold could ultimately lead to real-life applications for plasmonics and metamaterials. In this work, we show that titanium nitride could perform as an alternative plasmonic material in the visible and near-infrared regions. We demonstrate the excitation of surface-plasmon-polaritons on titanium nitride thin films and discuss the performance of various plasmonic and metamaterial structures with titanium nitride as the plasmonic component. We also show that titanium nitride could provide performance that is comparable to that of gold for plasmonic applications and can significantly outperform gold and silver for transformation-optics and some metamaterial applications in the visible and near-infrared regions.

Loss-compensated and active hyperbolic metamaterials

We have studied the dispersion relations of multilayers of silver and a dye-doped dielectric using four methods: standard effective-medium theory (EMT), nonlocal-effect-corrected EMT, nonlinear equations based on the eigenmode method, and a spatial harmonic analysis method. We compare the validity of these methods and show that metallic losses can be greatly compensated by saturated gain. Two realizable applications are also proposed. Loss-compensated metal-dielectric multilayers that have hyperbolic dispersion relationships are beneficial for numerous applications such as subwavelength imaging and quantum optics.

Feedback-driven self-assembly of symmetry-breaking optical metamaterials in solution.

Thermodynamically driven self-assembly offers a direct route to organize individual nanoscopic components into three-dimensional structures over a large scale. The most thermodynamically favourable configurations, however, may not be ideal for some applications. In plasmonics, for instance, nanophotonic constructs with non-trivial broken symmetries can display optical properties of interest, such as Fano resonance, but are usually not thermodynamically favoured. Here, we present a self-assembly route with a feedback mechanism for the bottom-up synthesis of a new class of symmetry-breaking optical metamaterials. We self-assemble plasmonic nanorod dimers with a longitudinal offset that determines the degree of symmetry breaking and its electromagnetic response. The clear difference in plasmonic resonance profiles of nanorod dimers in different configurations enables high spectra selectivity. On the basis of this plasmonic signature, our self-assembly route with feedback mechanism promotes the assembly of desired metamaterial structures through selective excitation and photothermal disassembly of unwanted assemblies in solution. In this fashion, our method can selectively reconfigure and homogenize the properties of the dimer, leading to highly monodispersed aqueous metamaterials with tailored symmetries and electromagnetic responses.

The validation of the parallel three-dimensional solver for analysis of optical plasmonic bi-periodic multilayer nanostructures

Fundamentals of the three-dimensional spatial harmonic analysis (SHA) approach are reviewed, and the advantages of a fast-converging formulation versus the initial SHA formulation are emphasized with examples using periodic plasmonic nanostructures. First, two independent parallel versions of both formulations are implemented using the scattering matrix algorithm for multilayer cascading. Then, by comparing the results from both formulations, it is shown that choosing an advanced fast-converging scheme could be essential for accurate and efficient modeling of plasmonic structures. Important obstacles to the fast parallel implementation of this approach are also revealed. The results of test simulations are validated using the data obtained from a commercial finite-element method (FEM) simulations and from the experimental characterization of fabricated samples.

Bianisotropic Effective Parameters of Optical Metamagnetics and Negative-Index Materials

Approaches to the adequate homogenization of optical metamaterials are becoming more and more complex, primarily due to an increased understanding of the role of asymmetric electrical and magnetic responses, in addition to the nonlocal effects of the surrounding medium, even in the simplest case of plane-wave illumination. The current trend in developing such advanced homogenization descriptions often relies on utilizing bianisotropic models as a base on top of which novel optical characterization techniques can be built. In this paper, we first briefly review general principles for developing a bianisotropic homogenization approach. Second, we present several examples validating and illustrating our approach using single-period passive and active optical metamaterials. We also show that the substrate may have a significant effect on the bianisotropic characteristics of otherwise symmetric passive and active metamaterials.

Experimental demonstration of in-plane negative-angle refraction with an array of silicon nanoposts.

Controlling an optical beam is fundamental in optics. Recently, unique manipulation of optical wavefronts has been successfully demonstrated by metasurfaces. However, these artificially engineered nanostructures have thus far been limited to operate on light beams propagating out-of-plane. The in-plane operation is critical for on-chip photonic applications. Here, we demonstrate an anomalous negative-angle refraction of a light beam propagating along the plane, by designing a thin dielectric array of silicon nanoposts. The circularly polarized dipoles induced by the high-permittivity nanoposts at the scattering resonance significantly shape the wavefront of the light beam and bend it anomalously. The unique capability of a thin line of the nanoposts for manipulating in-plane wavefronts makes the device extremely compact. The low loss all-dielectric structure is compatible with complementary metal-oxide semiconductor technologies, offering an effective solution for in-plane beam steering and routing for on-chip photonics.