Xingyuan Ma

Mutant Library Construction in Directed Molecular Evolution

Directed molecular evolution imitates the natural selection process in the laboratory to find mutant proteins with improved properties in the expected aspects by exploring the encoding sequence space. The success of directed molecular evolution experiment depends on the quality of artificially prepared mutant libraries and the availability of convenient high-throughput screening methods. Well-prepared libraries promise the possibility of obtaining desired mutants by screening a library containing a relatively small number of mutants. This article summarizes and reviews the currently available methodologies widely used in directed evolution practices in the hope of providing a general reference for library construction. These methods include error-prone polymerase chain reaction (epPCR), oligonucleotide-based mutagenesis, and genetic recombination exemplified by DNA shuffling and its derivatives. Another designed method is also discussed, in which B-lymphocytes are fooled to mutate nonantibody foreign proteins through somatic hypermutation (SHM).

Functionalization of single-walled carbon nanotubes enables efficient intracellular delivery of siRNA targeting MDM2 to inhibit breast cancer cells growth

The delivery of DNA or RNA to cells represents the limiting step in the development of cancer gene therapy and RNA interference protocols. Single walled carbon nanotubes (SWNTs) are of interest as carriers of biologically active molecules because of their ability to cross cell membranes. In this study, we developed a novel strategy for chemical functionalization of SWNTs (f-SWCNTs) with DSPE-PEG-Amine to bind small interfering RNA (siRNA) by disulfide bonds applied to siRNA-mediated gene silencing in breast cancer cells. Results indicated the efficiency of f-SWNTs carrying siRNA reached 83.55%, and the new f-SWNTs-siRNA-MDM2 complexes were successfully introduced into the breast carcinoma B-Cap-37 cells at a concentration of 100 nM in mediums, and caused proliferation inhibition of B-Cap-37 cells significantly. The proliferation inhibition ratio of B-Cap-37 cells was detected as 44.53% for 72 h, and the apoptosis ratio was measured as 30.45%. It was obvious that MDM2 can serve as a novel therapeutic target by an effective carrier system of DSPE-PEG-Amine-functionalized SWNTs, which would be very advanced and significant to therapy of breast cancer further.

Effects of over-expression of glycerol dehydrogenase and 1,3-propanediol oxidoreductase on bioconversion of glycerol into 1,3-propandediol by Klebsiella pneumoniae under micro-aerobic conditions

Glycerol dehydrogenase (GDH) and 1,3-propanediol (1,3-PD) oxidoreductase had been proved two key enzymes for 1,3-PD production by Klebsiella pneumoniae. Fed-batch fermentations of the recombinant K. pneumoniae strains, over-expressing the two enzymes individually, were carried out under micro-aerobic conditions, and the behaviors of the recombinants were investigated. Results showed that over-expression of 1,3-PD oxidoreductase did not affect the concentration of 1,3-PD. However, it enhanced the molar yield from 50.6 to 64.0% and reduced the concentration of by-products. Among them, the concentrations of lactic acid, ethanol and succinic acid were decreased by 51.8, 50.6 and 47.4%, respectively. Moreover, in the recombinant the maximal concentration of 3-hydroxypropionaldehyde decreased by 73.6%. Over-expression of GDH decreased the yield of ethanol and 2,3-butanediol, meanwhile it increased the concentration of acetic acid. No significant changes were observed both in 1,3-PD yield and glycerol flux distributed to oxidative branch.

Available methods for assembling expression cassettes for synthetic biology

Studies in the structural biology of the multicomponent protein complex, metabolic engineering, and synthetic biology frequently rely on the efficient over-expression of these subunits or enzymes in the same cell. As a first step, constructing the multiple expression cassettes will be a complicated and time-consuming job if the classic and conventional digestion and ligation based cloning method is used. Some more efficient methods have been developed, including (1) the employment of a multiple compatible plasmid expression system, (2) the rare-cutter-based design of vectors, (3) in vitro recombination (sequence and ligation independent cloning, the isothermally enzymatic assembly of DNA molecules in a single reaction), and (4) in vivo recombination using recombination-efficient yeast (in vivo assembly of overlapping fragments, reiterative recombination for the chromosome integration of foreign expression cassettes). In this review, we systematically introduce these available methods.

Overview of Regulatory Strategies and Molecular Elements in Metabolic Engineering of Bacteria

From a viewpoint of biotechnology, metabolic engineering mainly aims to change the natural status of a pathway in a microorganism towards the overproduction of certain bioproducts. The biochemical nature of a pathway implies us that changed pathway is often the collective results of altered behavior of the metabolic enzymes encoded by corresponding genes. By finely modulating the expression of these genes or the properties of the enzyme, we can gain efficient control on the pathway. In this article, we reviewed the typical methods that have been applied to regulate the expression of genes in metabolic engineering. These methods are grouped according to the operation targets in a typical gene. The transcription of a gene is controlled by an indispensable promoter. By utilizing promoters with different strengths, expected levels of expression can be easily achieved, and screening a promoter library may find suitable mutant promoters that can provide tunable expression of a gene. Auto-responsive promoter (quorum sensing (QS)-based or oxygen-inducible) simplifies the induction process by driving the expression of a gene in an automated manner. Light responsive promoter enables reversible and noninvasive control on gene activity, providing a promising method in controlling gene expression with time and space resolution in metabolic engineering involving complicated genetic circuits. Through directed evolution and/or rational design, the encoding sequences of a gene can be altered, leading to the possibly most profound changes in properties of a metabolic enzyme. Introducing an engineered riboswitch in mRNA can make it a regulatory molecule at the same time; ribosomal binding site is commonly engineered to be more attractive for a ribosome through design. Terminator of a gene will affect the stability of an mRNA, and intergenic region will influence the expression of many related genes. Improving the performance of these elements are generally the main activities in metabolic engineering.

Molecular cloning and bioinformatics analysis of a novel spliced variant of survivin from human breast cancer cells

Survivin gene and its two alternatively spliced variants, survivin-2 B and survivin- Δ Ex3 gene were cloned from human breast cancer cell lines B-cap37 firstly. A new gene designated as survivin-image (SI) was cloned from above cell lines, which has not been reported yet to clone from any cell lines. It was found that the novel gene 507 bp comprises partial survivin gene (345 bp), partial image gene (155 bp) of eye cancer and other insertion of 7 bp by analyzing with a series of recent bioinformatics software at the level of nucleotide and protein deduced. Predicted 3-D structures of the new molecule showed greatly similar to that of survivin in N-terminal containing BIR by homology modeling. These results suggested SI gene (GenBank accession No.AY830084) might be a novel alternatively spliced isoforms of the survivin gene involved in other functional significances related to tumorigenesis.

Structure-Based Stabilization of an Enzyme: The Case of Penicillin Acylase from Alcaligenes faecalis

The modeled structure of penicillin acylase from Alcaligenes faecali (AFPGA) was constructed by comparative modeling with the Modeller program. Candidate positions that could be replaced with cysteine were estimated by scanning the modeled structure of AFPGA with the program MODIP (modeling disulfide bond in protein). The mutant Q3C/P751C had a higher optimum temperature by three degrees than that of the wild type AFPGA. The half life of the double mutant Q3C/P751C at 55 degrees C was increased by 50%. To our knowledge, this was the first structure-based genetic modification of AFPGA.

Enhancing enzymatic activity of penicillin G acylase by coexpressing pcm gene.

Penicillin G acylase (PGA; E.C. 3.5.1.11) is an important enzyme which has broad applications in industries of β-lactim antibiotics production. In this study, a promising PGA gene from Alcaligenes faecalis (afpga) and another pcm gene encoding protein isoaspartate methyltransferase (PIMT) were constructed into pET43.1a(+) and pET28a(+), respectively. The recombinant plasmids pETAFPGA and pETPCM were transformed into the same host cell Escherichia coli BL21 (DE3). Results suggested that the two plasmids could peacefully exist in the host cell and the two genes could be efficiently expressed after induction. The product of pcm gene could function as a helper molecule for enzyme AFPGA. PIMT increased the enzymatic activities in supernatant of ferment broth (1.6 folds) and cell lysate (1.8 folds), while it did not significantly affect the expression level of penicillin G acylase.

Discovery of the cell-penetrating function of A2 domain derived from LTA subunit of Escherichia coli heat-labile enterotoxin

Heat-labile enterotoxin (LT) is a protein toxin produced by enterotoxigenic Escherichia coli (ETEC). As a bacterial toxin, LT holotoxin can enter intestinal epithelial cells and cause diarrhea. In addition, LT is also a powerful mucosal adjuvant capable of enhancing the strong immune responses to co-administered antigens. However, the LT immunological mechanism is still not clear in some aspects, especially with the respect to how the LTA subunit functions alone. Here, we discovered that the A2 domain of LTA could carry a fluorescent protein into cells, whose function is similar to a cell-penetrating peptide. The transmembrane-transporting ability of the A2 domain is non-specific in its cell-penetrating function, which was shown through testing with different cell types. Moreover, the LTA2 fusion protein penetrated a fluorescently labeled cell membrane that identified LTA2 internalization through membrane transport pathways, and showed it finally localized in the endoplasmic reticulum. Furthermore, low-temperature stress and pharmacological agent treatments showed that the LTA2 internalization route is a temperature-dependent process involving the clathrin-mediated endocytosis and the macropinocytosis pathways. These results could explain the internalization of the LTA subunit alone without the LTB pentamer, contributing to a better understanding of LTA working as a mucosal adjuvant; they also suggest that the A2 domain could be used as a novel transport vehicle for research and treatment of disease.

Genetic protein TmSm(T34A) enhances sensitivity of chemotherapy to breast cancer cell lines as a synergistic drug to doxorubicin.

In order to eliminate common side effects to cancer patients and resistance from chemotherapy, a genetic protein TmSm(T34A) was investigated as a sensitizer to doxorubicin. The results indicated TmSm(T34A) enhanced the sensitivity of three breast cancer cell lines to doxorubicin with low dose, and reduced the dose of doxorubicin significantly in contrast to common effective dose. As a synergistic therapy, the TmSm(T34A) also caused strongest apoptotic activity in MCF-7, and the possible molecular mechanisms were explored primarily. The research showed the TmSm(T34A) is promising to be a potential drug in strengthening therapy effects of breast cancer chemotherapy.