Xinming Tong

Bioengineered 3D brain tumor model to elucidate the effects of matrix stiffness on glioblastoma cell behavior using PEG-based hydrogels.

Glioblastoma (GBM) is the most common and aggressive form of primary brain tumor with a median survival of 12-15 months, and the mechanisms underlying GBM tumor progression remain largely elusive. Given the importance of tumor niche signaling in driving GBM progression, there is a strong need to develop in vitro models to facilitate analysis of brain tumor cell-niche interactions in a physiologically relevant and controllable manner. Here we report the development of a bioengineered 3D brain tumor model to help elucidate the effects of matrix stiffness on GBM cell fate using poly(ethylene-glycol) (PEG)-based hydrogels with brain-mimicking biochemical and mechanical properties. We have chosen PEG given its bioinert nature and tunable physical property, and the resulting hydrogels allow tunable matrix stiffness without changing the biochemical contents. To facilitate cell proliferation and migration, CRGDS and a MMP-cleavable peptide were chemically incorporated. Hyaluronic acid (HA) was also incorporated to mimic the concentration in the brain extracellular matrix. Using U87 cells as a model GBM cell line, we demonstrate that such biomimetic hydrogels support U87 cell growth, spreading, and migration in 3D over the course of 3 weeks in culture. Gene expression analyses showed U87 cells actively deposited extracellular matrix and continued to upregulate matrix remodeling genes. To examine the effects of matrix stiffness on GBM cell fate in 3D, we encapsulated U87 cells in soft (1 kPa) or stiff (26 kPa) hydrogels, which respectively mimics the matrix stiffness of normal brain or GBM tumor tissues. Our results suggest that changes in matrix stiffness induce differential GBM cell proliferation, morphology, and migration modes in 3D. Increasing matrix stiffness led to delayed U87 cell proliferation inside hydrogels, but cells formed denser spheroids with extended cell protrusions. Cells cultured in stiff hydrogels also showed upregulation of HA synthase 1 and matrix metalloproteinase-1 (MMP-1), while simultaneously downregulating HA synthase 2 and MMP-9. This suggests that varying matrix stiffness can induce differential ECM deposition and remodeling by employing different HA synthases or MMPs. Furthermore, increasing matrix stiffness led to simultaneous upregulation of Hras, RhoA, and ROCK1, suggesting a potential link between the mechanosensing pathways and the observed differential cell responses to changes in matrix stiffness. The bioengineered 3D hydrogel platform reported here may provide a useful 3D in vitro brain tumor model for elucidating the mechanisms underlying GBM progression, as well as for evaluating the efficacy of potential drug candidates for treating GBM.

Engineering interpenetrating network hydrogels as biomimetic cell niche with independently tunable biochemical and mechanical properties

Hydrogels have been widely used as artificial cell niche to mimic extracellular matrix with tunable properties. However, changing biochemical cues in hydrogels developed-to-date would often induce simultaneous changes in mechanical properties, which do not support mechanistic studies on stem cell-niche interactions. Here we report the development of a PEG-based interpenetrating network (IPN), which is composed of two polymer networks that can independently and simultaneously crosslink to form hydrogels in a cell-friendly manner. The resulting IPN hydrogel allows independently tunable biochemical and mechanical properties, as well as stable and more homogeneous presentation of biochemical ligands in 3D than currently available methods. We demonstrate the potential of our IPN platform for elucidating stem cell-niche interactions by modulating osteogenic differentiation of human adipose-derived stem cells. The versatility of such IPN hydrogels is further demonstrated using three distinct and widely used polymers to form the mechanical network while keeping the biochemical network constant.

The effects of varying poly(ethylene glycol) hydrogel crosslinking density and the crosslinking mechanism on protein accumulation in three-dimensional hydrogels

Matrix stiffness has been shown to play an important role in modulating various cell fate processes such as differentiation and cell cycle. Given that the stiffness can be easily tuned by varying the crosslinking density, poly(ethylene glycol) (PEG) hydrogels have been widely used as an artificial cell niche. However, little is known about how changes in the hydrogel crosslinking density may affect the accumulation of exogenous growth factors within 3-D hydrogel scaffolds formed by different crosslinking mechanisms. To address such shortcomings, we measured protein diffusivity and accumulation within PEG hydrogels with varying PEG molecular weight, concentration and crosslinking mechanism. We found that protein accumulation increased substantially above a critical mesh size, which was distinct from the protein diffusivity trend, highlighting the importance of using protein accumulation as a parameter to better predict the cell fates in addition to protein diffusivity, a parameter commonly reported by researchers studying protein diffusion in hydrogels. Furthermore, we found that chain-growth-polymerized gels allowed more protein accumulation than step-growth-polymerized gels, which may be the result of network heterogeneity. The strategy used here can help quantify the effects of varying the hydrogel crosslinking density and crosslinking mechanism on protein diffusion in different types of hydrogel. Such tools could be broadly useful for interpreting cellular responses in hydrogels of varying stiffness for various tissue engineering applications.

Improved Approach for Chondrogenic Differentiation of Human Induced Pluripotent Stem Cells

Human induced pluripotent stem cells (hiPSCs) have demonstrated great potential for hyaline cartilage regeneration. However, current approaches for chondrogenic differentiation of hiPSCs are complicated and inefficient primarily due to intermediate embryoid body formation, which is required to generate endodermal, ectodermal, and mesodermal cell lineages. We report a new, straightforward and highly efficient approach for chondrogenic differentiation of hiPSCs, which avoids embryoid body formation. We differentiated hiPSCs directly into mesenchymal stem /stromal cells (MSC) and chondrocytes. hiPSC-MSC-derived chondrocytes showed significantly increased Col2A1, GAG, and SOX9 gene expression compared to hiPSC-MSCs. Following transplantation of hiPSC-MSC and hiPSC-MSC-derived chondrocytes into osteochondral defects of arthritic joints of athymic rats, magnetic resonance imaging studies showed gradual engraftment, and histological correlations demonstrated hyaline cartilage matrix production. Results present an efficient and clinically translatable approach for cartilage tissue regeneration via patient-derived hiPSCs, which could improve cartilage regeneration outcomes in arthritic joints.

Evaluation of an in situ chemically crosslinked hydrogel as a long-term vitreous substitute material

Currently there is no material that can be used as a long-term vitreous substitute, and this remains an unmet clinical need in ophthalmology. In this study, we developed an injectable, in situ chemically crosslinked hydrogel system and evaluated it in a rabbit model. The system consisted of two components, both based on multi-functional poly(ethylene glycol) (PEG) but with complementarily reactive end groups of thiol and active vinyl groups, respectively. The two components are mixed and injected as a solution mixture, react in vivo via the Michael addition route and form a chemically crosslinked hydrogel in situ. The linkages between the end groups and the backbone PEG chains are specially designed to ensure that the final network structure is hydrolysis-resistant. In the rabbit study and with an optimized operation protocol, we demonstrated that the hydrogel indeed formed in situ after injection, and remained transparent and stable during the study period of 9 months without significant adverse reactions. In addition, the hydrogel formed in situ showed rheological properties very similar to the natural vitreous. Therefore, our study demonstrated that this in situ chemically crosslinked PEG gel system is suitable as a potential long-term vitreous substitute.

Synthesis and characterization of block copolymers comprising a polyrotaxane middle block flanked by two brush-like PCL blocks

A polyrotaxane was prepared via atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA) initiated by a polypseudorotaxane self-assembled from a distal 2-bromoisobutyryl end-capped poly(ethylene glycol) (BriB–PEG–iBBr) with α-cyclodextrins (α-CDs). Then it was used to initiate bulk ring-opening polymerization (ROP) of e-caprolactone (CL) to give block copolymers comprising a polyrotaxane middle block flanked by two brush-like polycaprolactone (PCL) blocks. The structure of both the polyrotaxane and its CL derivatives was characterized by 1H NMR, GPC, FT-IR, XRD, DSC and TG analyses. These polyrotaxane-derived block brush-like copolymers can be cast into self-standing films from CH2Cl2 and self-assemble into nano-sized particles in THF as well. Furthermore they can melt at round 60 °C, showing the potential for melt-processing.

Photo‐crosslinkable PEG‐Based Microribbons for Forming 3D Macroporous Scaffolds with Decoupled Niche Properties

PEG-based microribbons are designed and fabricated as building blocks for constructing a 3D cell niche with independently tunable biochemical, mechanical, and topographical cues. This platform supports direct cell encapsulation, allows spatial patterning of biochemical cues, and may provide a valuable tool for facilitating the analyses of how interactive niche signaling regulates cell fate in three dimensions.

Modulating polymer chemistry to enhance non-viral gene delivery inside hydrogels with tunable matrix stiffness.

Non-viral gene delivery holds great promise for promoting tissue regeneration, and offers a potentially safer alternative than viral vectors. Great progress has been made to develop biodegradable polymeric vectors for non-viral gene delivery in 2D culture, which generally involves isolating and modifying cells in vitro, followed by subsequent transplantation in vivo. Scaffold-mediated gene delivery may eliminate the need for the multiple-step process in vitro, and allows sustained release of nucleic acids in situ. Hydrogels are widely used tissue engineering scaffolds given their tissue-like water content, injectability and tunable biochemical and biophysical properties. However, previous attempts on developing hydrogel-mediated non-viral gene delivery have generally resulted in low levels of transgene expression inside 3D hydrogels, and increasing hydrogel stiffness further decreased such transfection efficiency. Here we report the development of biodegradable polymeric vectors that led to efficient gene delivery inside poly(ethylene glycol) (PEG)-based hydrogels with tunable matrix stiffness. Photocrosslinkable gelatin was maintained constant in the hydrogel network to allow cell adhesion. We identified a lead biodegradable polymeric vector, E6, which resulted in increased polyplex stability, DNA protection and achieved sustained high levels of transgene expression inside 3D PEG-DMA hydrogels for at least 12 days. Furthermore, we demonstrated that E6-based polyplexes allowed efficient gene delivery inside hydrogels with tunable stiffness ranging from 2 to 175 kPa, with the peak transfection efficiency observed in hydrogels with intermediate stiffness (28 kPa). The reported hydrogel-mediated gene delivery platform using biodegradable polyplexes may serve as a local depot for sustained transgene expression in situ to enhance tissue engineering across broad tissue types.

Sliding Hydrogels with Mobile Molecular Ligands and Crosslinks as 3D Stem Cell Niche.

The development of a sliding hydrogel with mobile crosslinks and biochemical ligands as a 3D stem cell niche is reported. The molecular mobility of this sliding hydrogel allows stem cells to reorganize the surrounding ligands and change their morphology in 3D. Without changing matrix stiffness, sliding hydrogels support efficient stem cell differentiation toward multiple lineages including adipogenesis, chondrogenesis, and osteogenesis.

A facile method to fabricate hydrogels with microchannel-like porosity for tissue engineering.

Hydrogels are widely used as three-dimensional (3D) tissue engineering scaffolds due to their tissue-like water content, as well as their tunable physical and chemical properties. Hydrogel-based scaffolds are generally associated with nanoscale porosity, whereas macroporosity is highly desirable to facilitate nutrient transfer, vascularization, cell proliferation and matrix deposition. Diverse techniques have been developed for introducing macroporosity into hydrogel-based scaffolds. However, most of these methods involve harsh fabrication conditions that are not cell friendly, result in spherical pore structure, and are not amenable for dynamic pore formation. Human tissues contain abundant microchannel-like structures, such as microvascular network and nerve bundles, yet fabricating hydrogels containing microchannel-like pore structures remains a great challenge. To overcome these limitations, here we aim to develop a facile, cell-friendly method for engineering hydrogels with microchannel-like porosity using stimuli-responsive microfibers as porogens. Microfibers with sizes ranging 150-200 μm were fabricated using a coaxial flow of alginate and calcium chloride solution. Microfibers containing human embryonic kidney (HEK) cells were encapsulated within a 3D gelatin hydrogel, and then exposed to ethylenediaminetetraacetic acid (EDTA) solution at varying doses and duration. Scanning electron microscopy confirmed effective dissolution of alginate microfibers after EDTA treatment, leaving well-defined, interconnected microchannel structures within the 3D hydrogels. Upon release from the alginate fibers, HEK cells showed high viability and enhanced colony formation along the luminal surfaces of the microchannels. In contrast, HEK cells in non-EDTA treated control exhibited isolated cells, which remained entrapped in alginate microfibers. Together, our results showed a facile, cell-friendly process for dynamic microchannel formation within hydrogels, which may simultaneously release cells in 3D hydrogels in a spatiotemporally controlled manner. This platform may be adapted to include other cell-friendly stimuli for porogen removal, such as Matrix metalloproteinase-sensitive peptides or photodegradable gels. While we used HEK cells in this study as proof of principle, the concept described in this study may also be used for releasing clinically relevant cell types, such as smooth muscle and endothelial cells that are useful for repairing tissues involving tubular structures.