Xinwei Li

Aggregation behavior of a chiral long-chain ionic liquid in aqueous solution.

The synthesis of a chiral long-chain ionic liquid (IL), S-3-hexadecyl-1-(1-hydroxy-propan-2-yl)-imidazolium bromide ([C(16)hpim]Br), is presented. The adsorption and aggregation of this surface active IL in aqueous solution is described. The critical micelle concentration (cmc) measurement suggests that the chiral IL has superior capacity for micelle formation compared to traditional ionic surfactants. The relatively larger hydrophilic head group of the IL results in a larger maximum surface excess concentration (Gamma(max)) and a smaller minimum molecular cross-sectional area (A(min)). Electrical conductivity studies show a small degree of counterion binding to these micelles, which may increase the electrostatic repulsions between the hydrophilic heads of adjacent surfactant molecules. Both factors of the hydrophilic headgroup size and electrostatic repulsion in [C(16)hpim]Br micelles lead to a looser packing of the surfactant molecules in the micelles. As a result, a higher micropolarity and smaller mean aggregation number is observed. Moreover, the looser micellar packing of the [C(16)hpim]Br molecules results in a unusual upfield shift of the proton NMR signals in the hydrophobic chains after micelle formation. (1)H NMR and 2D ROESY spectroscopic analyses confirm a chiral arrangement of the micelles. Chiral IL micelles may have potential applications in the stereochemical recognition of surfaces or of biological structures.

Microstructures of Micellar Aggregations Formed within 1-Butyl-3-methylimidazolium Type Ionic Liquids

Nonionic surfactant Triton X-100 was shown to aggregate and form micellar aggregation in ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF(4)) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF(6)). The surface tension measurements revealed that the dissolution of Triton X-100 in ILs depressed the surface tension in a manner analogous to aqueous solutions, and a relatively higher critical micellar concentration (CMC) was obtained compared to that of water. Freeze-fracture transmission electron microscopy (FFTEM) shows that the micelles have an irregular droplet shape, which is larger than that formed in water. The micellar droplets preferred to assemble into larger clusters. (1)H NMR and two-dimensional rotating frame nuclear Overhauser effect (NOE) experiments (2D ROESY) show that the addition of Triton X-100 destroyed the ion pairs of pure ILs due to the electrostatic interaction between the positively charged imidazolium cation of ILs and the electronegative oxygen atoms of oxyethylene (OE) units of Triton X-100. The electrostatic interaction behaves similar to hydrogen bond that occurred between the OE units of nonionic surfactants and water molecules in aqueous micelles and cooperates with solvatophobicity, leading to the formation of IL micelles. The 2D ROESY analysis reveals that the microstructures of Triton X-100-based micelles in ILs are not regular spherical, which accords with the FFTEM image. Similar to the aqueous micellar systems, the hydrophobic interaction or solvatophobicity was found to drive the formation of micelles.

Aggregation behavior of polyoxyethylene (20) sorbitan monolaurate (tween 20) in imidazolium based ionic liquids.

Surface tension measurements were carried out for the solutions of polyoxyethylene (20) sorbitan monolaurate (Tween 20) in 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF 4) and hexafluorophosphate (bmimPF 6) at various temperatures. Two transition points were found in the surface tension-concentration curves at each temperature. The freeze-fracture transmission electron microscopy revealed that two kinds of particles with different sizes are formed at the concentrations of each transition point. Thus, the surfactant concentrations of the two transition points are regarded as critical aggregation concentrations, CAC 1 and CAC 2. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of the aggregate formation, Delta G agg (0), Delta H agg (0), and Delta S agg (0). The thermodynamic parameters related to CAC 1 are almost independent of temperature. On the other hand, as for the aggregate formation at CAC 2, a positiveDelta S agg (0) contributes to a negative Delta G agg (0) at low temperature, while a negative Delta H agg (0) contributes to a negative Delta G agg (0) at high temperature. The behavior of the thermodynamic parameters as a function of temperature, combined with the variation of (1)H NMR chemical shifts of the bmim (+) protons as a function of the surfactant concentration, demonstrated that the aggregates formed at CAC 1 are nanodroplets of Tween 20 segregated from the solution phase, while those formed at CAC 2 are similar to the usual surfactant micelles formed in aqueous solution.

Aggregation behavior of a fluorinated surfactant in 1-butyl-3-methylimidazolium ionic liquids.

The aggregation behavior of a fluorinated surfactant (FC-4) was studied by surface tension measurements in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF 4]) and hexafluorophosphate ([bmim][PF 6]) at various temperatures. A series of surface properties, including adsorption efficiency (p C 20), effectiveness of surface tension reduction (Pi CAC), maximum surface excess concentration (Gamma max) and minimum surface area/molecule (A(min)) at the air-water interface were estimated. By comparing the fluorinated surfactant with traditional surfactants, we deduced that the surface activity of the fluorinated surfactant in ILs was superior to the activity of other surfactants. From the CAC values and their temperature dependence, we estimated the thermodynamic parameters of aggregate formation. The thermodynamic parameters indicate that the aggregate of FC-4 in [bmim][BF 4] is a traditional micelle, while the aggregate of FC-4 in [bmim][PF 6] is nanodroplets composed of FC-4 molecules segregated from the solution phase. These results were further confirmed by (1)H NMR measurements.

Aggregation Behavior of Pluronic Triblock Copolymer in 1-Butyl-3-methylimidazolium Type Ionic Liquids

Three amphiphilic poly(oxyethylene)-poly(oxypropylene)-poly(oxyethylene) ethers triblock copolymers, denoted Pluronic L61 (PEO3PPO30PEO3), Pluronic L64 (PEO13PPO30PEO13), and Pluronic F68 (PEO79PPO30PEO79) were shown to aggregate and form micelles in ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). The surface tension measurements revealed that the dissolution of the copolymers in ILs depressed the surface tension in a manner analogous to aqueous solutions. The cmcs of three triblock copolymers increase following the order of L61, L64, F68, suggesting that micellar formation was driven by solvatophobic effect. cmc and gamma cmc decrease with increasing temperature because hydrogen bonds between ILs and hydrophilic group of copolymers decrease and accordingly enhance the solvatophobic interaction. Micellar droplets of irregular shape with average size of 50 nm were observed. The thermodynamic parameters DeltaGm0, DeltaHm0, DeltaSm0 of the micellization of block copolymers in bmimBF4 and bmimPF6 were also calculated. It was revealed that the micellization is a process of entropy driving, which was further confirmed by isothermal titration calorimetry (ITC) measurements.

Chiral ionic liquid monolayer-stabilized gold nanoparticles: synthesis, self-assembly, and application to SERS.

Chiral ionic liquid monolayer-stabilized gold nanoparticles were synthesized in a two-phase liquid-liquid system and found to self-assemble into ringlike structures at the air/water interface. Control experiments with long-chain ILs revealed that the molecular structure of the CIL significantly affects the formation of the gold nanoparticle ring structures. A possible mechanism based on Marangoni-Bénard convection in evaporating droplets was proposed. These gold nanoparticle structures were shown to yield a large SERS enhancement for Rhodamine 6G.

Organic Solvents Induce the Formation of Oil-in-Ionic Liquid Microemulsion Aggregations

The role of four organic solvents in the formation process of 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) based ionic liquid (IL) microemulsions is investigated. The results showed that the addition of Triton X-100 remarkably decreased the conductivity of bmimBF4. The added organic solvents provided a strong apolar environment for the hydrophobic tails of Triton X-100 and caused the surfactant molecules to aggregate into the interfacial film of oil-in-bmimBF4 (O/IL) microemulsions. As a result, the conductivities of the solutions were initially increased because the insulative Triton X-100 molecules were assembled, which corresponded to increasing the concentration of continuous bmimBF4 solutions. The hydrophobic interaction between the dispersed organic solvents and the hydrophobic tails of Triton X-100 may be the driving force for the formation of O/IL microemulsions. The droplets of O/IL microemulsions were successively swollen by organic solvents, and a bicontinuous IL-containing microemulsion was observed by freeze-fracture transmission electron microscopy for the first time. The current study can help in further understanding the ILs-containing microemulsions and thereby improve microemulsion theory.

Lyotropic liquid crystalline phases formed in ternary mixtures of 1-cetyl-3-methylimidazolium bromide/p-xylene/water: a SAXS, POM, and rheology study.

The phase behavior of ternary mixtures of 1-cetyl-3-methylimidazolium bromide (C(16)mim-Br)/p-xylene/water is studied by small-angle X-ray scattering (SAXS), polarized optical microscopy (POM), and rheology measurements. Two types of lyotropic liquid crystalline phases are formed in the mixtures: hexagonal and lamellar. The structural parameters of the lyotropic liquid crystalline phases are calculated. Greater surfactant content in the sample leads to denser aggregation of the cylindrical units in the hexagonal liquid crystalline phase. The increase in lattice parameter and thickness of the water layer in lamellar phase are attributed to the increase of water content, and the area per surfactant molecule at the hydrophobic/hydrophilic interface for lamellar phase is found to be larger than that for hexagonal phase. The structural parameters of the liquid crystalline phases formed from the cetyltrimethylammonium bromide (CTAB) system are larger than those for the C(16)mim-Br system. The rheological properties of the samples are also found to be related to the structure of the liquid crystalline phases.

Microemulsions of N-alkylimidazolium ionic liquid and their performance as microreactors for the photocycloaddition of 9-substituted anthracenes.

The phase behavior of the ternary system consisting of an ionic liquid (1-tetradecyl-3-methylimidazolium bromide [C14mim]Br), p-xylene, and water were investigated. Depending on the composition of the ternary system, formation of hexagonal and lamellar liquid crystals as well as microemulsions was observed. 1H NMR spectroscopy study, 2D ROESY spectroscopic analysis, and rheological measurements of the microemulsions indicated that p-xylene is preferably located in the hydrophobic core and the palisade shells of the microemulsions. The sizes of the microemulsion droplets for the samples with water/[C14mim]Br ratio of 78:22 are measured by both dynamic light scattering (DLS) and transmission electron microscopy with the freeze-fracture technique (FF-TEM). Upon change of the mole ratio of the solubilized xylene to [C14mim]Br from 0 to 2.4, the diameters of the microemulsion droplets increase from ca. 20 to 90 nm and size distribution gets broad. These microemulsions can solubilize and preorientate anthracene derivatives with a polar 9-substituent, and thus may enhance the head-to-head cyclomers in the photocyclization of these substrates.

Patterns of gold nanoparticles formed at the air/water interface: effects of capping agents.

Gold nanoparticles stabilized with different capping agents were synthesized in a two-phase liquid-liquid system and found to self-assemble into various patterns at the air/water interface. The shapes of the patterns are closely related to the molecule structures of the capping agents. Systems with mixed capping agents were also investigated, and honeycomb patterns can be obtained in this way. T-shape and H-shape patterns were also observed. A possible mechanism based on Marangoni-Benard convection in evaporating droplets is proposed.