Xiulong Liu

Efficient Unknown Tag Identification Protocols in Large-Scale RFID Systems

Owing to its attractive features such as fast identification and relatively long interrogating range over the classical barcode systems, radio-frequency identification (RFID) technology possesses a promising prospect in many practical applications such as inventory control and supply chain management. However, unknown tags appear in RFID systems when the tagged objects are misplaced or unregistered tagged objects are moved in, which often causes huge economic losses. This paper addresses an important and challenging problem of unknown tag identification in large-scale RFID systems. The existing protocols leverage the Aloha-like schemes to distinguish the unknown tags from known tags at the slot level, which are of low time-efficiency, and thus can hardly satisfy the delay-sensitive applications. To fill in this gap, two filtering-based protocols (at the bit level) are proposed in this paper to address the problem of unknown tag identification efficiently. Theoretical analysis of the protocol parameters is performed to minimize the execution time of the proposed protocols. Extensive simulation experiments are conducted to evaluate the performance of the protocols. The results demonstrate that the proposed protocols significantly outperform the currently most promising protocols.

Completely Pinpointing the Missing RFID Tags in a Time-Efficient Way

Radio Frequency Identification (RFID) technology has been widely used in inventory management in many scenarios, e.g., warehouses, retail stores, hospitals, etc. This paper investigates a challenging problem of complete identification of missing tags in large-scale RFID systems. Although this problem has attracted extensive attention from academy and industry, the existing work can hardly satisfy the stringent real-time requirements. In this paper, a Slot Filter-based Missing Tag Identification (SFMTI) protocol is proposed to reconcile some expected collision slots into singleton slots and filter out the expected empty slots as well as the unreconcilable collision slots, thereby achieving the improved time-efficiency. The theoretical analysis is conducted to minimize the execution time of the proposed SFMTI. We then propose a cost-effective method to extend SFMTI to the multi-reader scenarios. The extensive simulation experiments and performance results demonstrate that the proposed SFMTI protocol outperforms the most promising Iterative ID-free Protocol (IIP) by reducing nearly 45% of the required execution time, and is just within a factor of 1.18 from the lower bound of the minimum execution time.

A Multiple Hashing Approach to Complete Identification of Missing RFID Tags

Owing to its superior properties, such as fast identification and relatively long interrogating range over barcode systems, Radio Frequency Identification (RFID) technology has promising application prospects in inventory management. This paper studies the problem of complete identification of missing RFID tag, which is important in practice. Time efficiency is the key performance metric of missing tag identification. However, the existing protocols are ineffective in terms of execution time and can hardly satisfy the requirements of realtime applications. In this paper, a Multi-hashing based Missing Tag Identification (MMTI) protocol is proposed, which achieves better time efficiency by improving the utilization of the time frame used for identification. Specifically, the reader recursively sends bitmaps that reflect the current slot occupation state to guide the slot selection of the next hashing process, thereby changing more empty or collision slots to the expected singleton slots. We investigate the optimal parameter settings to maximize the performance of the MMTI protocol. Furthermore, we discuss the case of channel error and propose the countermeasures to make the MMTI workable in the scenarios with imperfect communication channels. Extensive simulation experiments are conducted to evaluate the performance of MMTI, and the results demonstrate that this new protocol significantly outperforms other related protocols reported in the current literature.

RFID cardinality estimation with blocker tags

The widely used RFID tags impose serious privacy concerns as a tag responds to queries from readers no matter they are authorized or not. The common solution is to use a commercially available blocker tag which behaves as if a set of tags with known blocking IDs are present. The use of blocker tags makes RFID estimation much more challenging as some genuine tag IDs are covered by the blocker tag and some are not. In this paper, we propose REB, the first RFID estimation scheme with the presence of blocker tags. REB uses the framed slotted Aloha protocol specified in the C1G2 standard. For each round of the Aloha protocol, REB first executes the protocol on the genuine tags and the blocker tag, and then virtually executes the protocol on the known blocking IDs using the same Aloha protocol parameters. The basic idea of REB is to conduct statistically inference from the two sets of responses and estimate the number of genuine tags. We conduct extensive simulations to evaluate the performance of REB, in terms of time-efficiency and estimation reliability. The experimental results reveal that our REB scheme runs tens of times faster than the fastest identification protocol with the same accuracy requirement.

Sampling Bloom Filter-Based Detection of Unknown RFID Tags

Unknown RFID tags appear when the unread tagged objects are moved in or tagged objects are misplaced. This paper studies the practically important problem of unknown tag detection while taking both time-efficiency and energy-efficiency of battery-powered active tags into consideration. We first propose a Sampling Bloom Filter which generalizes the standard Bloom Filter. Using the new filtering technique, we propose the Sampling Bloom Filter-based Unknown tag Detection Protocol (SBF-UDP), whose detection accuracy is tunable by the end users. We present the theoretical analysis to minimize the time and energy costs. SBF-UDP can be tuned to either the time-saving mode or the energy-saving mode, according to the specific requirements. Extensive simulations are conducted to evaluate the performance of the proposed protocol. The experimental results show that SBF-UDP considerably outperforms the previous related protocols in terms of both time-efficiency and energy-efficiency. For example, when 3 or more unknown tags appear in the RFID system with 30000 known tags, the proposed SBF-UDP is able to successfully report the existence of unknown tags with a confidence more than 99%. While our protocol runs 9 times faster than the fastest existing scheme and reducing the energy consumption by more than 80%.

Fast Tracking the Population of Key Tags in Large-Scale Anonymous RFID Systems

In large-scale radio frequency identification (RFID)-enabled applications, we sometimes only pay attention to a small set of key tags, instead of all. This paper studies the problem of key tag population tracking, which aims at estimating how many key tags in a given set exist in the current RFID system and how many of them are absent. Previous work is slow to solve this problem due to the serious interference replies from a large number of ordinary (i.e., non-key) tags. However, time-efficiency is a crucial metric to the studied key tag tracking problem. In this paper, we propose a singleton slot-based estimator, which is time-efficient, because the RFID reader only needs to observe the status change of expected singleton slots corresponding to key tags instead of the whole time frame. In practice, the ratio of key tags to all current tags is small, because key members are usually rare. As a result, even when the whole time frame is long, the number of expected singleton slots is limited and the running of our protocol is very fast. To obtain good scalability in large-scale RFID systems, we exploit the sampling idea in the estimation process. A rigorous theoretical analysis shows that the proposed protocol can provide guaranteed estimation accuracy to end users. Extensive simulation results demonstrate that our scheme outperforms the prior protocols by significantly reducing the time cost.

Top-k queries for multi-category RFID systems

This paper studies the practically important problem of top-k queries, which is to find the top k largest categories and their corresponding sizes. In this paper, we propose a Top-k Query (TKQ) protocol and a technique that we call Segmented Perfect Hashing (SPH) for optimizing TKQ. Specifically, TKQ is based on the framed slotted Aloha protocol. Each tag responds to the reader with a Single-One Geometric (SOG) string using the ON-OFF Keying modulation. TKQ leverages the length of continuous leading 1s in the combined signal to estimate the corresponding category size. TKQ can quickly eliminate the sufficiently small categories, and only needs to focus on a limited number of large-size categories that require more accurate estimation. We conduct rigorous analysis to guarantee the predefined accuracy constraints. To further improve time-efficiency, we propose the SPH scheme, which improves the average frame utilization of TKQ from 36.8% to nearly 100% by establishing a bijective mapping between tag categories and slots. To minimize the overall time cost, we optimize the key parameter that trades off between communication cost and computation cost. Experimental results show that our TKQ+SPH protocol not only achieves the required accuracy constraints, but also achieves a 2.6~7x faster speed than the existing protocols.

RFID Estimation With Blocker Tags

With the increasing popularization of radio frequency identification (RFID) technology in the retail and logistics industry, RFID privacy concern has attracted much attention, because a tag responds to queries from readers no matter they are authorized or not. An effective solution is to use a commercially available blocker tag that behaves as if a set of tags with known blocking IDs are present. However, the use of blocker tags makes the classical RFID estimation problem much more challenging, as some genuine tag IDs are covered by the blocker tag and some are not. In this paper, we propose RFID estimation scheme with blocker tags (REB), the first RFID estimation scheme with the presence of blocker tags. REB uses the framed slotted Aloha protocol specified in the EPC C1G2 standard. For each round of the Aloha protocol, REB first executes the protocol on the genuine tags and the blocker tag, and then virtually executes the protocol on the known blocking IDs using the same Aloha protocol parameters. REB conducts statistical inference from the two sets of responses and estimates the number of genuine tags. Rigorous theoretical analysis of parameter settings is proposed to guarantee the required estimation accuracy, meanwhile minimizing the time cost and energy cost of REB. We also reveal a fundamental tradeoff between the time cost and energy cost of REB, which can be flexibly adjusted by the users according to the practical requirements. Extensive experimental results reveal that REB significantly outperforms the state-of-the-art identification protocols in terms of both time efficiency and energy efficiency.

Multi-Category RFID Estimation

This paper concerns the practically important problem of multi-category radio frequency identification (RFID) estimation: given a set of RFID tags, we want to quickly and accurately estimate the number of tags in each category. However, almost all the existing RFID estimation protocols are dedicated to the estimation problem on a single set, regardless of tag categories. A feasible solution is to separately execute the existing estimation protocols on each category. The execution time of such a serial solution is proportional to the number of categories, and cannot satisfy the delay-stringent application scenarios. Simultaneous RIFD estimation over multiple categories is desirable, and hence, this paper proposes an approach called simultaneous estimation for multi-category RFID systems (SEM). SEM exploits the Manchester-coding mechanism, which is supported by the ISO 18000-6 RFID standard, to decode the combined signals, thereby simultaneously obtaining the reply status of tags from each category. As a result, multiple bit vectors are decoded from just one physical slotted frame. Built on our SEM, many existing excellent estimation protocols can be used to estimate the tag cardinality of each category in a simultaneous manner. To ensure the predefined accuracy, we calculate the variance of the estimate in one round, as well as the variance of the average estimate in multiple rounds. To find the optimal frame size, we propose an efficient binary search-based algorithm. To address significant variance in category sizes, we propose an adaptive partitioning (AP) strategy to group categories of similar sizes together and execute the estimation protocol for each group separately. Compared with the existing protocols, our approach is much faster, meanwhile satisfying the predefined estimation accuracy. For example, with 20 categories, the proposed SEM+AP is about seven times faster than prior estimation schemes. Moreover, our approach is the only one whose normalized estimation time (i.e., time per category) decreases as the number of categories increases.

Efficient Detection of Cloned Attacks for Large-Scale RFID Systems

This paper studies a practically important problem of cloned tag detection in large-scale RFID systems where an attacker compromises genuine tags and produces their replicas, namely cloned tags, to threaten RFID applications. Although many efforts have been made to address this problem, the existing work can hardly satisfy the stringent real-time requirement, and thus cannot catch cloning attacks in a time-efficient way. Moreover, the existing work does not consider energy-efficiency, which is very critical when battery-powered active tags are used. To fill these gaps, this paper proposes a Location Polling-based Cloned tag Detection (LP-CTD) protocol by taking both time-efficiency and energy-efficiency into consideration. LP-CTD reports the existence of cloned tags when the reader finds an expected singleton slot appearing as collision one. To improve the efficiency of detecting cloned tags, only sampled tags in LP-CTD participate in the detection process. Theoretical analysis on the proposed protocol is conducted to minimize their execution time and energy consumption. Extensive simulation experiments are conducted to evaluate the performance of the proposed protocols. The results demonstrate that the proposed LP-CTD protocol considerably outperforms the latest related protocols by reducing more than 80% of the execution time, and more than 90% of the energy consumption.