Xu-Bing Li

Graphdiyne: A Metal-Free Material as Hole Transfer Layer To Fabricate Quantum Dot-Sensitized Photocathodes for Hydrogen Production

Graphdiyne (GDY), a novel large π-conjugated carbon material, for the first time, is introduced as the hole transfer layer into a photoelectrochemical water splitting cell (PEC). Raman and ultraviolet photoelectron spectroscopic studies indicate the existence of relatively strong π-π interactions between GDY and 4-mercaptopyridine surface-functionalized CdSe quantum dots, beneficial to the hole transportation and enhancement of the photocurrent performance. Upon exposure to a Xe lamp, the integrated photocathode produces a current density of nearly -70 μA cm(-2) at a potential of 0 V vs NHE in neutral aqueous solution. Simultaneously, the photocathode evolves H2 with 90 ± 5% faradic efficiency over three times and exhibits good stability within 12 h. All of the results indicate that GDY is a promising hole transfer material to fabricate a PEC device for water splitting by solar energy.

Mechanistic Insights into the Interface‐Directed Transformation of Thiols into Disulfides and Molecular Hydrogen by Visible‐Light Irradiation of Quantum Dots

Quantum dots (QDs) offer new and versatile ways to harvest light energy. However, there are few examples involving the utilization of QDs in organic synthesis. Visible-light irradiation of CdSe QDs was found to result in virtually quantitative coupling of a variety of thiols to give disulfides and H2 without the need for sacrificial reagents or external oxidants. The addition of small amounts of nickel(II) salts dramatically improved the efficiency and conversion through facilitating the formation of hydrogen atoms, thereby leading to faster regeneration of the ground-state QDs. Mechanistic studies reveal that the coupling reaction occurs on the QD surfaces rather than in solution and offer a blueprint for how these QDs may be used in other photocatalytic applications. Because no sacrificial agent or oxidant is necessary and the catalyst is reusable, this method may be useful for the formation of disulfide bonds in proteins as well as in other systems sensitive to the presence of oxidants.

Chitosan confinement enhances hydrogen photogeneration from a mimic of the diiron subsite of [FeFe]-hydrogenase

Nature has created [FeFe]-hydrogenase enzyme as a hydrogen-forming catalyst with a high turnover rate. However, it does not meet the demands of economically usable catalytic agents because of its limited stability and the cost of its production and purification. Synthetic chemistry has allowed the preparation of remarkably close mimics of [FeFe]-hydrogenase but so far failed to reproduce its catalytic activity. Most models of the active site represent mimics of the inorganic cofactor only, and the enzyme-like reaction that proceeds within restricted environments is less well understood. Here we report that chitosan, a natural polysaccharide, improves the efficiency and durability of a typical mimic of the diiron subsite of [FeFe]-hydrogenase for photocatalytic hydrogen evolution. The turnover number of the self-assembling system increases ~4,000-fold compared with the same system in the absence of chitosan. Such significant improvements to the activity and stability of artificial [FeFe]-hydrogenase-like systems have, to our knowledge, not been reported to date.

An Exceptional Artificial Photocatalyst, Nih‐CdSe/CdS Core/Shell Hybrid, Made In Situ from CdSe Quantum Dots and Nickel Salts for Efficient Hydrogen Evolution

A novel hybrid Nih -CdSe/CdS core/shell quantum dot is a simple and exceptional artificial photocatalyst for H2 production from 2-propanol aqueous solution. Studies on the nature of the artificial photocatalyst and mechanism for H2 production demonstrate that the synthetic strategy is general and the artificial photocatalyst holds promise for light capture, electron transfer, and catalysis at the surface of the Nih -CdSe/CdS core/shell quantum dots, leading to a self-healing system for H2 evolution in harmony.

Cross-coupling hydrogen evolution reaction in homogeneous solution without noble metals.

A highly efficient noble-metal-free homogeneous system for a cross-coupling hydrogen evolution (CCHE) reaction is developed. With cheap, earth-abundant eosin Y and molecular catalyst Co(dmgH)2Cl2, good to excellent yields for coupling reactions with a variety of isoquinolines and indole substrates and H2 have been achieved without any sacrificial oxidants. Mechanistic insights provide rich information on the effective, clean, and economic CCHE reaction.

A robust “artificial catalyst” in situ formed from CdTe QDs and inorganic cobalt salts for photocatalytic hydrogen evolution

A simple hollow-structured “artificial catalyst” in situ formed from CdTe QDs and CoCl2·6H2O in aqueous ascorbic acid solution has shown exceptional activity and stability for photocatalytic H2 evolution (25 μmol h−1 mg−1, 219 100 mol H2 per mol QDs or 59 600 mol H2 per mol Co turnovers, respectively) under visible light irradiation for 70 h.

A solution-processed, mercaptoacetic acid-engineered CdSe quantum dot photocathode for efficient hydrogen production under visible light irradiation

We describe here a simple, efficient and stable CdSe QDs/NiO photocathode engineered using a molecular linker, mercaptoacetic acid (MAA), for H2 generation from neutral water. This protocol does not require any sacrificial reagent, external cocatalyst, protecting layer and buffer solution as well. Upon visible-light irradiation, photocurrent as high as −60 μA cm−2 is achieved at a bias of −0.1 V vs. NHE in 0.1 M Na2SO4 (pH 6.8). Simultaneously, the photocathode evolves H2 consistently for 45 h with ∼100% Faradic efficiency, which is unprecedented in the field of sensitized photocathodes for H2 production. A mechanistic study reveals that the exceptional performance is derived from the efficient hole transfer process.

Organogelators based on TTF supramolecular assemblies: synthesis, characterization, and conductive property.

A closely related family of organogelators 1-2 appended one or two electroactive tetrathiafulvalene (TTF) residues, has been designed and readily synthesized by Sonogashira reactions. These compounds can gelate a variety of organic solvents in view of multiple intermolecular interactions, and compounds 2 with two TTF subunits exhibit higher gelation ability than their corresponding 1. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigation of the xerogels from toluene gave a visual image showing that fibrillar aggregates are entangled in three-dimensional network structures. The columnar TTF cores stacking in the fiber, evidenced by the mixed-valence states absorption at around 2000 nm in ultraviolet-visible-near-infrared (UV-vis-NIR) spectra, provide an efficient pathway for the electron conduction. Upon oxidized by iodine, these xerogels exhibit semiconductive behaviors with moderate levels of conductivity. Additionally, the electrical conductivity of doped-xerogels 2 is 1 order of magnitude higher than that of 1 under identical conditions.

Self-Assembled Framework Enhances Electronic Communication of Ultrasmall-Sized Nanoparticles for Exceptional Solar Hydrogen Evolution

Colloidal quantum dots (QDs) have demonstrated great promise in artificial photosynthesis. However, the ultrasmall size hinders its controllable and effective interaction with cocatalysts. To improve the poor interparticle electronic communication between free QD and cocatalyst, we design here a self-assembled architecture of nanoparticles, QDs and Pt nanoparticles, simply jointed together by molecular polyacrylate to greatly enhance the rate and efficiency of interfacial electron transfer (ET). The enhanced interparticle electronic communication is confirmed by femtosecond transient absorption spectroscopy and X-ray transient absorption. Taking advantage of the enhanced interparticle ET with a time scale of ∼65 ps, 5.0 mL of assembled CdSe/CdS QDs/cocatalysts solution produces 94 ± 1.5 mL (4183 ± 67 μmol) of molecular H2 in 8 h, giving rise to an internal quantum yield of ∼65% in the first 30 min and a total turnover number of >1.64 × 107 per Pt nanoparticle. This study demonstrates that self-assembly is a promising way to improve the sluggish kinetics of the interparticle ET process, which is the key step for advanced H2 photosynthesis.

Photocatalytic hydrogen evolution from glycerol and water over nickel-hybrid cadmium sulfide quantum dots under visible-light irradiation.

Natural photosynthesis offers the concept of storing sunlight in chemical form as hydrogen (H2), using biomass and water. Herein we describe a robust artificial photocatalyst, nickel-hybrid CdS quantum dots (Nih-CdS QDs) made in situ from nickel salts and CdS QDs stabilized by 3-mercaptopropionic acid, for visible-light-driven H2 evolution from glycerol and water. With visible light irradiation for 20 h, 403.2 μmol of H2 was obtained with a high H2 evolution rate of approximately 74.6 μmol h(-1)  mg(-1) and a high turnover number of 38 405 compared to MPA-CdS QDs (mercaptopropionic-acid-stabilized CdS quantum dots). Compared to CdTe QDs and CdSe QDs, the modified CdS QDs show the greatest affinity toward Ni(2+) ions and the highest activity for H2 evolution. X-ray photoelectron spectroscopy (XPS), inductively-coupled plasma atomic emission spectrometry (ICP-AES), and photophysical studies reveal the chemical nature of the Nih-CdS QDs. Electron paramagnetic resonance (EPR) and terephthalate fluorescence measurements clearly demonstrate water splitting to generate ⋅OH radicals. The detection of DMPO-H and DMPO-C radicals adduct in EPR also indicate that ⋅H radicals and ⋅C radicals are the active species in the catalytic cycle.