Xueying Ding

Second-generation aptamer-conjugated PSMA-targeted delivery system for prostate cancer therapy

Background: miR-15a and miR-16-1 have been identified as tumor suppressor genes in prostate cancer, but their safe and effective delivery to target cells is key to the successful use of this therapeutic strategy. RNA aptamer A10 has been used as a ligand, targeting prostate cancer cells that express prostate-specific membrane antigen (PSMA). Compared with A10, the binding of the second-generation RNA aptamer, A10-3.2, to PSMA is more efficient. Methods: A10-3.2 was investigated as a PSMA-targeting ligand in the design of a polyamidoamine (PAMAM)-based microRNA (miR-15a and miR-16-1) vector to prostate cancer cells. Using polyethyleneglycol (PEG) as a spacer, PAMAM was conjugated to aptamer (PAMAM-PEG-APT) and used as a vehicle for miRNA target delivery. Results: Luciferase assays of pGL-3 expression against PC3 (PSMA−) and LNCaP (PSMA+) cells demonstrated that the transfection efficiency of the synthesized DNA/PAMAM-PEG-APT complex was higher than that of the DNA/PAMAM-PEG complex. In addition, cell viability assays of LNCaP (PSMA+) cells showed that, with a N/P ratio of 15:1, the IC50 value of miRNA/PAMAM-PEG-APT was approximately 4.7-fold lower than that of miRNA/PAMAM-PEG. Conclusion: This PSMA-targeted system may prove useful in widening the therapeutic window and allow for selective killing of prostate cancer cells.

Penetration and distribution of PLGA nanoparticles in the human skin treated with microneedles.

This study was designed to investigate the penetration and the distribution of poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles in the human skin treated with microneedles. Fluorescent nanoparticles were prepared to indicate the transdermal transport process of the nanoparticles. Permeation study was performed on Franz-type diffusion cells in vitro. The distribution of nanoparticles was visualized by confocal laser scanning microscopy (CLSM) and quantified by high performance liquid chromatography (HPLC). CLSM images showed that nanoparticles were delivered into the microconduits created by microneedles and permeated into the epidermis and the dermis. The quantitative determination showed that (i) the permeation of nanoparticles into the skin was enhanced by microneedles, but no nanoparticle reached the receptor solution; (ii) much more nanoparticles deposited in the epidermis than those in the dermis; (iii) the permeation was in a particle size-dependent manner; and (iv) the permeation increased with the nanoparticle concentration increasing until a limit value was reached. These results suggested that microneedles could enhance the intradermal delivery of PLGA nanoparticles. The biodegradable nanoparticles would sustain drug release in the skin and supply the skin with drug over a prolonged period. This strategy would prove to be useful for topical drug administration.

A thermo-sensitive PLGA-PEG-PLGA hydrogel for sustained release of docetaxel

The aim of this study was to investigate the suitability of poly-(d,l-lactic acid-co-glycolic acid) (PLGA)-polyethylene glycol (PEG)-PLGA triblock copolymer as a matrix material for a sustained-release system for docetaxel (DTX). The copolymers were synthesized by ring-opening polymerization reaction and characterized by 1H-NMR and gel permeation chromatography. The DTX-loaded formulations were prepared, characterized. And the antitumor efficacy and the pharmacokinetics of DTX-loaded copolymer on A-549 lung tumor-bearing BALB/cA mice were investigated. The results showed that DTX-loaded copolymer highly increased the solubility of DTX by more than 3000-fold. And copolymer concentration as well as drug loading level exerted appreciable influence on the drug release behavior. Further, the pharmacokinetic test showed that DTX-loaded copolymer could be with the sustained-release nature for over 3 weeks, which correlated well with the in vitro release. Additionally, one intratumoral injection of the thermo-sensitive hydrogel containing DTX was comparable to three intravenous injections of DTX injection in inhibiting the tumor growth in A-549 lung tumor-bearing BALB/cA mice with a less toxic manner. PLGA-PEG-PLGA could thus provide a promising alternate locally delivered vehicle for DTX to achieve prolonged exposure having greater efficacy in inhibiting tumor growth with lower toxicity.

Degradable gene delivery systems based on Pluronics-modified low-molecular-weight polyethylenimine: preparation, characterization, intracellular trafficking, and cellular distribution

Background Cationic copolymers consisting of polycations linked to nonionic amphiphilic block polymers have been evaluated as nonviral gene delivery systems, and a large number of different polymers and copolymers of linear, branched, and dendrimeric architectures have been tested in terms of their suitability and efficacy for in vitro and in vivo transfection. However, the discovery of new potent materials still largely relies on empiric approaches rather than a rational design. The authors investigated the relationship between the polymers’ structures and their biological performance, including DNA compaction, toxicity, transfection efficiency, and the effect of cellular uptake. Methods This article reports the synthesis and characterization of a series of cationic copolymers obtained by grafting polyethyleneimine with nonionic amphiphilic surfactant polyether-Pluronic® consisting of hydrophilic ethylene oxide and hydrophobic propylene oxide blocks. Transgene expression, cytotoxicity, localization of plasmids, and cellular uptake of these copolymers were evaluated following in vitro transfection of HeLa cell lines with various individual components of the copolymers. Results Pluronics can exhibit biological activity including effects on enhancing DNA cellular uptake, nuclear translocation, and gene expression. The Pluronics with a higher hydrophilic-lipophilic balance value lead to homogeneous distribution in the cytoplasm; those with a lower hydrophilic-lipophilic balance value prefer to localize in the nucleus. Conclusion This Pluronic-polyethyleneimine system may be worth exploring as components in the cationic copolymers as the DNA or small interfering RNA/microRNA delivery system in the near future.

Anti-DR5 monoclonal antibody-mediated DTIC-loaded nanoparticles combining chemotherapy and immunotherapy for malignant melanoma: target formulation development and in vitro anticancer activity

Background The increased incidence of malignant melanoma in recent decades, along with its high mortality rate and pronounced resistance to therapy pose an enormous challenge. Novel therapeutic strategies, such as immunotherapy and targeted therapy, are urgently needed for melanoma. In this study, a new active targeting drug delivery system was constructed to combine chemotherapy and active specific immunotherapy. Methods The chemotherapeutic drug, dacarbazine (DTIC), that induces apoptosis through the intrinsic pathway which typically responds to severe DNA damage, was used as a model drug to prepare DTIC-loaded polylactic acid (PLA) nanoparticles (DTIC-NPs), which were covalently conjugated to a highly specific targeting functional TRAIL-receptor 2 (DR5) monoclonal antibody (mAb) that can contribute directly to cancer cell apoptosis or growth inhibition through the extrinsic pathway. Results Our in vitro experiments demonstrated that DTIC-PLA-DR5 mAb nanoparticles (DTIC-NPs-DR5 mAb) are an active targeting drug delivery system which can specifically target DR5-overexpressing malignant melanoma cells and become efficiently internalized. Most strikingly, compared with conventional DTIC-NPs, DTIC-NPs-DR5 mAb showed significantly enhanced cytotoxicity and increased cell apoptosis in DR5-positive malignant melanoma cells. Conclusion The DTIC-NPs-DR5 mAb described in this paper might be a potential formulation for targeting chemotherapy and immunotherapy to DR5-overexpressing metastatic melanoma.

Effects of penetration enhancers on Shuangwu traumatic formula: In vitro percutaneous absorption and in vivo pharmacodynamic evaluation of an herb medicine

The purposes of this study were to improve the transdermal permeation of the Shangwu traumatic formula by chemical penetration enhancers and to investigate the pharmacodynamic changes of the formula caused by incorporated enhancers. The effects of different enhancers on the transdermal absorption of piperine, the representative component of formula, were investigated by in vitro permeation studies. The tests showed an increasing enhancement effect in the following order: Azone/N-methylpyrrolidone (NMP) > oleic acid > Azone/peppermint oil > Azone/oleic acid > Azone/propylene glycol > Azone > peppermint oil > NMP > propylene glycol. The ratio and the content of the most effective enhancer Azone/NMP were determined subsequently. The results suggested that the most significant penetration enhancement was achieved by 3% (w/w) Azone/NMP (3:7). Furthermore, the in vivo pharmacodynamic responses of the formula suspension with or without Azone/NMP were compared using hot-plate assay and xylene-induced ears edema test as models. The data indicated that the formula had positive effect on analgesis and anti-inflammatory, which can be enhanced with the addition of enhancers.

Dry powder inhalations containing thymopentin and its immunomodulating effects in Wistar rats

Thymopentin (TP5), a synthetic pentapeptide, has been used in clinic as a modulator for immunodeficiences through intramuscular administration. The purpose of this study was to design and evaluate dry powder inhalations (DPIs) for pulmonary delivery of TP5. Dry powder inhalations containing leucine (a dispersibility enhancer), mannitol, and lactose (bulking agents) were prepared by spray-drying from aqueous formulations. The formulation components on the aerosolisation characteristics of spray-dried powders were investigated through the use of various amount of leucine, lactose and mannitol. Following spray-drying, resultant powders were characterized using scanning electron microscopy, laser diffraction and tapped density measurements, and the aerosolisation performance was determined using Twin Stage Impinger. The immunosuppression Wistar rats model was constructed to evaluate the immunomodulating effects of TP5 DPIs in vivo. The results of T-lymphocyte subsets (CD3+, CD4+, CD8+, CD4+/CD8+ ratio) analyses suggest that TP5 DPIs have modulating effects. On an overall evaluation, TP5 pulmonary delivery DPIs may be feasible for the future clinical application.

Study on the prostate cancer-targeting mechanism of aptamer-modified nanoparticles and their potential anticancer effect in vivo

Ligand-mediated prostate cancer (PCa)-targeting gene delivery is one of the focuses of research in recent years. Our previous study reported the successful preparation of aptamer-modified nanoparticles (APT-NPs) in our laboratory and demonstrated their PCa-targeting ability in vitro. However, the mechanism underlying this PCa-targeting effect and their anticancer ability in vivo have not yet been elucidated. The objective of this study was to assess the feasibility of using APT-NPs to deliver micro RNA (miRNA) systemically to PCa cells, to testify their tumor-targeting efficiency, and to observe their biodistribution after systemic administration to a xenograft mouse model of PCa. In addition, the effect of APT depletion and endocytosis inhibitors on cellular uptake was also evaluated quantitatively in LNCaP cells to explore the internalization mechanism of APT-NPs. Finally, blood chemistry, and renal and liver function parameters were measured in the xenograft mouse model of PCa to see whether APT-NPs had any demonstrable toxicity in mice in vivo. The results showed that APT-NPs prolonged the survival duration of the PCa tumor-bearing mice as compared with the unmodified NPs. In addition, they had a potential PCa-targeting effect in vivo. In conclusion, this research provides a prototype for the safe and efficient delivery of miRNA expression vectors to PCa cells, which may prove useful for preclinical and clinical studies on the treatment of PCa.

A novel ropivacaine-loaded in situ forming implant prolongs the effect of local analgesia in rats

Introduction Prolonged postoperative analgesia cannot be achieved by a single injection of local anesthetic solution. The objective of this study was to optimize the formulation of a ropivacaine hydrochloride (Ropi-HCl) loaded in situ forming implant (ISI) by addition of different co-solvents, and evaluate the in vitro release of Ropi-HCl, and the analgesic effect and toxicity of the optimized formulation in rats. Material and methods Triacetin (TA), benzyl benzoate (BB) and polyethylene glycol 400 (PEG 400) were used as additives and added to the solvent of N-methyl-2-pyrrolidone (NMP). Drug release to the surface and inner structural properties of the formed implant were evaluated by scanning electron microscopy (SEM). The analgesic effect was determined by injection near the rat sciatic nerve. Results The solvent system added with TA or BB significantly decreased the burst release, whereas PEG 400 increased the Ropi-HCl burst release from the formulation. Over 70% of the incorporated Ropi-HCl was released from all formulations in 14 days in the in vitro assay. The SEM showed that the surface of NMP-BB formulation was less porous and more homogeneous, compared with the other formulations. Compared with Ropi-HCl injection, the optimized formulation (NMP-BB) significantly prolonged the analgesic effect in 48 h (p < 0.05), with a mild degree of motor block from 3 h to 12 h. Histological evaluation of the injection site revealed only mild inflammatory infiltration without obvious pathological nerve alterations. Conclusions The biodegradable Ropi-HCl-loaded ISI system with NMP-BB may prove to be an attractive and safe alternative for the delivery of parenteral local anesthetics to prolong pain relief.

Surface modification with pluronic P123 enhances transfection efficiency of PAMAM dendrimer

AbstractTo improve gene delivery efficiency and decrease cytotoxicity of polyamidoamine (PAMAM) polymers, P123-g-PAMAM was synthesized by modifying PAMAM with pluronic P123. The structure of the synthesized polymers was analyzed using proton nuclear magnetic resonance. The polymers were able to self-assemble with DNA, forming nanometer-scale complexes. Particle size measurement confirmed that the mean diameter of the polyplexes was 100–250 nm. The cytotoxicity and transfer efficiency were measured and compared with those of PEI and PAMAM. All of the polyplexes showed significantly low cytotoxicity in the MCF-7, HepG2, and 293T cell lines. In addition, the low level of P123 grafting to PAMAM showed significantly higher transfection efficiency than unmodified PAMAM at the optimal N/P ratio. These results suggest that P123-ylated PAMAM may prove as a useful carrier for gene delivery.