Xun Hong

One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low-cost and earth-abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition-metal dichalcogenides (TMDs) showed outstanding performance as co-catalysts for the hydrogen evolution reaction (HER), designing TMD-hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one-pot wet-chemical method is developed to prepare MS2-CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single-layer MS2 nanosheets with lateral size of 4-10 nm selectively grow on the Cd-rich (0001) surface of wurtzite CdS nanocrystals. These MS2-CdS nanohybrids possess a large number of edge sites in the MS2 layers, which are active sites for the HER. The photocatalytic performances of WS2-CdS and MoS2-CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS2-CdS nanohybrids showed enhanced stability after a long-time test (16 h), and 70% of catalytic activity still remained.

Single Cobalt Atoms with Precise N‐Coordination as Superior Oxygen Reduction Reaction Catalysts

A new strategy for achieving stable Co single atoms (SAs) on nitrogen-doped porous carbon with high metal loading over 4 wt % is reported. The strategy is based on a pyrolysis process of predesigned bimetallic Zn/Co metal-organic frameworks, during which Co can be reduced by carbonization of the organic linker and Zn is selectively evaporated away at high temperatures above 800 °C. The spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurements both confirm the atomic dispersion of Co atoms stabilized by as-generated N-doped porous carbon. Surprisingly, the obtained Co-Nx single sites exhibit superior ORR performance with a half-wave potential (0.881 V) that is more positive than commercial Pt/C (0.811 V) and most reported non-precious metal catalysts. Durability tests revealed that the Co single atoms exhibit outstanding chemical stability during electrocatalysis and thermal stability that resists sintering at 900 °C. Our findings open up a new routine for general and practical synthesis of a variety of materials bearing single atoms, which could facilitate new discoveries at the atomic scale in condensed materials.

Hollow Zn/Co ZIF Particles Derived from Core–Shell ZIF‐67@ZIF‐8 as Selective Catalyst for the Semi‐Hydrogenation of Acetylene

The rational design of metal-organic frameworks (MOFs) with hollow features and tunable porosity at the nanoscale can enhance their intrinsic properties and stimulates increasing attentions. In this Communication, we demonstrate that methanol can affect the coordination mode of ZIF-67 in the presence of Co(2+) and induces a mild phase transformation under solvothermal conditions. By applying this transformation process to the ZIF-67@ZIF-8 core-shell structures, a well-defined hollow Zn/Co ZIF rhombic dodecahedron can be obtained. The manufacturing of hollow MOFs enables us to prepare a noble metal@MOF yolk-shell composite with controlled spatial distribution and morphology. The enhanced gas storage and porous confinement that originate from the hollow interior and coating of ZIF-8 confers this unique catalyst with superior activity and selectivity toward the semi-hydrogenation of acetylene.

Single-crystalline octahedral Au-Ag nanoframes.

We report the formation of single-crystalline octahedral Au-Ag nanoframes by a modified galvanic replacement reaction. Upon sequential addition of AgNO(3), CuCl, and HAuCl(4) to octadecylamine solution, truncated polyhedral silver nanoparticles formed first and then changed into octahedral Au-Ag nanoframes, without requiring a conventional Ag removal step with additional oxidation etchant. The nanoframes have 12 sides, and all of the eight {111} faces are empty. The side grows along the [110] direction, and the diameter is less than 10 nm. The selective gold deposition on the high-energy (110) surface, the diffusion, and the selective redeposition of Au and Ag atoms are the key reasons for the formation of octahedral nanoframes.

Ultrathin Icosahedral Pt-Enriched Nanocage with Excellent Oxygen Reduction Reaction Activity

Cost-efficient utilization of Pt in the oxygen reduction reaction (ORR) is of great importance for the potential industrial scale demand of proton-exchange membrane fuel cells. Designing a hollow structure of a Pt catalyst offers a great opportunity to enhance the electrocatalytic performance and maximize the use of precious Pt. Herein we report a routine to synthesize ultrathin icosahedral Pt-enriched nanocages. In detail, the Pt atoms were conformally deposited on the surface of Pd icosahedral seeds, followed by selective removal of the Pd core by a concentrated HNO3 solution. The icosahedral Pt-enriched nanocage that is a few atomic layers thick includes the merits of abundant twin defects, an ultrahigh surface/volume ratio, and an ORR-favored Pt{111} facet, all of which have been demonstrated to be promoting factors for ORR. With a 10 times higher specific activity and 7 times higher mass activity, this catalyst shows more extraordinary ORR activity than the commercial Pt/C. The ORR activity of icosahedral Pt-enriched nanocages outperforms the cubic and octahedral nanocages reported in the literature, demonstrating the superiority of the icosahedral nanocage structure.

Porous Molybdenum Phosphide Nano-Octahedrons Derived from Confined Phosphorization in UIO-66 for Efficient Hydrogen Evolution

Herein, a series of porous nano-structured carbocatalysts have been fused and decorated by Mo-based composites, such as Mo2 C, MoN, and MoP, to form a hybrid structures. Using the open porosity derived from the pyrolysis of metal-organic frameworks (MOFs), the highly dispersive MoO2 small nanoparticles can be deposited in porous carbon by chemical vapor deposition (CVD). Undergoing different treatments of carbonization, nitridation, and phosphorization, the Mo2 C-, MoN-, and MoP-decorated carbocatalysts can be selectively prepared with un-changed morphology. Among these Mo-based composites, the MoP@Porous carbon (MoP@PC) composites exhibited remarkable catalytic activity for the hydrogen evolution reaction (HER) in 0.5 m H2 SO4 aqueous solution versus MoO2 @PC, Mo2 C@PC, and MoN@PC. This study gives a promising family of multifunctional lab-on-a-particle architectures which shed light on energy conversion and fuel-cell catalysis.

Amorphous nickel boride membrane on a platinum–nickel alloy surface for enhanced oxygen reduction reaction

The low activity of the oxygen reduction reaction in polymer electrolyte membrane fuel cells is a major barrier for electrocatalysis, and hence needs to be optimized. Tuning the surface electronic structure of platinum-based bimetallic alloys, a promising oxygen reduction reaction catalyst, plays a key role in controlling its interaction with reactants, and thus affects the efficiency. Here we report that a dealloying process can be utilized to experimentally fabricate the interface between dealloyed platinum–nickel alloy and amorphous nickel boride membrane. The coating membrane works as an electron acceptor to tune the surface electronic structure of the platinum–nickel catalyst, and this composite catalyst composed of crystalline platinum–nickel covered by amorphous nickel boride achieves a 27-times enhancement in mass activity relative to commercial platinum/carbon at 0.9 V for the oxygen reduction reaction performance. Moreover, this interactional effect between a crystalline surface and amorphous membrane can be readily generalized to facilitate the 3-times higher catalytic activity of commercial platinum/carbon.

Synthesis, properties and applications of one- and two-dimensional gold nanostructures

AbstractThe controlled synthesis of gold nanocrystals has been the subject of intensive studies for decades because the properties and functions of gold nanomaterials are highly dependent on their particle size, shape, and dimensionality. Especially, anisotropic gold nanocrystals, such as nanowires, nanobelts, nanoplates and nanosheets, have attracted much attention due to their striking properties and promising applications in electronics, catalysis, photonics, sensing and biomedicine. In this review, we will summarize the recent developments of onedimensional (1D) and two-dimensional (2D) gold nanostructures. Various kinds of synthetic methods for preparation of these 1D and 2D gold nanocrystals will be described. Moreover, we will also briefly introduce the properties and potential applications of these 1D and 2D gold nanocrystals.

AuAg nanosheets assembled from ultrathin AuAg nanowires.

Assembly of noble metal nanocrystals into free-standing two-dimensional (2D) nanostructures with a regular shape is still a challenge. Here we report the preparation of a novel 2D AuAg nanosheet with length of 1.50 ± 0.30 μm, width of 510 ± 160 nm, and thickness of ∼100 nm via the assembly of ultrathin AuAg nanowires in the presence of the triblock copolymer Pluronic P123. The self-assembly of P123 and the fusion behavior of the nanowires during the assembly process are the key reasons for the formation of AuAg nanosheets in P123. Furthermore, the obtained AuAg nanosheet@P123 is used as the active material in a memory device that exhibits the write-once-read-many-times memory behavior.

Regulation of Coordination Number over Single Co Sites: Triggering the Efficient Electroreduction of CO2

The design of active, selective, and stable CO2 reduction electrocatalysts is still challenging. A series of atomically dispersed Co catalysts with different nitrogen coordination numbers were prepared and their CO2 electroreduction catalytic performance was explored. The best catalyst, atomically dispersed Co with two-coordinate nitrogen atoms, achieves both high selectivity and superior activity with 94 % CO formation Faradaic efficiency and a current density of 18.1 mA cm-2 at an overpotential of 520 mV. The CO formation turnover frequency reaches a record value of 18 200 h-1 , surpassing most reported metal-based catalysts under comparable conditions. Our experimental and theoretical results demonstrate that lower a coordination number facilitates activation of CO2 to the CO2.- intermediate and hence enhances CO2 electroreduction activity.