Xuncai Chen

Amorphous Bimetallic Oxide–Graphene Hybrids as Bifunctional Oxygen Electrocatalysts for Rechargeable Zn–Air Batteries

Metal oxides of earth-abundant elements are promising electrocatalysts to overcome the sluggish oxygen evolution and oxygen reduction reaction (OER/ORR) in many electrochemical energy-conversion devices. However, it is difficult to control their catalytic activity precisely. Here, a general three-stage synthesis strategy is described to produce a family of hybrid materials comprising amorphous bimetallic oxide nanoparticles anchored on N-doped reduced graphene oxide with simultaneous control of nanoparticle elemental composition, size, and crystallinity. Amorphous Fe0.5 Co0.5 Ox is obtained from Prussian blue analog nanocrystals, showing excellent OER activity with a Tafel slope of 30.1 mV dec-1 and an overpotential of 257 mV for 10 mA cm-2 and superior ORR activity with a large limiting current density of -5.25 mA cm-2 at 0.6 V. A fabricated Zn-air battery delivers a specific capacity of 756 mA h gZn-1 (corresponding to an energy density of 904 W h kgZn-1 ), a peak power density of 86 mW cm-2 and can be cycled over 120 h at 10 mA cm-2 . Other two amorphous bimetallic, Ni0.4 Fe0.6 Ox and Ni0.33 Co0.67 Ox , are also produced to demonstrate the general applicability of this method for synthesizing binary metal oxides with controllable structures as electrocatalysts for energy conversion.

Cultivation of activated sludge using sea mud as seed to treat industrial phenolic wastewater with high salinity

A technique is proposed to treat saline hazardous wastewater by using marine activated sludge, cultivated with sea mud as seed. Since the developed marine activated sludge had phenol-tolerant microorganisms (MAS-1, MAS-2 and MAS-3) which originated from the ocean, it was envisaged that these bacteria could survive and breakdown phenol in saline environments. In this work, typical phenol-tolerant microorganisms were isolated from the marine activated sludge and identified. After a hierarchical acclimation process, the marine activated sludge was used to treat the industrial phenolic wastewater with high salinity. The marine activated sludge was able to break down phenol and other organic components effectively and efficiently in treating the wastewater with salinity of 5.7% w/v. The results showed a high removal of phenol (99%), COD (80%) and NH3-N (68%).

Hydrogen evolution reaction activity of nickel phosphide is highly sensitive to electrolyte pH

The nickel phosphide (Ni2P) family of materials have become a hot subject in hydrogen evolution reaction (HER) electrocatalyst research. Various studies have reported their high activity, high stability, and high faradaic efficiency. To date, there have been no systematic studies regarding the influence of pH on the HER performance of Ni2P. Here we show that the pH of electrolytes can strongly influence the HER activity of Ni2P electrocatalysts. Tests in 19 electrolytes with pH ranging from 0.52 to 13.53 show that Ni2P is much more active in strongly acidic and basic electrolytes. With the increase of pH, the lower H+ concentration reduces the formation of adsorbed H atoms in the Volmer reaction, resulting in poorer activities. However, the high activity observed in the strongly basic electrolytes is not the intrinsic property of Ni2P. We found that Ni oxides/hydroxides are formed in strongly basic electrolytes under applied potentials, resulting in improved activities. Furthermore, the specific activity based on the electrochemically active surface area of recently reported Ni2P catalysts is not high and requires significant improvements for practical applications.

Real-time monitoring of biofoulants in a membrane bioreactor during saline wastewater treatment for anti-fouling strategies

This work presents a novel, fast and simple monitoring-responding method at the very early stages of membrane bio-fouling in a membrane bioreactor (MBR) during saline wastewater treatment. The impacts of multiple environmental shocks on membrane fouling were studied. The transmembrane pressure exceeded the critical fouling pressure within 8days in the case of salinity shock or temperature shock. In the case of DO shock, the transmembrane pressure exceeded the critical fouling pressure after 16days, showing the lower impact of DO shock on the MBR. In another study, the membrane fouling was observed within 4days responding to mixed environmental shocks. To decrease the potential of membrane bio-fouling, another bioreactor was integrated immediately with the MBR as a quickly-responded countermeasure, when an early warning of membrane bio-fouling was provided. After the bioreactor enhancement, the time required for membrane fouling increased from 4 to 10days.

Metal-free bifunctional carbon electrocatalysts derived from zeolitic imidazolate frameworks for efficient water splitting

Metal-free carbon catalysts have attracted great interest because of their high electrical conductivity, tailorable porosity and surface area, affordability, and sustainability. In particular, their bifunctional activity for hydrogen and oxygen evolution reactions (HER and OER) is attractive for electrochemical splitting of water. However, pristine carbon materials have low activities for HER/OER. Here, a high-performance carbon electrocatalyst is demonstrated by first pyrolyzing a metal–organic framework (MOF), i.e., zeolitic imidazolate framework-8 (ZIF-8), followed by optimized cathodic polarization treatment (CPT). Pyrolyzing ZIF-8 produces a highly N-doped (8.4 at%) carbon material having a large specific surface area of 1017 m2 g−1 with micro and mesopores. CPT in 0.5 M H2SO4 for up to 8 hours modulates the composition of N- and O-containing surface functional groups of the pyrolyzed ZIF-8 without sacrificing its large surface area and pore size distribution. After the 6-hour CPT, this material shows an excellent HER activity in 0.5 M H2SO4 electrolyte with an overpotential of 155 mV, a Tafel slope of 54.7 mV dec−1, and an exchange current density of 0.063 mA cm−2. And the 4-hour CPT results in excellent OER activity in 0.1 M KOH electrolyte with an overpotential of 476 mV and a Tafel slope of 78.5 mV dec−1. In a demonstration, these two carbon electrocatalysts steadily run a two-electrode water electrolyzer at a current density of 10 mA cm−2 over 8 hours under a potential of 1.82 V with a Faradaic efficiency of 98.0–99.1% in 0.1 M KOH electrolyte. The superior activity of the designed carbon electrocatalysts can be attributed to the functional group composition modulation achieved by CPT. High-performance metal-free carbon electrocatalysts derived from MOFs show excellent potentials for energy and environmental applications.

Effect of bioflocculation on fouling-related biofoulants in a membrane bioreactor during saline wastewater treatments

A membrane bioreactor (MBR) was operated in two modes; with and without the inoculation of marine Arthrobacter cells, to investigate the effect of bioflocculation on membrane biofouling during saline wastewater treatments. The MBR-Arthrobacter system showed a higher resistance to membrane fouling than the normal MBR system. Lower concentrations of the fouling-related components and higher removal efficiencies of COD and NH3-N were observed in the MBR-Arthrobacter system. The bioflocculation of Arthrobacter preferred to settle down the humic acid-like, fulvic acid-like and aromatic proteins components (larger biomolecules) rather than the soluble microbial by-product-like components (smaller biomolecules).

Recent Advances in Materials and Design of Electrochemically Rechargeable Zinc–Air Batteries

The century-old zinc-air (Zn-air) battery concept has been revived in the last decade due to its high theoretical energy density, environmental-friendliness, affordability, and safety. Particularly, electrically rechargeable Zn-air battery technologies are of great importance for bulk applications like electric vehicles, grid management, and portable electronic devices. Nevertheless, Zn-air batteries are still not competitive enough to realize widespread practical adoption because of issues in efficiency, durability, and cycle life. Here, following an introduction to the fundamentals and performance testing techniques, the latest research progress related to electrically rechargeable Zn-air batteries is compiled, particularly new key findings in the last five years (2013-2018). The strategies concerning the development of Zn and air electrodes are in focus. The design of other battery components, namely electrolytes and separators are also discussed. Poor performance of O2 electrocatalysts and the lack of the long-term stability of Zn electrodes and electrolytes remain major challenges. Finally, recommendations regarding the testing routines and materials design are provided. It is hoped that this up-to-date account will help to shape the future research activities toward the development of practical electrically rechargeable Zn-air batteries with extended lifetime and superior performance.

Nano-RuO2-Decorated Holey Graphene Composite Fibers for Micro-Supercapacitors with Ultrahigh Energy Density

Compactness and versatility of fiber-based micro-supercapacitors (FMSCs) make them promising for emerging wearable electronic devices as energy storage solutions. But, increasing the energy storage capacity of microscale fiber electrodes, while retaining their high power density, remains a significant challenge. Here, this issue is addressed by incorporating ultrahigh mass loading of ruthenium oxide (RuO2 ) nanoparticles (up to 42.5 wt%) uniformly on nanocarbon-based microfibers composed largely of holey reduced graphene oxide (HrGO) with a lower amount of single-walled carbon nanotubes as nanospacers. This facile approach involes (1) space-confined hydrothermal assembly of highly porous but 3D interconnected carbon structure, (2) impregnating wet carbon structures with aqueous Ru3+ ions, and (3) anchoring RuO2 nanoparticles on HrGO surfaces. Solid-state FMSCs assembled using those fibers demonstrate a specific volumetric capacitance of 199 F cm-3 at 2 mV s-1 . Fabricated FMSCs also deliver an ultrahigh energy density of 27.3 mWh cm-3 , the highest among those reported for FMSCs to date. Furthermore, integrating 20 pieces of FMSCs with two commercial flexible solar cells as a self-powering energy system, a light-emitting diode panel can be lit up stably. The current work highlights the excellent potential of nano-RuO2 -decorated HrGO composite fibers for constructing micro-supercapacitors with high energy density for wearable electronic devices.