Xusheng Xiao

Glass-ceramic optical fiber containing Ba2TiSi2O8 nanocrystals for frequency conversion of lasers

A glass-ceramic optical fiber containing Ba2TiSi2O8 nanocrystals fabricated using a novel combination of the melt-in-tube method and successive heat treatment is reported for the first time. For the melt-in-tube method, fibers act as a precursor at the drawing temperature for which the cladding glass is softened while the core glass is melted. It is demonstrated experimentally that following heat treatment, Ba2TiSi2O8 nanocrystals with diameters below 10 nm are evenly distributed throughout the fiber core. Comparing to the conventional rod-in-tube method, the melt-in-tube method is superior in terms of controllability of crystallization to allow for the fabrication of low loss glass-ceramic fibers. When irradiated using a 1030 nm femtosecond laser, an enhanced green emission at a wavelength of 515 nm is observed in the glass-ceramic fiber, which demonstrates second harmonic generation of a laser action in the fabricated glass-ceramic fibers. Therefore, this new glass-ceramic fiber not only provides a highly promising development for frequency conversion of lasers in all optical fiber based networks, but the melt-in-tube fabrication method also offers excellent opportunities for fabricating a wide range of novel glass-ceramic optical fibers for multiple future applications including fiber telecommunications and lasers.

Ultra-short wavelength operation in Thulium-doped silica fiber laser with bidirectional pumping

An ultra-short wavelength operation of Tm-doped all fiber laser based on fiber Bragg gratings (FBGs) was developed. A bi-directional pump configuration for the ultra-short wavelength operation was designed and investigated for the first time. the laser yielded 3.15W of continuous-wave output at 1706.75nm with a narrow-linewidth of ~50pm and a maximum slope efficiency of 42.1%. The dependencies of the slope efficiencies and pump threshold of the laser versus the length of active fiber and reflectivity of the output mirror (FBG) were investigated in detail. An experimental comparative study between two Thulium-doped fiber lasers (TDFLs) with two different pumping configuration(forward unidirectional pumping and bidirectional pumping) was presented. It is indisputable that the development of 1.7μm silicate fiber lasers with Watt-level output power open up a number of heart-stirring and tempting application windows.

High Verdet constants and diamagnetic responses of GeS 2 -In 2 S 3 -PbI 2 chalcogenide glasses for integrated optics applications

Chalcogenide glasses as kind of diamagnetic magneto-optical materials have promising applications in the field of integrated optics and optical communication systems due to their excellent properties, such as easy to be processed into waveguide and temperature independence of the Verdet constants. For clarifying the influence factors following the compositional variation on Faraday effect and finding a glass with a large Verdet constant, novel pseudo-ternary chalcogenide glass system, GeS2 - In2S3 - PbI2, was prepared and investigated. The composition, wavelength and temperature dependences on the Verdet constants were systematically investigated at the wavelengths of 635, 808, 980 and 1319 nm. PbI2 was confirmed to have positive contribution to the Verdet constant and the Becquerel rule was proved to be an effective guidance for predicting the Verdet constant in chalcogenide glasses. The 60GeS2·15In2S3·25PbI2 glass was found to possess the largest Verdet constant (V = 0.215 min·G-1·cm-1, @808nm), which is great larger than that of commercial diamagnetic glasses. These glasses also possess good glass-forming ability and VIS-IR transmittance, therefore be a good candidate for next-generation integrated optical isolator and other magneto-optical devices.

Watts-level super-compact narrow-linewidth Tm-doped silica all-fiber laser near 1707 nm with fiber Bragg gratings

Watts-level ultra-short wavelength operation of a Tm-doped all fiber laser was developed by using a 1550 nm Er-doped fiber laser pump source and a pair of fiber Bragg gratings (FBGs). The laser yielded 1.28 W of continuous-wave output at 1707.01 nm with a narrow linewidth of ~44 pm by means of a 20 cm Tm-doped fiber. The dependencies of the slope efficiencies and pump threshold of the Tm-doped fiber laser versus the length of active fiber and reflectivity of the output mirror (FBG) were investigated in detail, in which the maximum average slope efficiency was 36.1%. There is no doubt that this all fiber laser will be a perfect pump source for mid-IR laser output.