Ya-qi Chen

A guiding system of astronomical imaging system for a 1.2-meter-aperture telescope

A guiding system is designed, implemented and tested for our 1.2-meter Quantum-Teleportation Telescope Imaging System, due to the lack of accuracy of its own star tracking function. This paper at first introduces some key technologies of the system including star extraction, offset computation, star tracking, offset conversion and exception handling. The guiding system is implemented as a RTS2 device, and interacts with a guiding CCD and telescope. The workflow control of the guiding process is pushed forward by a finite-state machine. The system is tested in Delingha, Qinghai province. In cloudless condition, the guiding system can work for 15 min continuously, and long-exposure images produced by main CCDs can meet scientific requirements.

Design of observational and control system of imaging system of a 1.2-meter-aperture telescope

The 1.2m Quantum Teleportation Telescope imaging system is a multi-band imaging system with dual channels called ‘red end’ and ‘blue end’. Each channel includes a CCD camera and a filter wheel system, and the blue end contains a focusing system. In order to improve the tracking accuracy, the guiding CCD is designed and deployed. The imaging system studies the mass of the black hole and the structure of AGN by observing the variation of AGN spectral line. In order to improve the observation efficiency, we design and implement a multi-level remote unattended observation and control system. The system adopts the framework of combining RTS2 and EPICS. EPICS is used to realize the individual control of each device. We defined status code and split device properties for debugging purpose or high-level invocating purpose. The EPICS Channel Access is integrated into the RTS2 software and a set of configurations in XML format is designed so that the RTS2 module can find the EPICS application. In the RTS2 layer, we developed a module for the coordinated control of the equipment. The module is responsible for sending instructions to the telescope and the guiding module according to the pre-defined list of observation plans, switching to the corresponding filter, and performing exposure operations. Finally, we developed web service and used web pages as user interface, which makes it convenient for users to control the telescope remotely and complete the observation task.

Design of a multiband near-infrared sky brightness monitor

Infrared sky background level is an important parameter of grounded infrared astronomy observations, which should be firstly measured in a good infrared observatory site, and only the site with low background level is suitable for infrared observations. Infrared sky background level can provide background data for the design of related infrared instruments. However, there is no such data available for major sites in China. Based on the requirement, In order to supplement the current site survey data and guide the design of future infrared instruments, a multiband near-infrared sky brightness monitor (MNISBM) based on an InSb sensor is designed in this paper. The MNISBM consists of optical system, mechanical structure and control system, detector and cooler, high gain readout electronic system, operational software. It is completed and carried out an experimental measurement in the laboratory. The result shows that the sensitivity of the MNISBM meets the requirements of the measurement of near-infrared sky background level.

Near infrared sky brightness measurement using an InGaAs detector

Tibet is known as the third pole of the earth. The Ngari (Ali) observatory in Tibet is a good site, and promising to be one of the best place for infrared and submillimeter observations in the world. However, there is no data available for sky background brightness in such place. In the near infrared band of J, H, Ks, a NIR sky brightness monitor (NISBM) is designed based on InGaAs photoelectric diode. By using the method of chopper modulation and digital lock-in amplifier processing, the SNR (Signal Noise Ratio), detectivity and the data acquisition speed of the device is greatly improved. The NISBM has been installed in Ngari observatory in July of 2017 and obtained the first data of NIR sky brightness at Ngari observatory.

Electronic control design of a two-channel imaging system of a 1.2-meter-aperture telescope

The Astronomical Imaging System of a 1.2-meter-aperture Telescope is a multi-band imaging system with red and blue channels. The mass and structure of AGN central black hole are studied by observing the change of AGN spectral line. We designed an optical system with dual channels, changing the focal length ratio of telescope from f/8.429 to f/5 through the lens, and divide the optical path into red and blue channels through the beam splitter. The red waveband is 650nm1000nm and the blue waveband is 400nm-650nm. Each channel has a CCD camera. We set up focusing lens before the camera of blue channel to compensate the difference focusing length between red and blue channel after the red channel being focused by adjusting the telescope. For the realization of three groups of broadband photometry and twenty-four groups of narrowband photometry, an automatic filter wheel system is designed to switch the filter. At the same time, in order to reduce the influence of temperature drift of the filter, a constant temperature adjusting system for filter wheel box is carried out. In order to overcome the issue that the telescope itself does not have enough tracking accuracy, a guiding system for the imaging system is designed and implemented. Finally, we designed and implemented a multi-level software control system so that the users can remotely control the telescope.