Yajun Jiang

Magnetic field sensing based on tilted fiber Bragg grating coated with nanoparticle magnetic fluid

A magnetic field sensor based on a tilted fiber Bragg grating (TFBG) coated with magnetic fluid is proposed and demonstrated experimentally. The sensing element is made by injecting the magnetic fluid into a capillary tube which contains a TFBG. The resonant wavelengths of the cladding modes of TFBG shift by varying the magnetic field which is perpendicular to the axis of TFBG. The results indicate that the resonant wavelength shifts of the cladding modes show a nonlinear dependence on the magnetic field. As the magnetic field increases to 32 mT, the largest resonant wavelength shift reaches to 106 pm. Moreover, this sensor shows good repeatability when it is used for magnetic field sensing.

Bend measurement using an etched fiber incorporating a fiber Bragg grating

A fiber Bragg grating (FBG) based bend measurement method using an etched fiber is proposed that utilizes the coupling of the core mode to the cladding and radiation modes at the bending region. An etching region of 99 µm diameter that serves as bend sensing head is achieved at 10 mm upstream the FBG through processing in 40% hydrofluoric acid, while the FBG acts as a narrowband reflector to enhance the sensitivity. The power variation curves are obtained for a wide range of bend angles, but the performance is limited due to the presence of the loss peaks. The sensing response is improved by immersing the etching region in a refractive index matching gel. The results are analyzed by using curve fitting formulas and are in good agreement. A large dynamic range of -27° to +27° and sensitivity of 0.43 dBm/deg is achieved, which can be enhanced by reducing the etched diameter.

Ultrafast all-fiber based cylindrical-vector beam laser

Cylindrical-vector beams (CVBs) with axial symmetry in polarization and field intensity are gathering increasing attention from fundamental research to practical applications. However, a majority of the CVBs are generated by modulating light beams in free space, and the temporal durations are far away from the ultrafast regime. Here, an ultrafast all-fiber based CVB laser is demonstrated via intermodal coupling in two mode fibers. In the temporal domain, chirp-free pulses are formed with combined actions of the ultrafast saturable absorption, self-phase modulation, and anomalous dispersion. In the spatial domain, the lateral offset splicing technique and a two mode fiber Bragg grating are adopted to excite and extract CVBs, respectively. The ultrafast CVB has an annular profile with a duration of 6.87 ps and a fundamental repetition rate of 13.16 MHz, and the output polarization status is switchable between radially and azimuthally polarized states. This all-fiber-based ultrafast CVB laser is a simple, lo...

Strain and high-temperature discrimination using a Type II fiber Bragg grating and a miniature fiber Fabry-Perot interferometer.

A novel method for simultaneous measurement of strain and high temperature using a Type II fiber Bragg grating (FBG) and a miniature fiber Fabry-Perot interferometer (MFFPI) is proposed. The MFFPI is produced by fusion splicing a short section of quartz capillary tube with two single-mode fibers, and then it is exposed by a focused femtosecond laser and a phase mask to inscribe a Type II FBG nearby. The reflection spectrum of this sensor is the superposition of the reflection spectrum of the FBG and the interference fringe of the MFFPI. This sensor shows perfect high-temperature and strain responses. Because of the different responses to the uniform variations of strain and temperature, by measuring the reflection peak of FBG and one of the interference dips of the MFFPI, strain and temperature can be simultaneously determined. The resolutions of this particular sensor in measuring strain and temperature are estimated to be ±8.4  μϵ and ±3.3°C, respectively, in the range from 0 to 1122 μϵ and from 23°C to 600°C.

Sensitivity enhancement of fiber loop cavity ring-down pressure sensor

We present a theoretical and experimental study on sensitivity enhancement of a fiber-loop cavity ring-down pressure sensor. The cladding of the sensing fiber is etched in hydrofluoric acid solution to enhance its sensitivity. The experimental results demonstrate that the pressure applied on the sensing fiber is linearly proportional to the difference between the reciprocals of the ring-down time with and without pressure, and the relative sensitivity exponentially increases with decreasing the cladding diameter. When the sensing fiber is etched to 41.15 microm, its sensitivity is about 36 times that of nonetched fiber in the range of 0 to 32.5 MPa. The measured relative standard deviation of the ring-down time is about 0.15% and, correspondingly, the least detectable loss is about 0.00069 dB.

Influence of the eigenmode polarization deviation on the output Sagnac frequency difference in nonplanar ring resonators

We present a theoretical model to quantitatively analyze the influence of the eigenmode polarization deviation (described with ellipticity parameter) on the output Sagnac frequency difference in two nonplanar ring resonators with different mirror arrangements. The theoretical and numerical analysis results prove that the deviation of the eigenmode polarization from the ideally circular polarized state will produce a drop of the output Sagnac frequency difference. Furthermore, for the identical ellipticity parameter and incident angles, the decline values along the rotation axis A(2) is more obvious than that along axis A(1). In other words, these results show that the output Sagnac frequency difference can be improved effectively by restraining the eigenmode polarization deviation quantitatively and that these analysis findings are useful for designing and optimizing the structure of laser gyroscopes with super-high precision.

Study and Test of a New Bundle-Structure Riser Stress Monitoring Sensor Based on FBG.

To meet the requirements of riser safety monitoring in offshore oil fields, a new Fiber Bragg Grating (FBG)-based bundle-structure riser stress monitoring sensor has been developed. In cooperation with many departments, a 49-day marine test in water depths of 1365 m and 1252 m was completed on the “HYSY-981” ocean oil drilling platform. No welding and pasting were used when the sensor was installed on risers. Therefore, the installation is convenient, reliable and harmless to risers. The continuous, reasonable, time-consistent data obtained indicates that the sensor worked normally under water. In all detailed working conditions, the test results show that the sensor can do well in reflecting stresses and bending moments both in and in magnitude. The measured maximum stress is 132.7 MPa, which is below the allowable stress. In drilling and testing conditions, the average riser stress was 86.6 MPa, which is within the range of the China National Offshore Oil Corporation (CNOOC) mechanical simulation results.

Ultralong time response of magnetic fluid based on fiber-optic evanescent field

The ultralong time (a few hours) response properties of magnetic fluid using etched optical fiber are visualized and investigated experimentally. The operating structure is made by injecting magnetic fluid into a capillary tube that contains etched single-mode fiber. An interesting extreme asymmetry is observed, in which the transmitted light intensity after the etched optical fiber cannot reach the final steady value when the external magnetic field is turned on (referred to as the falling process), while it can reach the stable state quickly once the magnetic field is turned off (referred to as the rising process). The relationship between the response times/loss rates of the transmitted light and the strength of the applied magnetic field is obtained. The physical mechanisms of two different processes are discussed qualitatively.

Packaged FBG sensors for real-time stress monitoring on deep-water riser

The safety of under-water risers in drilling platform is of great significance. A packaged fiber Bragg grating (FBG) sensor for real-time stress monitoring is designed for the applications on oil drilling risers under 3000 meters deep water. A copper tube which is the main component of the sensor has a small hole along its axes and a groove at its each end. The bare FBG is passed through the small hole and fixed to its ends by epoxy resin. Then the copper tube is packaged by filling the groove with structural adhesive. In order to avoid that the outer water-pressure is applied on the epoxy resin through the structural adhesive, a gap between the two types of glues is left. The relationships between the stress of the riser and the tension, pressure, temperature of the single sensor are discussed, respectively. The measured tension sensitivity is 136.75 pm/KN while the minimum R-square value is 0.99997. The experimental results also show that there is a good linear response between water-pressure and the Bragg wavelength from 0 to 30MPa, and the sensor can even survive under the pressure more than 30MPa. In addition, the Bragg wavelength shifts linearly with the increasing temperature from 0 to 40°C. So, the pressure and temperature can be easily compensated if another sensor without tension is used.

Visual and dynamical measurement of Rayleigh-Benard convection by using fiber-based digital holographic interferometry

We present a method for visual and dynamical measurement of the Rayleigh-Benard convection by using fiber-based digital holographic interferometry. A SM600 fiber with 4 μm core diameter is used instead of conventional pinhole, which has better performance to filter out the noises, effectively modify the structure of the optical path and relax the requirement of the laser performance (e.g., coherence length and beam uniformity). The experimental results show the development process of Rayleigh-Benard cell in the container. The corresponding Rayleigh number is 3.6. In the process, the temperature at the top and bottom plates is controlled at 295 K and 300 K, respectively. The measured temperature distribution and the number of Rayleigh-Benard cell are verified by using simulation and are in good agreement.