Yakun Yuan

Polar metals by geometric design

Gauss’s law dictates that the net electric field inside a conductor in electrostatic equilibrium is zero by effective charge screening; free carriers within a metal eliminate internal dipoles that may arise owing to asymmetric charge distributions. Quantum physics supports this view, demonstrating that delocalized electrons make a static macroscopic polarization, an ill-defined quantity in metals—it is exceedingly unusual to find a polar metal that exhibits long-range ordered dipoles owing to cooperative atomic displacements aligned from dipolar interactions as in insulating phases. Here we describe the quantum mechanical design and experimental realization of room-temperature polar metals in thin-film ANiO3 perovskite nickelates using a strategy based on atomic-scale control of inversion-preserving (centric) displacements. We predict with ab initio calculations that cooperative polar A cation displacements are geometrically stabilized with a non-equilibrium amplitude and tilt pattern of the corner-connected NiO6 octahedra—the structural signatures of perovskites—owing to geometric constraints imposed by the underlying substrate. Heteroepitaxial thin-films grown on LaAlO3 (111) substrates fulfil the design principles. We achieve both a conducting polar monoclinic oxide that is inaccessible in compositionally identical films grown on (001) substrates, and observe a hidden, previously unreported, non-equilibrium structure in thin-film geometries. We expect that the geometric stabilization approach will provide novel avenues for realizing new multifunctional materials with unusual coexisting properties.

Interfacial Octahedral Rotation Mismatch Control of the Symmetry and Properties of SrRuO3.

Epitaxial strain can be used to tune the properties of complex oxides with perovskite structure. Beyond just lattice mismatch, the use of octahedral rotation mismatch at heterointerfaces could also provide an effective route to manipulate material properties. Here, we examine the evolution of the structural motif (i.e., lattice parameters, symmetry, and octahedral rotations) of SrRuO3 films grown on substrates engineered to have the same lattice parameters, but different octahedral rotations. SrRuO3 films grown on SrTiO3 (001) (no octahedral rotations) and GdScO3-buffered SrTiO3 (001) (with octahedral rotations) substrates are found to exhibit monoclinic and tetragonal symmetry, respectively. Electrical transport and magnetic measurements reveal that the tetragonal films exhibit higher resistivity, lower magnetic Curie temperatures, and more isotropic magnetism as compared to those with monoclinic structure. Synchrotron-based quantification of the octahedral rotation network reveals that the tilting pattern in both film variants is the same (albeit with slightly different magnitudes of in-plane rotation angles). The abnormal rotation pattern observed in tetragonal SrRuO3 indicates a possible decoupling between the internal octahedral rotation and lattice symmetry, which could provide new opportunities to engineer thin-film structure and properties.

Terahertz Emission from Hybrid Perovskites Driven by Ultrafast Charge Separation and Strong Electron–Phonon Coupling

Unusual photophysical properties of organic-inorganic hybrid perovskites have not only enabled exceptional performance in optoelectronic devices, but also led to debates on the nature of charge carriers in these materials. This study makes the first observation of intense terahertz (THz) emission from the hybrid perovskite methylammonium lead iodide (CH3 NH3 PbI3 ) following photoexcitation, enabling an ultrafast probe of charge separation, hot-carrier transport, and carrier-lattice coupling under 1-sun-equivalent illumination conditions. Using this approach, the initial charge separation/transport in the hybrid perovskites is shown to be driven by diffusion and not by surface fields or intrinsic ferroelectricity. Diffusivities of the hot and band-edge carriers along the surface normal direction are calculated by analyzing the emitted THz transients, with direct implications for hot-carrier device applications. Furthermore, photogenerated carriers are found to drive coherent terahertz-frequency lattice distortions, associated with reorganizations of the lead-iodide octahedra as well as coupled vibrations of the organic and inorganic sublattices. This strong and coherent carrier-lattice coupling is resolved on femtosecond timescales and found to be important both for resonant and far-above-gap photoexcitation. This study indicates that ultrafast lattice distortions play a key role in the initial processes associated with charge transport.

Sub-wavelength modulation of χ(2) optical nonlinearity in organic thin films

Modulating the second-order nonlinear optical susceptibility (χ(2)) of materials at the nanoscale represents an ongoing technological challenge for a variety of integrated frequency conversion and nonlinear nanophotonic applications. Here we exploit the large hyperpolarizability of intermolecular charge transfer states, naturally aligned at an organic semiconductor donor–acceptor (DA) interface, as a means to control the magnitude and sign of χ(2) at the nanoscale. Focusing initially on a single pentacene-C60 DA interface, we confirm that the charge transfer transition is strongly aligned orthogonal to the heterojunction and find that it is responsible for a large interfacial nonlinearity probed via second harmonic generation that is sufficient to achieve d33>10 pm V−1, when incorporated in a non-centrosymmetric DA multilayer stack. Using grating-shadowed oblique-angle deposition to laterally structure the DA interface distribution in such multilayers subsequently enables the demonstration of a χ(2) grating with 280 nm periodicity, which is the shortest reported to date.

Continuously Tuning Epitaxial Strains by Thermal Mismatch

Strain engineering of thin films is a conventionally employed approach to enhance material properties and to energetically prefer ground states that would otherwise not be attainable. Controlling strain states in perovskite oxide thin films is usually accomplished through coherent epitaxy by using lattice-mismatched substrates with similar crystal structures. However, the limited choice of suitable oxide substrates makes certain strain states experimentally inaccessible and a continuous tuning impossible. Here, we report a strategy to continuously tune epitaxial strains in perovskite films grown on Si(001) by utilizing the large difference of thermal expansion coefficients between the film and the substrate. By establishing an adsorption-controlled growth window for SrTiO3 thin films on Si using hybrid molecular beam epitaxy, the magnitude of strain can be solely attributed to thermal expansion mismatch, which only depends on the difference between growth and room temperature. Second-harmonic generation measurements revealed that structure properties of SrTiO3 films could be tuned by this method using films with different strain states. Our work provides a strategy to generate continuous strain states in oxide/semiconductor pseudomorphic buffer structures that could help achieve desired material functionalities.

Chemistry, growth kinetics, and epitaxial stabilization of Sn2+ in Sn-doped SrTiO3 using (CH3)6Sn2 tin precursor

PbTiO3-based ferroelectrics have impressive electroactive properties, originating from the Pb2+ 6s2 electron lone-pair, which cause large elastic distortion and electric polarization due to cooperative pseudo Jahn-Teller effect. Recently, tin-based perovskite oxide (SnTiO3) containing Sn2+ and a chemistry similar to that of the 6s2 lone-pair has been identified as a thermally stable, environmentally friendly substitute for PbTiO3-based ferroelectrics. However experimental attempts to stabilize Sn2+ on the A-site of perovskite ATiO3 have so far failed. In this work, we report on the growth of atomically smooth, epitaxial, and coherent Sn-alloyed SrTiO3 films on SrTiO3 (001) substrates using a hybrid molecular beam epitaxy approach. With increasing Sn concentration, the out-of-plane lattice parameter first increases in accordance with the Vegard’s law and then decreases for Sn(Sr+Ti+Sn) at. % ratio > 0.1 due to the incorporation of Sn2+ at the A-site. Using a combination of high-resolution X-ray photoelectr...

Observation of Quasi-Two-Dimensional Polar Domains and Ferroelastic Switching in a Metal, Ca3Ru2O7

Polar domains arise in insulating ferroelectrics when free carriers are unable to fully screen surface-bound charges. Recently discovered binary and ternary polar metals exhibit broken inversion symmetry coexisting with free electrons that might be expected to suppress the electrostatic driving force for domain formation. Contrary to this expectation, we report the first direct observation of polar domains in single crystals of the polar metal Ca3Ru2O7. By a combination of mesoscale optical second-harmonic imaging and atomic-resolution scanning transmission electron microscopy, the polar domains are found to possess a quasi-two-dimensional slab geometry with a lateral size of ∼100 μm and thickness of ∼10 nm. Electronic structure calculations show that the coexistence of electronic and parity-lifting orders arise from anharmonic lattice interactions, which support 90° and 180° polar domains in a metal. Using in situ transmission electron microscopy, we also demonstrate a strain-tuning route to achieve ferroelastic switching of polar metal domains.

Light-activated Gigahertz Ferroelectric Domain Dynamics

Using time- and spatially resolved hard x-ray diffraction microscopy, the striking structural and electrical dynamics upon optical excitation of a single crystal of BaTiO_{3} are simultaneously captured on subnanoseconds and nanoscale within individual ferroelectric domains and across walls. A large emergent photoinduced electric field of up to 20×10^{6}  V/m is discovered in a surface layer of the crystal, which then drives polarization and lattice dynamics that are dramatically distinct in a surface layer versus bulk regions. A dynamical phase-field modeling method is developed that reveals the microscopic origin of these dynamics, leading to gigahertz polarization and elastic waves traveling in the crystal with sonic speeds and spatially varying frequencies. The advances in spatiotemporal imaging and dynamical modeling tools open up opportunities for disentangling ultrafast processes in complex mesoscale structures such as ferroelectric domains.

Artificial two-dimensional polar metal at room temperature

Polar metals, commonly defined by the coexistence of polar crystal structure and metallicity, are thought to be scarce because the long-range electrostatic fields favoring the polar structure are expected to be fully screened by the conduction electrons of a metal. Moreover, reducing from three to two dimensions, it remains an open question whether a polar metal can exist. Here we report on the realization of a room temperature two-dimensional polar metal of the B-site type in tri-color (tri-layer) superlattices BaTiO3/SrTiO3/LaTiO3. A combination of atomic resolution scanning transmission electron microscopy with electron energy-loss spectroscopy, optical second harmonic generation, electrical transport, and first-principles calculations have revealed the microscopic mechanisms of periodic electric polarization, charge distribution, and orbital symmetry. Our results provide a route to creating all-oxide artificial non-centrosymmetric quasi-two-dimensional metals with exotic quantum states including coexisting ferroelectric, ferromagnetic, and superconducting phases.Materials that combine metallic behaviour with stable electric polarization are scarce despite being proposed in the 1960s. Here the authors engineer a perovskite heterostructure where 2D polar metallic behavior coexists with built-in electric polarization from the displacement of B-site titanium cations.

Linear and nonlinear optical probe of the ferroelectric-like phase transition in a polar metal, LiOsO3

LiOsO3 is one of the first materials identified in the recent literature as a “polar metal,” a class of materials that are simultaneously noncentrosymmetric and metallic. In this work, the linear and nonlinear optical susceptibility of LiOsO3 is studied by means of ellipsometry and optical second harmonic generation (SHG). Strong optical birefringence is observed using spectroscopic ellipsometry. The nonlinear optical susceptibility extracted from SHG polarimetry reveals that the tensor components are of the same magnitude as in the isostructural insulator LiNbO3, except the component along the polar axis d33 is suppressed by an order of magnitude. Temperature-dependent SHG measurements in combination with Raman spectroscopy indicate a continuous order-disorder type polar phase transition at 140 K. Linear and nonlinear optical microscopy measurements reveal 109°/71° ferroelastic domain walls, like in other trigonal ferroelectrics. No 180° polar domain walls are observed to emerge across the phase transition.LiOsO3 is one of the first materials identified in the recent literature as a “polar metal,” a class of materials that are simultaneously noncentrosymmetric and metallic. In this work, the linear and nonlinear optical susceptibility of LiOsO3 is studied by means of ellipsometry and optical second harmonic generation (SHG). Strong optical birefringence is observed using spectroscopic ellipsometry. The nonlinear optical susceptibility extracted from SHG polarimetry reveals that the tensor components are of the same magnitude as in the isostructural insulator LiNbO3, except the component along the polar axis d33 is suppressed by an order of magnitude. Temperature-dependent SHG measurements in combination with Raman spectroscopy indicate a continuous order-disorder type polar phase transition at 140 K. Linear and nonlinear optical microscopy measurements reveal 109°/71° ferroelastic domain walls, like in other trigonal ferroelectrics. No 180° polar domain walls are observed to emerge across the phase transition.