Yamina André

Record Pure Zincblende Phase in GaAs Nanowires down to 5 nm in Radius

We report the Au catalyst-assisted synthesis of 20 μm long GaAs nanowires by the vapor-liquid-solid hydride vapor phase epitaxy (HVPE) exhibiting a polytypism-free zincblende phase for record radii lower than 15 nm down to 5 nm. HVPE makes use of GaCl gaseous growth precursors at high mass input of which fast dechlorination at the usual process temperature of 715 °C results in high planar growth rate (standard 30-40 μm/h). When it comes to the vapor-liquid-solid growth of nanowires, fast solidification at a rate higher than 100 μm/h is observed. Nanowire growth by HVPE only proceeds by introduction of precursors in the catalyst droplets from the vapor phase. This promotes almost pure axial growth leading to nanowires with a constant cylinder shape over unusual length. The question of the cubic zincblende structure observed in HVPE-grown GaAs nanowires regardless of their radius is at the heart of the paper. We demonstrate that the vapor-liquid-solid growth in our conditions takes place at high liquid chemical potential that originates from very high influxes of both As and Ga. This yields a Ga concentration systematically higher than 0.62 in the Au-Ga-As droplets. The high Ga concentration decreases the surface energy of the droplets, which disables nucleation at the triple phase line thus preventing the formation of wurtzite structure whatever the nanowire radius is.

Fast growth synthesis of GaAs nanowires with exceptional length.

We report the first synthesis of GaAs nanowires (NWs) by Au-assisted vapor-liquid-solid (VLS) growth in the novel hydride vapor phase epitaxy (HVPE) environment. Forty micrometer long rodlike <111> monocrystalline GaAs nanowires exhibiting a cubic zinc blende structure were grown in 15 min with a mean density of 10(6) cm(-2). The synthesis of such long figures in such a short duration could be explained by the growth physics of near-equilibrium HVPE. VLS-HVPE is mainly based on solidification after direct and continuous feeding of the arsenious and GaCl growth precursors through the Au-Ga liquid catalyst. Fast solidification (170 microm/h) is then assisted by the high decomposition frequency of GaCl. This predominant feeding through the liquid-solid interface with no mass and kinetic hindrance favors axial rather than radial growth, leading to twin-free nanowires with a constant cylinder shape over unusual length. The achievement of GaAs NWs several tens of micrometers long showing a high surface to volume ratio may open the field of III-V wires, as already addressed with ultralong Si nanowires.

Ultralong and defect-free GaN nanowires grown by the HVPE process.

GaN nanowires with exceptional lengths are synthesized by vapor-liquid-solid coupled with near-equilibrium hydride vapor phase epitaxy technique on c-plane sapphire substrates. Because of the high decomposition frequency of GaCl precursors and a direct supply of Ga through the catalyst particle, the growth of GaN nanowires with constant diameters takes place at an exceptional growth rate of 130 μm/h. The chemical composition of the catalyst droplet is analyzed by energy dispersive X-ray spectroscopy. High-resolution transmission electron microscopy and selective area diffraction show that the GaN nanowires crystallize in the hexagonal wurzite structure and are defect-free. GaN nanowires exhibit bare top facets without any droplet. Microphotoluminescence displays a narrow and intense emission line (1 meV line width) associated to the neutral-donor bound exciton revealing excellent optical properties of GaN nanowires.

Catalyst-assisted hydride vapor phase epitaxy of GaN nanowires: exceptional length and constant rod-like shape capability

The hydride vapor phase epitaxy (HVPE) process exhibits unexpected properties when growing GaN semiconductor nanowires (NWs). With respect to the classical well-known methods such as metal organic vapor phase epitaxy and molecular beam epitaxy, this near-equilibrium process based on hot wall reactor technology enables the synthesis of nanowires with a constant cylinder shape over unusual length. Catalyst-assisted HVPE shows a record short time process (less than 20 min) coupled to very low precursor consumption. NWs are grown at a fast solidification rate (50 μm h(-1)), facilitated by the high decomposition frequency of the chloride molecules involved in the HVPE process as element III precursors. In this work growth temperature and V/III ratio were investigated to determine the growth mechanism which led to such long NWs. Analysis based on the Ni-Ga phase diagram and the growth kinetics of near-equilibrium HVPE is proposed.

Vapor liquid solid-hydride vapor phase epitaxy (VLS-HVPE) growth of ultra-long defect-free GaAs nanowires: Ab initio simulations supporting center nucleation

High aspect ratio, rod-like and single crystal phase GaAs nanowires (NWs) were grown by gold catalyst-assisted hydride vapor phase epitaxy (HVPE). High resolution transmission electron microscopy and micro-Raman spectroscopy revealed polytypism-free zinc blende (ZB) NWs over lengths of several tens of micrometers for a mean diameter of 50 nm. Micro-photoluminescence studies of individual NWs showed linewidths smaller than those reported elsewhere which is consistent with the crystalline quality of the NWs. HVPE makes use of chloride growth precursors GaCl of which high decomposition frequency after adsorption onto the liquid droplet catalysts, favors a direct and rapid introduction of the Ga atoms from the vapor phase into the droplets. High influxes of Ga and As species then yield high axial growth rate of more than 100 μm/h. The diffusion of the Ga atoms in the liquid droplet towards the interface between the liquid and the solid nanowire was investigated by using density functional theory calculations. The diffusion coefficient of Ga atoms was estimated to be 3 × 10(-9) m(2)/s. The fast diffusion of Ga in the droplet favors nucleation at the liquid-solid line interface at the center of the NW. This is further evidence, provided by an alternative epitaxial method with respect to metal-organic vapor phase epitaxy and molecular beam epitaxy, of the current assumption which states that this type of nucleation should always lead to the formation of the ZB cubic phase.

Photoassisted tunneling from free-standing GaAs thin films into metallic surfaces

The tunnel photocurrent between a gold surface and a free-standing semiconducting thin film excited from the rear by above band-gap light has been measured as a function of applied bias, tunnel distance, and excitation light power. The results are compared with the predictions of a model which includes the bias dependence of the tunnel barrier height and the bias-induced decrease in surface recombination velocity. It is found that (i) the tunnel photocurrent from the conduction band dominates that from surface states. (ii) At large tunnel distance, the exponential bias dependence of the current is explained by that of the tunnel barrier height while at small distance, the change in surface recombination velocity is dominant.

Self-catalyzed GaAs nanowires on silicon by hydride vapor phase epitaxy

Gold-free GaAs nanowires on silicon substrates can pave the way for monolithic integration of photonic nanodevices with silicon electronic platforms. It is extensively documented that the self-catalyzed approach works well in molecular beam epitaxy but is much more difficult to implement in vapor phase epitaxies. Here, we report the first gallium-catalyzed hydride vapor phase epitaxy growth of long (more than 10 μm) GaAs nanowires on Si(111) substrates with a high integrated growth rate up to 60 μm h-1 and pure zincblende crystal structure. The growth is achieved by combining a low temperature of 600 °C with high gaseous GaCl/As flow ratios to enable dechlorination and formation of gallium droplets. GaAs nanowires exhibit an interesting bottle-like shape with strongly tapered bases, followed by straight tops with radii as small as 5 nm. We present a model that explains the peculiar growth mechanism in which the gallium droplets nucleate and rapidly swell on the silicon surface but then are gradually consumed to reach a stationary size. Our results unravel the necessary conditions for obtaining gallium-catalyzed GaAs nanowires by vapor phase epitaxy techniques.

Hydride Vapor Phase Epitaxy for Current III–V and Nitride Semiconductor Compound Issues

Abstract Hydride vapor phase epitaxy (HVPE) was part of the very first vapor phase epitaxy processes developed for the growth of III–V semiconductor layers. HVPEs features—the most well-known being its fast growth—rely on the use of chloride gaseous growth precursors as transport agents of the group III elements. HVPE is known as a near-equilibrium growth method. This chapter revisits this concept, emphasizing its exploitation and the application of the peculiar kinetics-limited HVPE growth regimen for modern III-(V,N) compound issues. The chapter also focuses on the use of HVPE for shaping nanoscale structures. HVPE allows the achievement of a huge growth anisotropy between crystal orientations, which results in the synthesis of structures with unusually high aspect ratios.

Crystal engineering by tuning the growth kinetics of GaN 3-D microstructures in SAG-HVPE

The growth of GaN 3-D microstructures is investigated by SAG-HVPE. Capitalizing on the properties of this kinetically-controlled process, the main experimental parameters and physical mechanisms that control the shaping of 3D GaN prisms and pyramids in SAG-HVPE are highlighted. Growth experiments performed on N-polar AlN/Si(100) and Ga-polar GaN/Si(111) substrates also provide insight into how to switch from a pyramid to a prismatic shape for a given substrate polarity. The aspect ratio of GaN rods could be tuned by playing with the HCl partial pressure additionally introduced during growth. The influence of both mass transport and surface kinetics is discussed, as the crystal growth rate varies with increasing surface area as time goes by. Ammonia treatment prior to the growth, aimed at blocking the r planes thanks to H2 passivation, is proposed to tune the morphology of the GaN rods. Raman spectroscopy performed on individual GaN rods shows no relevant strain field and no structural differences between the rods and state-of-the-art bulk GaN.

Hydride VPE: the unexpected process for the fast growth of GaAs and GaN nanowires with record aspect ratio and polytypism-free crystalline structure

Hydride Vapor Phase Epitaxy (HVPE) makes use of chloride III-Cl and hydride V-H3 gaseous growth precursors. It is known as a near-equilibrium process, providing the widest range of growth rates from 1 to more than 100 μm/h. When it comes to metal catalyst-assisted VLS (vapor-liquid-solid) growth, the physics of HVPE growth is maintained: high dechlorination frequency, high axial growth rate of nanowires (NWs) up to 170 μm/h. The remarkable features of NWs grown by HVPE are the untapered morphology with constant diameter and the stacking fault-free crystalline phase. Record pure zinc blende cubic phase for 20 μm long GaAs NWs with radii of 10 and 5 nm is shown. The absence of wurtzite phase in GaAs NWs grown by HVPE whatever the diameter is discussed with respect to surface energetic grounds and kinetics. Ni assisted, Ni-Au assisted and catalyst-free HVPE growth of wurtzite GaN NWs is also addressed. Micro-photoluminescence spectroscopy analysis revealed GaN nanowires of great optical quality, with a FWHM of 1 meV at 10 K for the neutral donor bound exciton transition.