Yanna Hao

Preparation of a push-pull osmotic pump of felodipine solubilized by mesoporous silica nanoparticles with a core-shell structure

The purpose of this study was to use mesoporous silica nanoparticles to improve drug dissolution after releasing from a push-pull osmotic pump. Felodipine was selected as the model drug and it was first incorporated into mesoporous silica nanoparticles prepared previously by the solvent evaporation method after we had examined a series of drug-silica ratios to load the drug into the mesoporous silica nanoparticles in order to find the optimum ratio for drug loading. Then, the drug-carrier was added to the drug-layer of the push-pull osmotic pump. PEO (Mw 100,000) was used as a suspending agent and PEO (Mw 6,000,000) was used as an expanding agent. The core tablets were coated with cellulose acetate (CA) as a semipermeable membrane containing polyethylene glycol (PEG) 6000 to control the membrane permeability. In vitro dissolution studies showed that the self-made osmotic pump tablets were able to deliver felodipine in an approximately zero-order manner in 12 h. A pharmacokinetic study was carried out to compare the new system with reference sustained-release tablets. It was found that the half-life of felodipine in the push-pull osmotic pump tablets was prolonged 1.8-fold, the bioavailability was increased 18% and the maximum plasma concentration reduced by 25%. In conclusion, using the self-made push-pull osmotic pump in combination with mesoporous silica nanoparticles was able to effectively increase the bioavailability of felodipine and reduce fluctuations in its plasma concentration.

Naringenin-loaded solid lipid nanoparticles: preparation, controlled delivery, cellular uptake, and pulmonary pharmacokinetics.

Naringenin (NRG), a flavonoid compound, had been reported to exhibit extensive pharmacological effects, but its water solubility and oral bioavailability are only~46±6 µg/mL and 5.8%, respectively. The purpose of this study is to design and develop NRG-loaded solid lipid nanoparticles (NRG-SLNs) to provide prolonged and sustained drug release, with improved stability, involving nontoxic nanocarriers, and increase the bioavailability by means of pulmonary administration. Initially, a group contribution method was used to screen the best solid lipid matrix for the preparation of SLNs. NRG-SLNs were prepared by an emulsification and low-temperature solidification method and optimized using an orthogonal experiment approach. The morphology was examined by transmission electron microscopy, and the particle size and zeta potential were determined by photon correlation spectroscopy. The total drug content of NRG-SLNs was measured by high-performance liquid chromatography, and the encapsulation efficiency (EE) was determined by Sephadex gel-50 chromatography and high-performance liquid chromatography. The in vitro NRG release studies were carried out using a dialysis bag. The best cryoprotectant to prepare NRG-SLN lyophilized powder for future structural characterization was selected using differential scanning calorimetry, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The short-term stability, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay, cellular uptake, and pharmacokinetics in rats were studied after pulmonary administration of NRG-SLN lyophilized powder. Glycerol monostearate was selected to prepare SLNs, and the optimal formulation of NRG-SLNs was spherical in shape, with a particle size of 98 nm, a polydispersity index of 0.258, a zeta potential of −31.4 mV, a total drug content of 9.76 mg, an EE of 79.11%, and a cumulative drug release of 80% in 48 hours with a sustained profile. In addition, 5% mannitol (w/v) was screened as a cryoprotectant. Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies confirmed that the drug was encapsulated into SLNs in an amorphous form. The lyophilized powder was stable at both refrigeration (4°C) and ambient temperature (25°C) for 3 months, and the MTT assay demonstrated that the SLNs were nontoxic. The cellular uptake of fluorescein isothiocyanate-labeled SLNs in A549 cells was highly time dependent over a period of 3 hours, while the pharmacokinetic study in Sprague Dawley rats showed that the relative bioavailability of NRG-SLNs was 2.53-fold greater than that of NRG suspension after pulmonary administration. This study shows that SLNs offer a promising pulmonary delivery system to increase the bioavailability of the poorly water-soluble drug NRG.

Synthesis of novel core-shell structured dual-mesoporous silica nanospheres and their application for enhancing the dissolution rate of poorly water-soluble drugs

Novel core-shell dual-mesoporous silica nanospheres (DMSS) with a tunable pore size were synthesized successfully using a styrene monomer as a channel template for the core and cetyltrimethyl ammonium bromide (CTAB) as a channel template for the shell in order to improve the dissolution rate of poorly water-soluble drugs. Simvastatin was used as a model drug and loaded into DMSS and the mesoporous core without the shell (MSC) by the solvent evaporation method. The drug loading efficiency of DMSS and MSC were determined by thermogravimetric analysis (TGA) and ultraviolet spectroscopy (UV). Characterization, using scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption, powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared spectroscopy (FTIR) showed that simvastatin adsorbed in DMSS and MSC was in an amorphous state, and in vitro release test results demonstrated that both DMSS and MSC increased the water solubility and dissolution rate of simvastatin. The shell structure of DMSS was able to regulate the release of simvastatin compared with MSC. It is worth noting that DMSS has significant potential as a carrier for improving the dissolution of poorly water-soluble drugs and reducing the rapid release.

Development of an oral push–pull osmotic pump of fenofibrate-loaded mesoporous silica nanoparticles

In this study, mesoporous silica nanoparticles (MSNs) were used to prepare an oral push–pull osmotic pump. Fenofibrate, the selected model drug, was firstly loaded into the MSNs, followed by a suspending agent consisting of a drug layer of push–pull osmotic pump. Fenofibrate-loaded MSNs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption analysis, differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD) analysis, and Fourier-transform infrared (FT-IR) spectroscopy. Polyethylene oxide of molecular weight (MW) 100,000 and polyethylene oxide of MW 6,000,000 were selected as the suspending agent and the expanding agent, respectively. Cellulose acetate was used as the semipermeable membrane, along with polyethylene glycol 6,000 to increase the flexibility and control the membrane permeability. The in vitro dissolution studies indicated that the osmotic pump tablet combined with MSNs was able to deliver fenofibrate in an approximately zero-order manner in 24 hours. A pharmacokinetic study showed that, although the maximum plasma concentration of the osmotic pump was lower than that of the reference formulation, the relative bioavailability was increased, indicating that the osmotic pump was more efficient than the reference tablets. Therefore, using MSNs as a carrier for poorly water-soluble drugs is an effective method for preparing osmotic pump tablets.

Development of novel core-shell dual-mesoporous silica nanoparticles for the production of high bioavailable controlled-release fenofibrate tablets

Abstract Novel core-shell dual-mesoporous silica nanoparticles (DMSN) were successfully prepared as a carrier in order to improve the dissolution of fenofibrate and obtain an oral highly bioavailable controlled-release drug delivery system using the osmotic pump technology. Fenofibrate was loaded into DMSN by an adsorption method. The solid state properties of fenofibrate in DMSN, before and after drug loading, were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption analysis (BET), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and differential scanning calorimetry (DSC). In vitro release tests showed that DMSN increased the dissolution rate of fenofibrate and produced zero-order release in push–pull osmotic pump tablets (OPT). The relative bioavailability of OPT was 186.9% in comparison with the commercial reference product. In summary, osmotic pump technology in combination with solid dispersion technology involving nanometer materials is a promising way for achieving the oral delivery of poorly water-soluble drugs.

Lipid-coated hollow mesoporous silica nanospheres for co-delivery of doxorubicin and paclitaxel: Preparation, sustained release, cellular uptake and pharmacokinetics

A carrier consisting of lipid-coated hollow mesoporous silica nanospheres (L-HMSN) was produced for the combination of the water-insoluble drug (paclitaxel, PTX) and the water-soluble drug (doxorubicin, DOX). DOX was adsorbed into the nanoscale hollow structure of the hollow mesoporous silica nanospheres (HMSN) by adsorption and PTX was wrapped in the phospholipid layer of the HMSN surface by lipid film hydration method. The characterization results showed that DOX and PTX were present in the nanopheres in an amorphous state. The loaded L-HMSN (DOX/PTX@L-HMSN) in vitro drug release showed a sustained release in phosphate buffered solution (PBS) at pH6.8 and 0.001%SDS. The cellular uptake experiment indicated that L-HMSN was successfully taken up by A549 cells. In addition, the combination of DOX and PTX in L-HMSN exhibited a marked synergistic effect in inhibiting the proliferation of A549 cells. The pharmacokinetic study demonstrated that L-HMSN could significantly improve the relative bioavailability of DOX and PTX. These results confirm that L-HMSN is a promising carrier for successful drug combination.

Application of a lipid-coated hollow calcium phosphate nanoparticle in synergistic co-delivery of doxorubicin and paclitaxel for the treatment of human lung cancer A549 cells

In this study, we developed a lipid-coated hollow calcium phosphate (LCP) nanoparticle for the combined application of two chemotherapeutic drugs to human lung cancer A549 cells. Hydrophilic doxorubicin (DOX) was incorporated into the hollow structure of hollow calcium phosphate (HCP), and a lipid bilayer containing hydrophobic paclitaxel (PTX) was subsequently coated on the surface of HCP. The study on combinational effects demonstrated that the combination of DOX and PTX at a mass ratio of 12:1 showed a synergistic effect against A549 cells. The particle size, zeta potential, and encapsulation efficiency were measured to obtain optimal values: particle size was 335.0 3.2 nm, zeta potential −41.1 mV, and encapsulation efficiency 80.40%±2.24%. An in vitro release study indicated that LCP produced a sustained drug release. A549 cells had a better uptake of LCP with good biocompatibility. Furthermore, in vitro cytotoxicity experiment, apoptosis analysis, in vivo anti-tumor efficacy and protein expression analysis of Bax, Bcl-2, and Caspase-3 demonstrated that the co-delivery system based on LCP had significant synergistic anti-tumor activity. All conclusions suggested that LCP is a promising platform for co-delivery of multiple anti-tumor drugs.

Development of a novel starch with a three-dimensional ordered macroporous structure for improving the dissolution rate of felodipine

In this study, silica nanospheres with different particle sizes were used as hard template for synthesis of a starch with a novel three-dimensional ordered macroporous structure (3DOMTS). As a pharmaceutical adjuvant, 3DOMTS was used to improve the dissolution rate and oral relative bioavailability of water-insoluble drugs. Felodipine (FDP) was chosen as a model drug and was loaded into the 3DOMTS by solvent evaporation. FDP loading into 3DOMTS with different pore sizes was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimeter (DSC), powder X-ray diffractometer (PXRD) and Fourier-Transform Infrared (FTIR). The results obtained showed that FDP was present in the pores in an amorphic or microcrystalline state. The in vitro dissolution results showed that 3DOMTS could effectively improve the dissolution rate of FDP in comparison with commercial common tablets. Pharmacokinetic results indicated that the oral relative bioavailability of self-made FDP-3DOMTS tablets were 184%, showing that 3DOMTS produced a significantly increased oral absorption of FDP. In conclusion, 3DOMTS exhibits the dual potential of improving the dissolution rate of poorly water soluble drugs and the novel filler produced by direct compression technology confirming that 3DOMTS will be useful for many applications in the field of pharmaceutics.

Preparation of a novel starch-derived three-dimensional ordered macroporous carbon for improving the dissolution rate and oral bioavailability of water-insoluble drugs.

In our study, soluble starch was applied as a novel carbon source for preparing three-dimensional ordered macroporous carbon (3DOMC) using monodisperse silica nanospheres as the hard template. The 3DOMC was used as an insoluble drug carrier when it was found that it could markedly improve the water solubility of felodipine (FDP). The structural features of 3DOMC were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The 3DOMC structure was found to have a higher drug loading than microporous and mesoporous structures, and the interconnected nanostructure effectively inhibited the formation of drug crystals. FDP, belonging to the Biopharmaceutics Classification System II (BCSII), was chosen as the model drug and was loaded into the 3DOMC structure by solvent evaporation. The state of FDP in the 3DOMC structure was characterized by powder X-ray diffractometry (PXRD), differential scanning calorimetry (DSC) and Fourier-transform infrared spectroscopy (FTIR). The results obtained showed that FDP was present in the pores in an amorphous or microcrystalline state. In vivo and in vitro experiments indicated that 3DOMC could significantly improve the drug dissolution rate, but the FDP-3DOMC self-made common tablets had the disadvantage of a burst effect. For this reason, osmotic pump technology was used to control the drug release rate. We developed a potentially useful insoluble drug carrier for pharmaceutical applications.

Preparation of starch macrocellular foam for increasing the dissolution rate of poorly water-soluble drugs

Abstract Starch macrocellular foam (SMF), a novel natural bio-matrix material, was prepared by the hard template method in order to improve the dissolution rate and oral bioavailability of poorly water-soluble drugs. Nitrendipine (NDP) was chosen as a model drug and was loaded into SMF by the solvent evaporation method. SMF and the loaded SMF samples (NDP-SMF) were characterized by scanning electron microscopy, differential scanning calorimetry, X-ray powder diffraction and Fourier transform infrared spectroscopy. In vitro drug release studies showed that SMF significantly increased the dissolution rate of NDP. In vivo studies showed that the NDP-SMF tablets clearly increased the oral bioavailability of NDP in comparison with the reference commercial tablets. All the results obtained demonstrated that SMF was a promising carrier for the oral delivery of poor water-soluble drugs.