Yasser Khan

Monitoring of Vital Signs with Flexible and Wearable Medical Devices

Advances in wireless technologies, low-power electronics, the internet of things, and in the domain of connected health are driving innovations in wearable medical devices at a tremendous pace. Wearable sensor systems composed of flexible and stretchable materials have the potential to better interface to the human skin, whereas silicon-based electronics are extremely efficient in sensor data processing and transmission. Therefore, flexible and stretchable sensors combined with low-power silicon-based electronics are a viable and efficient approach for medical monitoring. Flexible medical devices designed for monitoring human vital signs, such as body temperature, heart rate, respiration rate, blood pressure, pulse oxygenation, and blood glucose have applications in both fitness monitoring and medical diagnostics. As a review of the latest development in flexible and wearable human vitals sensors, the essential components required for vitals sensors are outlined and discussed here, including the reported sensor systems, sensing mechanisms, sensor fabrication, power, and data processing requirements.

All-organic optoelectronic sensor for pulse oximetry

Pulse oximetry is a ubiquitous non-invasive medical sensing method for measuring pulse rate and arterial blood oxygenation. Conventional pulse oximeters use expensive optoelectronic components that restrict sensing locations to finger tips or ear lobes due to their rigid form and area-scaling complexity. In this work, we report a pulse oximeter sensor based on organic materials, which are compatible with flexible substrates. Green (532 nm) and red (626 nm) organic light-emitting diodes (OLEDs) are used with an organic photodiode (OPD) sensitive at the aforementioned wavelengths. The sensors active layers are deposited from solution-processed materials via spin-coating and printing techniques. The all-organic optoelectronic oximeter sensor is interfaced with conventional electronics at 1 kHz and the acquired pulse rate and oxygenation are calibrated and compared with a commercially available oximeter. The organic sensor accurately measures pulse rate and oxygenation with errors of 1% and 2%, respectively.

High-performance flexible energy storage and harvesting system for wearable electronics.

This paper reports on the design and operation of a flexible power source integrating a lithium ion battery and amorphous silicon solar module, optimized to supply power to a wearable health monitoring device. The battery consists of printed anode and cathode layers based on graphite and lithium cobalt oxide, respectively, on thin flexible current collectors. It displays energy density of 6.98 mWh/cm2 and demonstrates capacity retention of 90% at 3C discharge rate and ~99% under 100 charge/discharge cycles and 600 cycles of mechanical flexing. A solar module with appropriate voltage and dimensions is used to charge the battery under both full sun and indoor illumination conditions, and the addition of the solar module is shown to extend the battery lifetime between charging cycles while powering a load. Furthermore, we show that by selecting the appropriate load duty cycle, the average load current can be matched to the solar module current and the battery can be maintained at a constant state of charge. Finally, the battery is used to power a pulse oximeter, demonstrating its effectiveness as a power source for wearable medical devices.

Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors

A method to print two materials of different functionality during the same printing step is presented. In printed electronics, devices are built layer by layer and conventionally only one type of material is deposited in one pass. Here, the challenges involving printing of two emissive materials to form polymer light-emitting diodes (PLEDs) that emit light of different wavelengths without any significant changes in the device characteristics are described. The surface-energy-patterning technique is utilized to print materials in regions of interest. This technique proves beneficial in reducing the amount of ink used during blade coating and improving the reproducibility of printed films. A variety of colors (green, red, and near-infrared) are demonstrated and characterized. This is the first known attempt to print multiple materials by blade coating. These devices are further used in conjunction with a commercially available photodiode to perform blood oxygenation measurements on the wrist, where common accessories are worn. Prior to actual application, the threshold conditions for each color are discussed, in order to acquire a stable and reproducible photoplethysmogram (PPG) signal. Finally, based on the conditions, PPG and oxygenation measurements are successfully performed on the wrist with green and red PLEDs.

Impedance sensing device for monitoring ulcer healing in human patients

Chronic skin wounds affect millions of people each year and take billions of dollars to treat. Ulcers are a type of chronic skin wound that can be especially painful for patients and are tricky to treat because current monitoring solutions are subjective. We have developed an impedance sensing tool to objectively monitor the progression of healing in ulcers, and have begun a clinical trial to evaluate the safety and feasibility of our device to map damaged regions of skin. Impedance data has been collected on five patients with ulcers, and impedance was found to correlate with tissue health. A damage threshold was applied to effectively identify certain regions of skin as “damaged tissue”.

ZnO nanorods for simultaneous light trapping and transparent electrode application in solar cells

Efficacy of using vertically grown ZnO nanorod array in enhancing electromagnetic field intensity and serving as the top contact layer (transparent electrodes) for solar cells was investigated.

Wireless Embedded Control System for Atomically Precise Manufacturing

This paper will explore the possibilities of implementing a wireless embedded control system for atomically precise manufacturing. The manufacturing process, similar to Scanning Tunneling Microscopy, takes place within an Ultra High Vacuum (UHV) chamber at a pressure of 10-10 torr. In order to create vibration isolation, and to keep internal noise to a minimum, a wireless link inside the UHV chamber becomes essential. We present a MATLAB simulation of the problem, and then demonstrate a hardware scheme between a Gumstix computer and a Linux based laptop for controlling nano-manipulators with three degrees of freedom.

System design for organic pulse oximeter

Wearable medical devices that would benefit from mechanical flexibility and new form factors represent a great shift in direction of research in the field of printed electronics. The minimal functionality desired from wearable medical devices is the monitoring of vital signs. Pulse rate and blood oxygenation are considered primary vital signs that help to evaluate the general physical health of a person. The methods used to measure pulse rate and blood oxygenation with sensors based on organic light-emitting diodes (OLEDs) and organic photodiodes (OPDs) are reported here. Departing from the conventional practice of using red (630 nm) and infrared (940 nm) light for measuring pulse oxygenation, we have successfully implemented solution processed red (626 nm) and green (532 nm) OLEDs fabricated from polyfluorene blends in an all-organic optoelectronic pulse oximeter sensor. The red and green OLEDs operate at 9 V, 1 kHz, and transmit light through a human index finger. The transmitted light is sensed by an OPD placed on the opposite side of the finger. After filtering and amplification, the photoplethysmogram (PPG) signal is obtained and used to accurately measure pulse rate and blood oxygenation.

Fabrication of tuning-fork based AFM and STM tungsten probe

We compare the sharpness of tungsten probe tips produced by the single-step and two-step dynamic electrochemical etching processes. A small radius of curvature (RoC) of 25 nm or less was routinely obtained when the two-step electrochemical etching (TEE) process was adopted, while the smallest achievable RoC was ∼10 nm, rendering it suitable for atomic force microscopy (AFM) or scanning tunneling microscopy (STM) applications.