Yeon-Jee Yoo

Comparison of Alternative Image Reformatting Techniques in Micro–Computed Tomography and Tooth Clearing for Detailed Canal Morphology

INTRODUCTION Micro-computed tomography (MCT) shows detailed root canal morphology that is not seen with traditional tooth clearing. However, alternative image reformatting techniques in MCT involving 2-dimensional (2D) minimum intensity projection (MinIP) and 3-dimensional (3D) volume-rendering reconstruction have not been directly compared with clearing. The aim was to compare alternative image reformatting techniques in MCT with tooth clearing on the mesiobuccal (MB) root of maxillary first molars. METHODS Eighteen maxillary first molar MB roots were scanned, and 2D MinIP and 3D volume-rendered images were reconstructed. Subsequently, the same MB roots were processed by traditional tooth clearing. Images from 2D, 3D, 2D + 3D, and clearing techniques were assessed by 4 endodontists to classify canal configuration and to identify fine anatomic structures such as accessory canals, intercanal communications, and loops. RESULTS All image reformatting techniques in MCT showed detailed configurations and numerous fine structures, such that none were classified as simple type I or II canals; several were classified as types III and IV according to Weine classification or types IV, V, and VI according to Vertucci; and most were nonclassifiable because of their complexity. The clearing images showed less detail, few fine structures, and numerous type I canals. Classification of canal configuration was in 100% intraobserver agreement for all 18 roots visualized by any of the image reformatting techniques in MCT but for only 4 roots (22.2%) classified according to Weine and 6 (33.3%) classified according to Vertucci, when using the clearing technique. CONCLUSIONS The combination of 2D MinIP and 3D volume-rendered images showed the most detailed canal morphology and fine anatomic structures.

Trace metal contents of three tricalcium silicate materials: MTA Angelus, Micro Mega MTA and Bioaggregate

AIM To investigate the levels of nine metals [aluminium (Al), antimony (Sb), arsenic (As), beryllium (Be), cadmium (Cd), chromium (Cr), iron (Fe), lead (Pb) and molybdenum (Mo)] in MTA Angelus, Micro Mega MTA and Bioaggregate using inductively coupled plasma-optical emission spectrometry (ICP-OES). METHODOLOGY Each material (0.2 g) was digested using a mixture of hydrochloric and nitric acids and then filtered. The levels of nine metals in the resulting filtrates were measured by ICP-OES. The results were statistically analysed using one-way anova and the Bonferroni test. RESULTS MTA Angelus contained more aluminium, beryllium and chromium than Micro Mega MTA (P < 0.05), whilst their levels of arsenic, cadmium and iron were similar. Antimony, lead and molybdenum were not detected in any of the three tested cements. Bioaggregate contained trace amounts of aluminium. CONCLUSIONS MTA Angelus and Micro Mega MTA contained small amounts of seven tested metal oxides. Bioaggregate only contained trace amounts of aluminium.

Bacterial entombment by intratubular mineralization following orthograde mineral trioxide aggregate obturation: a scanning electron microscopy study

The time domain entombment of bacteria by intratubular mineralization following orthograde canal obturation with mineral trioxide aggregate (MTA) was studied by scanning electron microscopy (SEM). Single-rooted human premolars (n=60) were instrumented to an apical size #50/0.06 using ProFile and treated as follows: Group 1 (n=10) was filled with phosphate buffered saline (PBS); Group 2 (n=10) was incubated with Enterococcus faecalis for 3 weeks, and then filled with PBS; Group 3 (n=20) was obturated orthograde with a paste of OrthoMTA (BioMTA, Seoul, Korea) and PBS; and Group 4 (n=20) was incubated with E. faecalis for 3 weeks and then obturated with OrthoMTA–PBS paste. Following their treatments, the coronal openings were sealed with PBS-soaked cotton and intermediate restorative material (IRM), and the roots were then stored in PBS for 1, 2, 4, 8 or 16 weeks. After each incubation period, the roots were split and their dentin/MTA interfaces examined in both longitudinal and horizontal directions by SEM. There appeared to be an increase in intratubular mineralization over time in the OrthoMTA-filled roots (Groups 3 and 4). Furthermore, there was a gradual entombment of bacteria within the dentinal tubules in the E. faecalis inoculated MTA-filled roots (Group 4). Therefore, the orthograde obturation of root canals with OrthoMTA mixed with PBS may create a favorable environment for bacterial entombment by intratubular mineralization.

Comparison of mandibular first molar mesial root canal morphology using micro-computed tomography and clearing technique

Abstract Objective. Micro-computed tomography (MCT) with alternative image reformatting techniques shows complex and detailed root canal anatomy. This study compared two-dimensional (2D) and 3D MCT image reformatting with standard tooth clearing for studying mandibular first molar mesial root canal morphology. Materials and methods. Extracted human mandibular first molar mesial roots (n = 31) were scanned by MCT (Skyscan 1172). 2D thin-slab minimum intensity projection (TS-MinIP) and 3D volume rendered images were constructed. The same teeth were then processed by clearing and staining. For each root, images obtained from clearing, 2D, 3D and combined 2D and 3D techniques were examined independently by four endodontists and categorized according to Vertucci’s classification. Fine anatomical structures such as accessory canals, intercanal communications and loops were also identified. Results. Agreement among the four techniques for Vertucci’s classification was 45.2% (14/31). The most frequent were Vertucci’s type IV and then type II, although many had complex configurations that were non-classifiable. Generally, complex canal systems were more clearly visible in MCT images than with standard clearing and staining. Fine anatomical structures such as intercanal communications, accessory canals and loops were mostly detected with a combination of 2D TS-MinIP and 3D volume-rendering MCT images. Conclusions. Canal configurations and fine anatomic structures were more clearly observed in the combined 2D and 3D MCT images than the clearing technique. The frequency of non-classifiable configurations demonstrated the complexity of mandibular first molar mesial root canal anatomy.

Effect of Conditioned Medium from Preameloblasts on Regenerative Cellular Differentiation of the Immature Teeth with Necrotic Pulp and Apical Periodontitis

INTRODUCTION The purpose of this study was to investigate the effect of conditioned medium (CM) from murine preameloblasts on the cellular differentiation of mesenchymal stem cells (MSCs) in immature teeth with necrotic pulp and apical periodontitis. METHODS Pulp necrosis and apical periodontitis were induced in 30 immature permanent double-rooted premolars of 3 beagles and were randomly assigned to the following treatment groups: group CM (n = 10), revascularization treatment was performed using CM from preameloblasts of C57BL/6 mice apical bud cells; group CR (n = 10), conventional revascularization treatment was performed; positive control group (n = 5), left infected; and negative control group (n = 5), untreated. The dogs were followed up for 12 weeks and assessed for treatment outcomes with radiographic and histologic analyses. The effect of the CM on sequential Runx2 and osterix messenger RNA gene expression during the differentiation of MG63 osteoblastlike cells was analyzed with real-time polymerase chain reaction. RESULTS The overall treatment outcomes were not significantly different between the 2 treatment groups. However, the teeth in the CM group showed significantly more mature apices and a higher degree of hard tissue formation with projections intercalating into the pre-existing root dentin (P < .05). In CM-treated teeth, regenerated pulplike tissue was more frequently observed (P < .05). During differentiation, the CM induced early peak expression of Runx2 followed by sustained osterix overexpression. CONCLUSIONS CM from preameloblasts rendered a favorable effect in providing a physiologic microenvironment for the differentiation of MSCs after revascularization treatment.

Antifungal effects of synthetic human β-defensin 3-C15 peptide

Objectives The purpose of this ex vivo study was to compare the antifungal activity of a synthetic peptide consisting of 15 amino acids at the C-terminus of human β-defensin 3 (HBD3-C15) with calcium hydroxide (CH) and Nystatin (Nys) against Candida albicans (C. albicans) biofilm. Materials and Methods C. albicans were grown on cover glass bottom dishes or human dentin disks for 48 hr, and then treated with HBD3-C15 (0, 12.5, 25, 50, 100, 150, 200, and 300 µg/mL), CH (100 µg/mL), and Nys (20 µg/mL) for 7 days at 37℃. On cover glass, live and dead cells in the biomass were measured by the FilmTracer Biofilm viability assay, and observed by confocal laser scanning microscopy (CLSM). On dentin, normal, diminished and ruptured cells were observed by field-emission scanning electron microscopy (FE-SEM). The results were subjected to a two-tailed t-test, a one way analysis variance and a post hoc test at a significance level of p = 0.05. Results C. albicans survival on dentin was inhibited by HBD3-C15 in a dose-dependent manner. There were fewer aggregations of C. albicans in the groups of Nys and HBD3-C15 (≥ 100 µg/mL). CLSM showed C. albicans survival was reduced by HBD3-C15 in a dose dependent manner. Nys and HBD3-C15 (≥ 100 µg/mL) showed significant fungicidal activity compared to CH group (p < 0.05). Conclusions Synthetic HBD3-C15 peptide (≥ 100 µg/mL) and Nys exhibited significantly higher antifungal activity than CH against C. albicans by inhibiting cell survival and biofilm.

Effect of 1440-nanometer neodymium:yttrium-aluminum-garnet laser irradiation on pain and neuropeptide reduction: a randomized prospective clinical trial.

INTRODUCTION The purpose of this study was to investigate the efficacy of a 1440-nm neodymium:yttrium-aluminum-garnet (Nd:YAG) laser on relieving pain in relation to the levels of inflammatory cytokine and neuropeptides in the root canal exudates of teeth with persistent symptomatic apical periodontitis. METHODS Forty teeth with persistent symptomatic apical periodontitis were randomly assigned to treatment groups: group L, intracanal irradiation of 1440-nm Nd:YAG laser with a 300-μm-diameter fiberoptic tip in addition to conventional root canal retreatment, and group C, conventional root canal re-treatment. The degrees of both spontaneous pain and the pain on percussion before and after treatment were recorded, and root canal exudate samples were collected to quantify the associated levels of substance P, calcitonin gene-related peptide (CGRP), and matrix metalloproteinase (MMP)-8 by immunoassay. RESULTS All of the measured parameters were significantly reduced in group L (P < .05), whereas the level of pain on percussion, CGRP, and MMP-8 were significantly reduced in group C (P < .05). The 1440-nm Nd:YAG laser had significantly better effect on the relief of pain on percussion and the reduction of substance P, CGRP, and MMP-8 levels. The visual analog scale scores of perceived pain correlated with pain-related neuropeptides and inflammatory cytokine levels in root canal exudates. CONCLUSIONS The 1440-nm Nd:YAG laser irradiation via fiberoptic tip to the teeth with persistent apical periodontitis provided promising consequences of pain and inflammation modulation.

Multivariate analysis of the cleaning efficacy of different final irrigation techniques in the canal and isthmus of mandibular posterior teeth

Objectives The aim of this study was to compare the cleaning efficacy of different final irrigation regimens in canal and isthmus of mandibular molars, and to evaluate the influence of related variables on cleaning efficacy of the irrigation systems. Materials and Methods Mesial root canals from 60 mandibular molars were prepared and divided into 4 experimental groups according to the final irrigation technique: Group C, syringe irrigation; Group U, ultrasonics activation; Group SC, VPro StreamClean irrigation; Group EV, EndoVac irrigation. Cross-sections at 1, 3 and 5 mm levels from the apex were examined to calculate remaining debris area in the canal and isthmus spaces. Statistical analysis was completed by using Kruskal-Wallis test and Mann-Whitney U test for comparison among groups, and multivariate linear analysis to identify the significant variables (regular replenishment of irrigant, vapor lock management, and ultrasonic activation of irrigant) affecting the cleaning efficacy of the experimental groups. Results Group SC and EV showed significantly higher canal cleanliness values than group C and U at 1 mm level (p < 0.05), and higher isthmus cleanliness values than group U at 3 mm and all levels of group C (p < 0.05). Multivariate linear regression analysis demonstrated that all variables had independent positive correlation at 1 mm level of canal and at all levels of isthmus with statistical significances. Conclusions Both VPro StreamClean and EndoVac system showed favorable result as final irrigation regimens for cleaning debris in the complicated root canal system having curved canal and/or isthmus. The debridement of the isthmi significantly depends on the variables rather than the canals.

Dynamic Intratubular Biomineralization Following Root Canal Obturation With Pozzolan-Based Mineral Trioxide Aggregate Sealer Cement

Summary The application of mineral trioxide aggregates (MTA) cement during the root canal obturation is gaining concern due to its bioactive characteristic to form an apatite in dentinal tubules. In this regard, this study was to assess the biomineralization of dentinal tubules following root canal obturation by using pozzolan‐based (Pz‐) MTA sealer cement (EndoSeal MTA, Maruchi). Sixty curved roots (mesiobuccal, distobuccal) from human maxillary molars were instrumented and prepared for root canal obturation. The canals were obturated with gutta‐percha (GP) and Pz‐MTA sealer by using continuous wave of condensation technique. Canals obturated solely with ProRoot MTA (Dentsply Tulsa Dental) or Pz‐MTA sealer were used for comparison. In order to evaluate the biomineralization ability under different conditions, the PBS pretreatment before the root canal obturation was performed in each additional samples. At dentin‐material interfaces, the extension of intratubular biomineralization was analyzed using scanning electron microscopy (SEM) and energy dispersive spectroscopy. When the root canal was obturated with GP and Pz‐MTA sealer, enhanced biomineralization of the dentinal tubules beyond the penetrated sealer tag was confirmed under the SEM observation (p < 0.05). Mineralized apatite structures (calcium/phosphorous ratio, 1.45–1.89) connecting its way through the dentinal tubules were detected at 350–400 μm from the tubule orifice, and the pre‐crystallization seeds were also observed along the intra‐ and/or inter‐tubular collagen fiber. Intratubular biomineralization depth was significantly enhanced in all PBS pretreated canals (p < 0.05). Pz‐MTA cement can be used as a promising bioactive root canal sealer to enhance biomineralization of dentinal tubules under controlled environment. SCANNING 38:50–56, 2016.

Autotransplantation of mesiodens for missing maxillary lateral incisor with cone‐beam CT‐fabricated model and orthodontics

AIM Autotransplantation is a viable treatment option for a missing tooth when there is a suitable donor, especially in adolescents with remaining facial growth. This report presents the aesthetic restoration of a missing maxillary lateral incisor through orthodontic treatment and autotransplantation of a mesiodens using a CBCT-fabricated rapid-prototyping model. SUMMARY A 14-year-old male patient with a congenitally missing maxillary lateral incisor was referred from the Department of Orthodontics. The teeth were moved orthodontically to regain space for the missing lateral incisor and to close the space of the mesiodens after transplantation. A replica of the donor tooth was fabricated from a cone-beam computed tomography scan through a rapid-prototyping machine before autotransplantation surgery. The model was used to create a socket for the graft tooth, thereby shortening the extra-oral time and minimizing the damage to the root surface. After transplantation and orthodontic tooth movement, the mesiodens was finally restored with an aesthetic laminate restoration. Over 3 years, the aesthetics remained excellent, and the transplant functioned normally without any signs or symptoms of root resorption. KEY LEARNING POINT Missing anterior teeth may be replaced through a combination of orthodontics, autotransplantation with a rapid-prototyping model and prosthodontic restoration, in growing patients.