Yi-Yu Chen

Covalent Immobilization of Bacillus licheniformis γ-Glutamyl Transpeptidase on Aldehyde-Functionalized Magnetic Nanoparticles

This work presents the synthesis and use of surface-modified iron oxide nanoparticles for the covalent immobilization of Bacillus licheniformis γ-glutamyl transpeptidase (BlGGT). Magnetic nanoparticles were prepared by an alkaline solution of divalent and trivalent iron ions, and they were subsequently treated with 3-aminopropyltriethoxysilane (APES) to obtain the aminosilane-coated nanoparticles. The functional group on the particle surface and the amino group of BlGGT was then cross-linked using glutaraldehyde as the coupling reagent. The loading capacity of the prepared nanoparticles for BlGGT was 34.2 mg/g support, corresponding to 52.4% recovery of the initial activity. Monographs of transmission electron microscopy revealed that the synthesized nanoparticles had a mean diameter of 15.1 ± 3.7 nm, and the covalent cross-linking of the enzyme did not significantly change their particle size. Fourier transform infrared spectroscopy confirmed the immobilization of BlGGT on the magnetic nanoparticles. The chemical and kinetic behaviors of immobilized BlGGT are mostly consistent with those of the free enzyme. The immobilized enzyme could be recycled ten times with 36.2% retention of the initial activity and had a comparable stability respective to free enzyme during the storage period of 30 days. Collectively, the straightforward synthesis of aldehyde-functionalized nanoparticles and the efficiency of enzyme immobilization offer wide perspectives for the practical use of surface-bound BlGGT.

Surface-Functionalized Hyperbranched Poly(Amido Acid) Magnetic Nanocarriers for Covalent Immobilization of a Bacterial γ-Glutamyltranspeptidase

In this study, we synthesized water-soluble hyperbranched poly(amido acid)s (HBPAAs) featuring multiple terminal CO2H units and internal tertiary amino and amido moieties and then used them in conjunction with an in situ Fe2+/Fe3+ co-precipitation process to prepare organic/magnetic nanocarriers comprising uniformly small magnetic iron oxide nanoparticles (NP) incorporated within the globular HBPAAs. Transmission electron microscopy revealed that the HBPAA-γ-Fe2O3 NPs had dimensions of 6–11 nm, significantly smaller than those of the pristine γ-Fe2O3 (20–30 nm). Subsequently, we covalently immobilized a bacterial γ-glutamyltranspeptidase (BlGGT) upon the HBPAA-γ-Fe2O3 nanocarriers through the formation of amide linkages in the presence of a coupling agent. Magnetization curves of the HBPAA-γ-Fe2O3/BlGGT composites measured at 300 K suggested superparamagnetic characteristics, with a saturation magnetization of 52 emu g−1. The loading capacity of BlGGT on the HBPAA-γ-Fe2O3 nanocarriers was 16 mg g−1 support; this sample provided a 48% recovery of the initial activity. The immobilized enzyme could be recycled 10 times with 32% retention of the initial activity; it had stability comparable with that of the free enzyme during a storage period of 63 days. The covalent immobilization and stability of the enzyme and the magnetization provided by the HBPAA-γ-Fe2O3 NPs suggests that this approach could be an economical means of depositing bioactive enzymes upon nanocarriers for BlGGT-mediated bio-catalysis.

Biophysical characterization of Bacillus licheniformis and Escherichia coli γ-glutamyltranspeptidases: A comparative analysis

The oligomeric states of Bacillus licheniformis and Escherichia coli γ-glutamyltranspeptidases (BlGGT and EcGGT) in solution have been investigated by analytical ultracentrifugation. The results showed that BlGGT has a sedimentation coefficient of 5.12S, which can be transformed into an experimental molecular mass of approximately 62,680Da. The monomeric conformation is conserved in EcGGT. SDS-PAGE analysis and cross-linking studies further proved that the autocatalytically processed BlGGT and EcGGT form a heterodimeric association. Unfolding analyses using circular dichroism and tryptophan emission fluorescence revealed that these two proteins had a different sensitivity towards temperature- and guanidine hydrochloride (GdnHCl)-induced denaturation. BlGGT and EcGGT had a T(m) value of 59.5 and 49.2°C, respectively, and thermal unfolding of both proteins was found to be highly irreversible. Chemical unfolding of BlGGT was independent to the pH value ranging from 5 to 10, whereas the pH environment was found to significantly influence the GdnHCl-induced denaturation of EcGGT. Both enzymes did not reactivate from the completely unfolded states, accessible at 6M GdnHCl. BlGGT was active in the presence of 4M NaCl, whereas the activity of EcGGT was significantly decreased at the high-salt condition. Taken together, these findings suggest that the biophysical properties of the homologous GGTs from two mesophilic sources are quite different.

Low resolution X-ray structure of γ-glutamyltranspeptidase from Bacillus licheniformis: Opened active site cleft and a cluster of acid residues potentially involved in the recognition of a metal ion

γ-Glutamyltranspeptidases (γ-GTs) cleave the γ-glutamyl amide bond of glutathione and transfer the released γ-glutamyl group to water (hydrolysis) or acceptor amino acids (transpeptidation). These ubiquitous enzymes play a key role in the biosynthesis and degradation of glutathione, and in xenobiotic detoxification. Here we report the 3Å resolution crystal structure of Bacillus licheniformis γ-GT (BlGT) and that of its complex with l-Glu. X-ray structures confirm that BlGT belongs to the N-terminal nucleophilic hydrolase superfamily and reveal that the protein possesses an opened active site cleft similar to that reported for the homologous enzyme from Bacillus subtilis, but different from those observed for human γ-GT and for γ-GTs from other microorganisms. Data suggest that the binding of l-Glu induces a reordering of the C-terminal tail of BlGT large subunit and allow the identification of a cluster of acid residues that are potentially involved in the recognition of a metal ion. The role of these residues on the conformational stability of BlGT has been studied by characterizing the autoprocessing, enzymatic activity, chemical and thermal denaturation of four new Ala single mutants. The results show that replacement of Asp568 with an Ala affects both the autoprocessing and structural stability of the protein.

Enzymatic synthesis of γ-l-glutamyl-S-allyl-l-cysteine, a naturally occurring organosulfur compound from garlic, by Bacillus licheniformis γ-glutamyltranspeptidase

In the practical application of Bacillus licheniformis γ-glutamyltranspeptidase (BlGGT), we describe a straightforward enzymatic synthesis of γ-L-glutamyl-S-allyl-L-cysteine (GSAC), a naturally occurring organosulfur compound found in garlic, based on a transpeptidation reaction involving glutamine as the γ-glutamyl donor and S-allyl-L-cysteine as the acceptor. With the help of thin layer chromatography technique and computer-assisted image analysis, we performed the quantitative determination of GSAC. The optimum conditions for a biocatalyzed synthesis of GSAC were 200 mM glutamine, 200 mM S-allyl-L-cysteine, 50 mM Tris-HCl buffer (pH 9.0), and BlGGT at a final concentration of 1.0 U/mL. After a 15-h incubation of the reaction mixture at 60 °C, the GSAC yield for the free and immobilized enzymes was 19.3% and 18.3%, respectively. The enzymatic synthesis of GSAC was repeated under optimal conditions at 1-mmol preparative level. The reaction products together with the commercially available GSAC were further subjected to an ESI-MS/MS analysis. A significant signal with m/z of 291.1 and the protonated fragments at m/z of 73.0, 130.1, 145.0, and 162.1 were observed in the positive ESI-MS/MS spectrum, which is consistent with those of the standard compound. These results confirm the successful synthesis of GSAC from glutamine and S-allyl-L-cysteine by BlGGT.

The maturation mechanism of γ-glutamyl transpeptidases: Insights from the crystal structure of a precursor mimic of the enzyme from Bacillus licheniformis and from site-directed mutagenesis studies

γ-Glutamyl transpeptidases (γ-GTs) are members of N-terminal nucleophile hydrolase superfamily. They are synthetized as single-chain precursors, which are then cleaved to form mature enzymes. Basic aspects of autocatalytic processing of these pro-enzymes are still unknown. Here we describe the X-ray structure of the precursor mimic of Bacillus licheniformis γ-GT (BlGT), obtained by mutating catalytically important threonine to alanine (T399A-BlGT), and report results of autoprocessing of mutants of His401, Thr415, Thr417, Glu419 and Arg571. Data suggest that Thr417 is in a competent position to activate the catalytic threonine (Thr399) for nucleophilic attack of the scissile peptide bond and that Thr415 plays a major role in assisting the process. On the basis of these new structural results, a possible mechanism of autoprocessing is proposed. This mechanism, which guesses the existence of a six-membered transition state involving one carbonyl and two hydroxyl groups, is in agreement with all the available experimental data collected on γ-GTs from different species and with our new Ala-scanning mutagenesis data.

Experimental evidence for the involvement of amino acid residue Glu398 in the autocatalytic processing of Bacillus licheniformis γ-glutamyltranspeptidase

The role of glutamate 398 in the autocatalytic processing of Bacillus licheniformis γ‐glutamyltranspeptidase (BlGGT) was explored by site‐directed mutagenesis. This glutamate was substituted by either alanine, aspartate, arginine or glutamine and the expressed mutant enzymes were purified to apparent homogeneity with metal‐affinity chromatography. SDS–PAGE analysis showed that E398A, E398D and E398K were unable to process themselves into a large and a small subunit. However, E398Q was not only able to process itself, but also had a catalytic activity comparable to that of BlGGT. As compared with the wild‐type enzyme, no significant change in circular dichroism spectra was observed for the mutant proteins. Thermal unfolding of BlGGT, E398A, E398D, E398K and E398Q followed the two‐state unfolding process with a transition point (T m) of 47.7–69.4 °C. Tryptophan fluorescence spectra of the mutant enzymes were different from the wild‐type protein in terms of fluorescence intensity. Native BlGGT started to unfold beyond ∼1.92 M guanidine hydrochloride (GdnHCl) and reached an unfolded intermediate, [GdnHCl]0.5, N–U, at 3.07 M equivalent to free energy change ( Δ ⁢ G N − U H 2 ⁢ O ) of 14.53 kcal/mol for the N → U process, whereas the denaturation midpoints for the mutant enzymes were 1.31–2.99 M equivalent to Δ ⁢ G N − U H 2 ⁢ O of 3.29–12.05 kcal/mol. Taken together, these results strongly suggest that the explored glutamate residue is indeed important for the autocatalytic processing of BlGGT.

γ-Glutamyl transpeptidase architecture: Effect of extra sequence deletion on autoprocessing, structure and stability of the protein from Bacillus licheniformis

γ-Glutamyl transpeptidases (γ-GTs, EC 2.3.2.2) are a class of ubiquitous enzymes which initiate the cleavage of extracellular glutathione (γ-Glu-Cys-Gly, GSH) into its constituent glutamate, cysteine, and glycine and catalyze the transfer of its γ-glutamyl group to water (hydrolysis), amino acids or small peptides (transpeptidation). These proteins utilize a conserved Thr residue to process their chains into a large and a small subunit that then form the catalytically competent enzyme. Multiple sequence alignments have shown that some bacterial γ-GTs, including that from Bacillus licheniformis (BlGT), possess an extra sequence at the C-terminal tail of the large subunit, whose role is unknown. Here, autoprocessing, structure, catalytic activity and stability against both temperature and the chemical denaturant guanidinium hydrochloride of six BlGT extra-sequence deletion mutants have been characterized by SDS-PAGE, circular dichroism, intrinsic fluorescence and homology modeling. Data suggest that the extra sequence has a crucial role in enzyme activation and structural stability. Our results assist in the development of a structure-based interpretation of the autoprocessing reaction of γ-GTs and are helpful to unveil the molecular bases of their structural stability.

Biocatalytic Synthesis of γ-glutamyl-L-leucine, a Kokumi-Imparting Dipeptide, by Bacillus licheniformis γ-Glutamyltranspeptidase

ABSTRACT Several γ-glutamyl compounds are known to have favorable features for a variety of biotechnological and pharmaceutical applications. However, so far only a limited number of γ-glutamyl compounds have been synthesized through γ-glutamyltranspeptidase (GGT). With the help of thin layer chromatography and computer-assisted image analysis techniques, we performed an enzymatic method involving Bacillus licheniformis GGT (BlGGT) for the synthesis of γ-glutamyl-L-leucine (γ-Glu-Leu). The optimum conditions for a biocatalytic synthesis of γ-Glu-Leu were determined to be 200 mM glutamine, 200 mM leucine, 50 mM Tris-HCl buffer (pH 9.0), and BlGGT at a working concentration of 2.0 U/mL. Upon a 5-h incubation of the reaction mixture at 50°C, the product yield could reach approximately 52%. The preparative synthesis of γ-Glu-Leu by BlGGT was done under optimal conditions at millimol scale level. The reaction products were subjected to mass spectrometry/nuclear magnetic resonance analyses to ensure the successful synthesis of γ-Glu-Leu. Taken together, the present study demonstrates the high potentiality of BlGGT-catalyzed reaction in the synthesis of γ-glutamyl compounds.