Yibin Ying

Simultaneous determination of ascorbic acid, dopamine and uric acid using high-performance screen-printed graphene electrode.

A disposable and sensitive screen-printed electrode using an ink containing graphene was developed. This electrode combined the advantages of graphene and the disposable characteristic of electrode, which possessed wide potential window, low background current and fast electron transfer kinetics. Compared with the electrodes made from other inks, screen-printed graphene electrode (SPGNE) showed excellent electrocatalytic activity for the oxidation of ascorbic acid (AA), dopamine (DA), and uric acid (UA). Three well-defined sharp and fully resolved anodic peaks were found at the developed electrode. Differential pulse voltammetry was used to simultaneous determination of AA, DA, and UA in their ternary mixture. In the co-existence system of these three species, the linear response ranges for the determination of AA, DA, and UA were 4.0-4500 μM, 0.5-2000 μM, and 0.8-2500 μM, respectively. The detection limits (S/N=3) were found to be 0.95 μM, 0.12 μM, and 0.20 μM for the determination of AA, DA, and UA, respectively. Furthermore, the SPGNE displayed high reproducibility and stability for these species determination. The feasibility of the developed electrode for real sample analysis was investigated. Results showed that the SPGNE could be used as a sensitive and selective sensor for simultaneous determination of AA, DA, and UA in biological samples, which may provide a promising alternative in routine sensing applications.

Direct electrochemical reduction of graphene oxide on ionic liquid doped screen-printed electrode and its electrochemical biosensing application.

A novel electrochemical biosensing platform using electrochemically reduced graphene oxide (ER-GNO) modified electrode was proposed. This modified electrode was prepared by one-step electrodeposition of the exfoliated GNO sheets onto the ionic liquid doped screen-printed electrode (IL-SPE). The resulting ER-GNO/IL-SPE brought new capabilities for electrochemical devices by combining the advantages of ER-GNO and disposable electrode. Two important biomolecules, nicotinamide adenine dinucleotide (NADH) and hydrogen peroxide (H(2)O(2)), were employed to study the electrochemical performance of the ER-GNO/IL-SPE, which exhibited more favorable electron transfer kinetics than the bare IL-SPE. On the basis of the greatly enhanced electrochemical reactivity of H(2)O(2) at the developed electrode, ER-GNO and glucose oxidase constructed disposable biosensor showed better analytical performance for the glucose detection compared with the IL-SPE based biosensor. The linear range for the detection of glucose was from 5.0 μM to 12.0 mM with a detection limit of 1.0 μM. This work provides a useful avenue for implementing ER-GNO as a new generation of electrochemical transducer in disposable electrode, which could expand the scope of graphene constructed electrochemical biosensing devices and hold great promise for routine sensing applications.

Immunosensors for detection of pesticide residues

Immunosensors are biosensors that use antibodies or antigens as the specific sensing element and provide concentration-dependent signals. There is great potential in the applications of immunosensing technologies for rapid detection of pesticide residues in food and environment. This paper presents an overview of various transduction systems, such as electrochemical, optical, piezoelectric, and nanomechanics methods, which have been reported in the literature in the design and fabrication of immunosensors for pesticide detection. Various immobilization protocols used for formation of a biorecognition interface are also discussed. In addition, techniques of regeneration, signal amplification, miniaturization, and antibodies are evaluated for the development and applications of these immunosensors. It can be concluded that despite some limitations of the immunosensing technologies, these immuosensors for pesticide monitoring are becoming more and more relevant in environmental and food analysis.

New Trends in Impedimetric Biosensors for the Detection of Foodborne Pathogenic Bacteria

The development of a rapid, sensitive, specific method for the foodborne pathogenic bacteria detection is of great importance to ensure food safety and security. In recent years impedimetric biosensors which integrate biological recognition technology and impedance have gained widespread application in the field of bacteria detection. This paper presents an overview on the progress and application of impedimetric biosensors for detection of foodborne pathogenic bacteria, particularly the new trends in the past few years, including the new specific bio-recognition elements such as bacteriophage and lectin, the use of nanomaterials and microfluidics techniques. The applications of these new materials or techniques have provided unprecedented opportunities for the development of high-performance impedance bacteria biosensors. The significant developments of impedimetric biosensors for bacteria detection in the last five years have been reviewed according to the classification of with or without specific bio-recognition element. In addition, some microfluidics systems, which were used in the construction of impedimetric biosensors to improve analytical performance, are introduced in this review.

Self‐Assembly of Single‐Layer CoAl‐Layered Double Hydroxide Nanosheets on 3D Graphene Network Used as Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

A non-noble metal based 3D porous electrocatalyst is prepared by self-assembly of the liquid-exfoliated single-layer CoAl-layered double hydroxide nanosheets (CoAl-NSs) onto 3D graphene network, which exhibits higher catalytic activity and better stability for electrochemical oxygen evolution reaction compared to the commercial IrO2 nanoparticle-based 3D porous electrocatalyst.

Impedimetric immunosensor based on gold nanoparticles modified graphene paper for label-free detection of Escherichia coli O157:H7.

In this study, a low-cost and robust impedimetric immunosensor based on gold nanoparticles modified free-standing graphene paper electrode for rapid and sensitive detection of Escherichia coli O157:H7 (E. coli O157:H7) was developed. Graphene paper was prepared by chemical reduction of graphene oxide paper obtained from vacuum filtration method. Scanning electron microscope, Raman spectroscopy and X-ray diffraction techniques were employed to investigate the surface morphology and crystal structure of the prepared graphene paper. The gold nanoparticles were grown on the surface of graphene paper electrode by one-step electrodeposition technique. The immobilization of anti-E. coli O157:H7 antibodies on paper electrode were performed via biotin-streptavidin system. Electrochemical impedance spectroscopy was used to detect E. coli O157:H7 captured on the paper electrode. Results show that the developed paper immunosensor possesses greatly enhanced sensing performance, such as wide linear range (1.5 × 10(2)-1.5 × 10(7) cfu mL(-1)), low detection limit (1.5 × 10(2) cfu mL(-1)), and excellent specificity. Furthermore, flexible test demonstrate the graphene paper based sensing device has high tolerability to mechanical stress. The strategy of structurally integrating metal nanomaterials, graphene paper, and biorecognition molecules would provide new insight into design of flexible immunosensors for routine sensing applications.

Monitoring of Escherichia coli O157:H7 in food samples using lectin based surface plasmon resonance biosensor.

A novel surface plasmon resonance (SPR) biosensor using lectin as bioreceptor was developed for the rapid detection of Escherichia coli (E. coli) O157:H7. The selective interaction of lectins with carbohydrate components from bacterial cells surface was used as the recognition principle for the detection. Five types of lectins from Triticum vulgaris, Canavailia ensiformis, Ulex europaeus, Arachis hypogaea, and Maackia amurensis, were employed to evaluate the selectivity of the approach for binding E. coli O157:H7 effectively. A detection limit of 3×10(3) cfu mL(-1) was obtained for determination of E. coli O157:H7 when used the lectin from T. vulgaris as the binding molecule. Furthermore, the proposed biosensor was used to detect E. coli O157:H7 in real food samples. Results showed that the lectin based SPR biosensor was sensitive, reliable and effective for detection of E. coli O157:H7, which hold a great promise in food safety analysis.

Application of Electrochemically Reduced Graphene Oxide on Screen-Printed Ion-Selective Electrode

In this study, a novel disposable all-solid-state ion-selective electrode using graphene as the ion-to-electron transducer was developed. The graphene film was prepared on screen-printed electrode directly from the graphene oxide dispersion by a one-step electrodeposition technique. Cyclic voltammetry and electrochemical impedance spectroscopy were employed to demonstrate the large double layer capacitance and fast charge transfer of the graphene film modified electrode. On the basis of these excellent properties, an all-solid-state calcium ion-selective electrode as the model was constructed using the calcium ion-selective membrane and graphene film modified electrode. The mechanism about the graphene promoting the ion-to-electron transformation was investigated in detail. The disposable electrode exhibited a Nernstian slope (29.1 mV/decade), low detection limit (10(-5.8) M), and fast response time (less than 10 s). With the high hydrophobic character of graphene materials, no water film was formed between the ion-selective membrane and the underlying graphene layer. Further studies revealed that the developed electrode was insensitive to light, oxygen, and redox species. The use of the disposable electrode for real sample analysis obtained satisfactory results, which made it a promising alternative in routine sensing applications.

A simple and rapid optical biosensor for detection of aflatoxin B1 based on competitive dispersion of gold nanorods.

This report illustrates a promising one-step and label-free optical biosensor for determination of aflatoxin B1 (AFB1) that is most commonly found in foods and highly dangerous even at very low concentrations. In this research, gold nanorods (GNRs) were employed as a sensing platform, which showed high stability under high ionic strength conditions without addition of any stabilizing agent. GNR-AFB1-BSA (bovine serum albumin) conjugates aggregated after mixing with free antibodies, resulting in significant changes in absorption intensity. At the same time the existence of AFB1 molecules in samples caused dispersion of nanorods, as a result of competitive immune-reaction with antibodies. By taking advantages of the competitive dispersion of GNRs, the developed method could effectively reduce false results caused by undesirable aggregation, which is a big problem for spherical gold nanoparticles. Absorption intensity of UV-vis spectra served as the sensing indicator, with dynamic light scattering (DLS) measurement as another sensing tool. The designed biosensing system could detect AFB1 in a linear range from 0.5 to 20ngmL(-1), with a good correlation coefficient of 0.99. And the limit of detection (LOD) was 0.16ngmL(-1), indicating an excellent sensitivity with absorbance result. The recoveries of the spiked AFB1 in real peanut samples ranged from 94.2% to 117.3%. Therefore the proposed nano-biosensor was demonstrated to be sensitive, selective, and simple, providing a viable alternative for rapid screening of toxins in agriculture products and foods.

Development of an electrochemically reduced graphene oxide modified disposable bismuth film electrode and its application for stripping analysis of heavy metals in milk

A novel electrochemical sensing platform based on electrochemically reduced graphene oxide film modified screen-printed electrode was developed. This disposable electrode shows excellent conductivity and fast electron transfer kinetics. By in situ plating bismuth film, the developed electrode exhibited well-defined and separate stripping peaks for cadmium and lead. Several parameters, including electrolytes environment and electrodeposition conditions, were carefully optimized to achieve best stripping performance. The linear range for both metal ions at the disposable bismuth film electrode was from 1.0 μg L(-1) to 60.0 μg L(-1). The detection limit was 0.5 μg L(-1) for cadmium ion and 0.8 μg L(-1) for lead ion. Milk sample analysis demonstrates that the developed electrode could be effectively used to detect low levels (μg L(-1)) of cadmium ion and lead ion. Graphene based disposable bismuth film electrode is a sensitive, stable, and reliable sensing platform for heavy metals determination.