Yifan Ye

Enabling unassisted solar water splitting by iron oxide and silicon

Photoelectrochemical (PEC) water splitting promises a solution to the problem of large-scale solar energy storage. However, its development has been impeded by the poor performance of photoanodes, particularly in their capability for photovoltage generation. Many examples employing photovoltaic modules to correct the deficiency for unassisted solar water splitting have been reported to-date. Here we show that, by using the prototypical photoanode material of haematite as a study tool, structural disorders on or near the surfaces are important causes of the low photovoltages. We develop a facile re-growth strategy to reduce surface disorders and as a consequence, a turn-on voltage of 0.45 V (versus reversible hydrogen electrode) is achieved. This result permits us to construct a photoelectrochemical device with a haematite photoanode and Si photocathode to split water at an overall efficiency of 0.91%, with NiFeOx and TiO2/Pt overlayers, respectively.

Safe and Durable High-Temperature Lithium–Sulfur Batteries via Molecular Layer Deposited Coating

Lithium-sulfur (Li-S) battery is a promising high energy storage candidate in electric vehicles. However, the commonly employed ether based electrolyte does not enable to realize safe high-temperature Li-S batteries due to the low boiling and flash temperatures. Traditional carbonate based electrolyte obtains safe physical properties at high temperature but does not complete reversible electrochemical reaction for most Li-S batteries. Here we realize safe high temperature Li-S batteries on universal carbon-sulfur electrodes by molecular layer deposited (MLD) alucone coating. Sulfur cathodes with MLD coating complete the reversible electrochemical process in carbonate electrolyte and exhibit a safe and ultrastable cycle life at high temperature, which promise practicable Li-S batteries for electric vehicles and other large-scale energy storage systems.

Explaining the Size Dependence in Platinum-Nanoparticle-Catalyzed Hydrogenation Reactions.

Hydrogenation reactions are industrially important reactions that typically require unfavorably high H2 pressure and temperature for many functional groups. Herein we reveal surprisingly strong size-dependent activity of Pt nanoparticles (PtNPs) in catalyzing this reaction. Based on unambiguous spectral analyses, the size effect has been rationalized by the size-dependent d-band electron structure of the PtNPs. This understanding enables production of a catalyst with size of 1.2 nm, which shows a sixfold increase in turnover frequency and 28-fold increase in mass activity in the regioselective hydrogenation of quinoline, compared with PtNPs of 5.3 nm, allowing the reaction to proceed under ambient conditions with unprecedentedly high reaction rates. The size effect and the synthesis strategy developed herein may provide a general methodology in the design of metal-nanoparticle-based catalysts for a broad range of organic syntheses.

Interrelationships among Grain Size, Surface Composition, Air Stability, and Interfacial Resistance of Al-Substituted Li7La3Zr2O12 Solid Electrolytes

The interfacial resistances of symmetrical lithium cells containing Al-substituted Li7La3Zr2O12 (LLZO) solid electrolytes are sensitive to their microstructures and histories of exposure to air. Air exposure of LLZO samples with large grain sizes (∼150 μm) results in dramatically increased interfacial impedances in cells containing them, compared to those with pristine large-grained samples. In contrast, a much smaller difference is seen between cells with small-grained (∼20 μm) pristine and air-exposed LLZO samples. A combination of soft X-ray absorption (sXAS) and Raman spectroscopy, with probing depths ranging from nanometer to micrometer scales, revealed that the small-grained LLZO pellets are more air-stable than large-grained ones, forming far less surface Li2CO3 under both short- and long-term exposure conditions. Surface sensitive X-ray photoelectron spectroscopy (XPS) indicates that the better chemical stability of the small-grained LLZO is related to differences in the distribution of Al and Li at sample surfaces. Density functional theory calculations show that LLZO can react via two different pathways to form Li2CO3. The first, more rapid, pathway involves a reaction with moisture in air to form LiOH, which subsequently absorbs CO2 to form Li2CO3. The second, slower, pathway involves direct reaction with CO2 and is favored when surface lithium contents are lower, as with the small-grained samples. These observations have important implications for the operation of solid-state lithium batteries containing LLZO because the results suggest that the interfacial impedances of these devices is critically dependent upon specific characteristics of the solid electrolyte and how it is prepared.

High-performance hybrid oxide catalyst of manganese and cobalt for low-pressure methanol synthesis

Carbon dioxide capture and use as a carbon feedstock presents both environmental and industrial benefits. Here we report the discovery of a hybrid oxide catalyst comprising manganese oxide nanoparticles supported on mesoporous spinel cobalt oxide, which catalyses the conversion of carbon dioxide to methanol at high yields. In addition, carbon-carbon bond formation is observed through the production of ethylene. We document the existence of an active interface between cobalt oxide surface layers and manganese oxide nanoparticles by using X-ray absorption spectroscopy and electron energy-loss spectroscopy in the scanning transmission electron microscopy mode. Through control experiments, we find that the catalysts chemical nature and architecture are the key factors in enabling the enhanced methanol synthesis and ethylene production. To demonstrate the industrial applicability, the catalyst is also run under high conversion regimes, showing its potential as a substitute for current methanol synthesis technologies.

Enhanced Photoreversible Color Switching of Redox Dyes Catalyzed by Barium-Doped TiO2 Nanocrystals†

Colloidal barium-doped TiO2 nanocrystals have been developed that enable the highly reversible light-responsive color switching of redox dyes with excellent cycling performance and high switching rates. Oxygen vacancies resulting from the Ba doping serve as effective sacrificial electron donors (SEDs) to scavenge the holes photogenerated in TiO2 nanocrystals under UV irradiation and subsequently promote the reduction of methylene blue to its colorless leuco form. Effective color switching can therefore be realized without relying on external SEDs, thus greatly increasing the number of switching cycles. Ba doping can also accelerate the recoloration under visible-light irradiation by shifting the absorption edge of TiO2 nanocrystals to a shorter wavelength. Such a system can be further casted into a solid film to produce a rewritable paper on which letters and patters can be repeatedly printed using UV light and then erased by heating; this process can be repeated for many cycles and does not require additional inks.

Photocatalytic Color Switching of Transition Metal Hexacyanometalate Nanoparticles for High-Performance Light-Printable Rewritable Paper

Developing efficient photoreversible color switching systems for constructing rewritable paper is of significant practical interest owing to the potential environmental benefits including forest conservation, pollution reduction, and resource sustainability. Here we report that the color change associated with the redox chemistry of nanoparticles of Prussian blue and its analogues could be integrated with the photocatalytic activity of TiO2 nanoparticles to construct a class of new photoreversible color switching systems, which can be conveniently utilized for fabricating ink-free, light printable rewritable paper with various working colors. The current system also addresses the phase separation issue of the previous organic dye-based color switching system so that it can be conveniently applied to the surface of conventional paper to produce an ink-free light printable rewritable paper that has the same feel and appearance as the conventional paper. With its additional advantages such as excellent scalability and outstanding rewriting performance (reversibility >80 times, legible time >5 days, and resolution >5 μm), this novel system can serve as an eco-friendly alternative to regular paper in meeting the increasing global needs for environment protection and resource sustainability.

X-ray Absorption Spectroscopy Characterization of a Li/S Cell

The X-ray absorption spectroscopy technique has been applied to study different stages of the lithium/sulfur (Li/S) cell life cycle. We have investigated how speciation of S in Li/S cathodes changes upon the introduction of CTAB (cetyltrimethylammonium bromide, CH3(CH2)15N+(CH3)3Br−) and with charge/discharge cycling. The introduction of CTAB changes the synthesis reaction pathway dramatically due to the interaction of CTAB with the terminal S atoms of the polysulfide ions in the Na2Sx solution. For the cycled Li/S cell, the loss of electrochemically active sulfur and the accumulation of a compact blocking insulating layer of unexpected sulfur reaction products on the cathode surface during the charge/discharge processes make the capacity decay. A modified coin cell and a vacuum-compatible three-electrode electro-chemical cell have been introduced for further in-situ/in-operando studies.

Stable iridium dinuclear heterogeneous catalysts supported on metal-oxide substrate for solar water oxidation.

Significance While research on single-atom catalysts (SACs) is arguably mature, rare work has been done on atomically dispersed catalyst featuring two atoms. We synthesized Ir dinuclear heterogeneous catalyst in a facile photochemical way. It exhibits outstanding stability and high activity toward water oxidation. The significance of this work can also be appreciated from the catalysis perspective. A grand challenge in heterogeneous catalysis is how to understand the detailed mechanisms at the molecular level, because the most active heterogeneous catalysts are often poorly defined in their atomic structures. Our finding is built upon recent advances aimed at studying SACs but takes a crucial step forward. It provides a material platform to study reactions that would require more than one active site. Atomically dispersed catalysts refer to substrate-supported heterogeneous catalysts featuring one or a few active metal atoms that are separated from one another. They represent an important class of materials ranging from single-atom catalysts (SACs) and nanoparticles (NPs). While SACs and NPs have been extensively reported, catalysts featuring a few atoms with well-defined structures are poorly studied. The difficulty in synthesizing such structures has been a critical challenge. Here we report a facile photochemical method that produces catalytic centers consisting of two Ir metal cations, bridged by O and stably bound to a support. Direct evidence unambiguously supporting the dinuclear nature of the catalysts anchored on α-Fe2O3 is obtained by aberration-corrected scanning transmission electron microscopy (AC-STEM). Experimental and computational results further reveal that the threefold hollow binding sites on the OH-terminated surface of α-Fe2O3 anchor the catalysts to provide outstanding stability against detachment or aggregation. The resulting catalysts exhibit high activities toward H2O photooxidation.

Interaction of oxygen with samarium on Al2O3 thin film grown on Ni3Al(111)

The interaction between oxygen and samarium (Sm) on the well-ordered thin Al2O3 film grown on Ni3Al(111) has been investigated by X-ray photoelectron spectroscopy and synchrotron radiation photoemission spectroscopy. At Sm coverage higher than one monolayer, exposure of oxygen to the Sm films at room temperature leads to the formation of both samarium peroxide (O2(2-)) states and regular samarium oxide (O(2-)) states. By contrast, when exposing O2 to Sm film less than one monolayer on Al2O3, no O2(2-) can be observed. Upon heating to higher temperatures, these metastable O2(2-) states dissociate, supplying active O atoms which can diffuse through the Al2O3 thin film to further oxidize the underlying Ni3Al(111) substrate, leading to the significant increase of the Al2O3 thin film thickness. Therefore, it can be concluded that Sm, presumably in its peroxide form, acts as a catalyst for the further oxidation of the Ni3Al substrate by supplying the active oxygen species at elevated temperatures.