Yiming Cao

High-performance dye-sensitized solar cells based on solvent-free electrolytes produced from eutectic melts

Low-cost excitonic solar cells based on organic optoelectronic materials are receiving an ever-increasing amount of attention as potential alternatives to traditional inorganic photovoltaic devices. In this rapidly developing field, the dye-sensitized solar cell (DSC) has achieved so far the highest validated efficiency of 11.1% (ref. 2) and remarkable stability. However, the cells with the best performance use volatile solvents in their electrolytes, which may be prohibitive for outdoor solar panels in view of the need for robust encapsulation. Solvent-free room-temperature ionic liquids have been pursued as an attractive solution to this dilemma, and device efficiencies of over 7% were achieved by using some low-viscosity formulations containing 1-ethyl-3-methylimidazolium thiocyanate, selenocyanate, tricyanomethide or tetracyanoborate. Unfortunately, apart from tetracyanoborate, all of these low-viscosity melts proved to be unstable under prolonged thermal stress and light soaking. Here, we introduce the concept of using eutectic melts to produce solvent-free liquid redox electrolytes. Using a ternary melt in conjunction with a nanocrystalline titania film and the amphiphilic heteroleptic ruthenium complex Z907Na (ref. 10) as a sensitizer, we reach excellent stability and an unprecedented efficiency of 8.2% under air-mass 1.5 global illumination. Our results are of importance to realize large-scale outdoor applications of mesoscopic DSCs.

11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials

Solid-state dye-sensitized solar cells currently suffer from issues such as inadequate nanopore filling, low conductivity and crystallization of hole-transport materials infiltrated in the mesoscopic TiO2 scaffolds, leading to low performances. Here we report a record 11% stable solid-state dye-sensitized solar cell under standard air mass 1.5 global using a hole-transport material composed of a blend of [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)2](bis(trifluoromethylsulfonyl)imide)2 and [Cu (4,4′,6,6′-tetramethyl-2,2′-bipyridine)2](bis(trifluoromethylsulfonyl)imide). The amorphous Cu(II/I) conductors that conduct holes by rapid hopping infiltrated in a 6.5 μm-thick mesoscopic TiO2 scaffold are crucial for achieving such high efficiency. Using time-resolved laser photolysis, we determine the time constants for electron injection from the photoexcited sensitizers Y123 into the TiO2 and regeneration of the Y123 by Cu(I) to be 25 ps and 3.2 μs, respectively. Our work will foster the development of low-cost solid-state photovoltaic based on transition metal complexes as hole conductors.

Comprehensive control of voltage loss enables 11.7% efficient solid-state dye-sensitized solar cells

The relatively large voltage loss (Vloss) in excitonic type solar cells severely limits their power conversion efficiencies (PCEs). Here, we report a comprehensive control of Vloss through efficacious engineering of the sensitizer and redox mediator, making a breakthrough in the PCE of dye-sensitized solar cells (DSSCs). The targeted down-regulation of Vloss is successfully realized by three valid channels: (i) reducing the driving force of electron injection through dye molecular engineering, (ii) decreasing the dye regeneration overpotential through redox mediator engineering, and (iii) suppressing interfacial electron recombination. Significantly, the “trade-off” effect between the dye optical band gap and the open-circuit voltage (VOC) is minimized to a great extent, achieving a distinct enhancement in photovoltaic performance (PCE > 11.5% with VOC up to 1.1 V) for liquid junction cells. The solidification of the best-performing device leads to a PCE of 11.7%, which is so far the highest efficiency obtained for solid-state DSSCs. Our work inspires further development in highly efficient excitonic solar cells by comprehensive control of Vloss.