Yinyin Xu

In situ synthesis of MIL-100(Fe) in the capillary column for capillary electrochromatographic separation of small organic molecules.

Because of the unusual properties of the structure, the metal organic frameworks (MOFs) have received great interest in separation science. However, the most existing methods for the applications of MOFs in separation science require an off-line procedure to prepare the materials. Here, we report an in situ, layer-by-layer self-assembly approach to fabricate MIL-100(Fe) coated open tubular (OT) capillary columns for capillary electrochromatography. By a controllable manner, the OT capillary columns with a tailored MIL-100(Fe) coating have been successfully synthesized. The results of SEM, XRD, FT-IR, and ICP-AES indicated that MIL-100(Fe) was successfully grafted on the inner wall of the capillary. Some neutral, acidic and basic analytes were used to evaluate the performance of the MIL-100(Fe) coating OT capillary column. Because of the size selectivity of lattice aperture and hydrophobicity of the organic ligands, three types of analytes were well separated with this novel MIL-100(Fe) coating OT capillary column. For three consecutive runs, the intraday relative standard deviations (RSDs) of migration time and peak areas were 0.4-4.6% and 1.2-6.6%, respectively. The interday RSDs of migration time and peak areas were 0.6-8.0% and 2.2-9.5%, respectively. The column-to-column reproducibility of retention time was in range of 0.6-9.2%. Additionally, the 10 cycles OT capillary column (10-LC) could be used for more than 150 runs with no observable changes on the separation efficiency.

Separation of small organic molecules using covalent organic frameworks-LZU1 as stationary phase by open-tubular capillary electrochromatography.

Covalent organic frameworks (COFs) have attracted much attention because of their permanent nanoscale porosity and higher surface area compared to zeolites as well as robustness. COFs have great potential in several fields such as hydrogen storage, gas separation, and catalysis. However, COFs have not yet been applied in capillary electrochromatography. Herein, covalent organic frameworks-LZU1 (COF-LZU1) was used as the stationary phase in open-tubular capillary electrochromatography for the first time. Compared to the monoliths used in electrochromatography, the preparation technique of a COF-LZU1-coated capillary was simple and practical. The baseline separation of model analytes including alkylbenzenes, polyaromatic hydrocarbons, and anilines by the COF-LZU1-coated capillary was achieved based on the size selectivity of COF-LZU1 porous structure and hydrophobic interactions between the model analytes and organic ligands of COF-LZU1. The load capacity of the COF-LZU1-coated capillary for naphthalene was 0.6mg/mL. For three consecutive runs, the intraday relative standard deviations (RSDs) were 1.4-2.6% for the migration time and 2.7-8.7% for the peak area. The interday RSDs were 1.3-3.9% for the migration time and 3.7-9.7% for the peak area. The column-to-column reproducibility of migration time was in the range 1.0-3.9%. Moreover, the coated capillary was used for >300 runs with no changes in the separation efficiency. Thus, COFs have great potential in capillary electrochromatography and may provide a new method for chromatographic separation.

Preparation and characterization of open-tubular capillary column modified with graphene oxide nanosheets for the separation of small organic molecules

A novel coated capillary was prepared by immobilizing graphene oxide (GO) on the fused-silica capillary (75 μm i.d.) which was derivatized by 3-aminopropyl-trimethoxysilane (APTMS). The bare capillary, APTMS modified capillary (NH2-capillary) and GO coated capillary (GO-capillary) were characterized by streaming potentials (SPs), fluorescence microscope and scanning electron microscope (SEM). The results indicated that the capillary was successfully modified with GO sheets via covalent bonding and electrostatic effect. Compared with bare capillary, greater separation efficiency was achieved by GO-capillary column as a result of the increasing interactions between the small organic molecules and the inner wall of the GO-capillary column originated from the π-π electrostatic stacking. For three consecutive runs, the intra-day relative standard deviations (RSDs) of migration time and peak areas were 0.6-4.3% and 2.8-9.3%, respectively. The inter-day relative standard deviations of migration time and peak areas were 0.2-8.3% and 4.5-9.6%. Additionally, one GO-capillary column could be used for more than 100 runs with no observable changes on the separation efficiency.

A sensitive colorimetric method for the determination of nitrite in water supplies, meat and dairy products using ionic liquid-modified methyl red as a colour reagent

This paper describes a colorimetric approach to determine trace amounts of nitrite in water supplies, meat and dairy products using 1-butyl-3-methylimidazolium-modified methyl red ([BMIM]MR) as a colour reagent. The technique capitalises on the catalytic effect of nitrite on the oxidative degradation of [BMIM]MR by potassium bromate in acidic media. The absorbances were proportional to nitrite concentrations in the range of 8.70×10(-2) to 4.17 μM with a detection limit of 1.64×10(-2) μM. Compared with the method using methyl red as a colour reagent, 60 times improvement of sensitivity was obtained. Activation energy and the apparent rate constant for the catalytic reaction are 61.11 kJ mol(-1) and 1.18×10(4) s(-1), respectively. The proposed method was successfully applied for the analysis of nitrite in Yellow River water, chicken, and milk with recoveries ranging from 96% to 105%.

Probing the mechanism of the interaction between l-cysteine-capped-CdTe quantum dots and Hg2+ using capillary electrophoresis with ensemble techniques

A good understanding of the mechanism of interaction between quantum dots (QDs) and heavy metal ions is essential for the design of more effective sensor systems. In this work, CE was introduced to explore how l‐cysteine‐capped‐CdTe QDs (l‐cys‐CdTe QDs) interacts with Hg2+. The change in electrophoretic mobility can synchronously reflect the change in the composition and property of QDs. The effects of the free and capping ligands on the system are discussed in detail. ESI‐MS, dynamic light scattering (DLS), zeta potential, and fluorescence (FL) were also applied as cooperative tools to study the interaction mechanism. Furthermore, the interaction mechanism, which principally depended on the concentration of Hg2+, was proposed reasonably. At the low concentration of Hg2+, the formation of a static complex between Hg2+ and the carboxyl and amino groups of l‐cys‐CdTe QDs surface was responsible for the FL quenching. With the increase of Hg2+ concentration, the capping l‐cys was stripped from the surface of l‐cys‐CdTe QDs due to the high affinity of Hg2+ to the thiol group of l‐cys. Our study demonstrates that CE can reveal the mechanism of the interaction between QDs and heavy metal ions, such as FL quenching.

Preparation and characterization of magnetic gold shells using different sizes of gold nanoseeds and their corresponding effects on catalysis

The effect of gold nanoseeds with different sizes on the gold shell was investigated. Gold nanoparticles of two different sizes (∼3 nm and ∼15 nm) were prepared and attached to the surface of amine functionalized silica coated iron oxide nanoparticles. The gold nanoparticles assembled on the surface were used as seeds for further gold shell formation. It was observed that the amount of Au attached to iron oxide nanoparticles is higher for bigger gold nanoseeds as compared to smaller gold nanoseeds. Similarly, after the formation of gold shell, a higher amount of Au was found for larger gold nanoparticles. However, both transmission electron microscopy (TEM) and scanning electron microscopy (SEM) results show that a complete, uniform, and compact gold shell was formed in the case of using small gold nanoseeds, but for larger gold nanoseeds the shell formed was discontinuous and was not uniform, while most of the gold nanoparticles were found to be aggregated on the surface. The nanocomposites showed high efficiency in catalysis for the reduction of 4-nirophenol, among which Nanocomp-2, with a thin stable gold shell showed excellent catalytic activity and reusability. All of the nanocomposites have high magnetization values and can be easily separated from the reaction mixture using a magnet and can be reused.

On-line capillary electrophoresis enrichment by combining chitosan trapping with surfactant assisted sample stacking for the ultratrace determination of organic acids in Plateau alfalfa roots

In this paper, four organic acids constituents of Plateau alfalfa roots have been identified and detected by a novel capillary electrophoresis (CE) strategy which combined chitosan (CS) trapping and cetyltrimethyl ammonium bromide (CTAB) assisted sample stacking. Under the optimized condition, organic acids, i.e., aconitic acid, gallic acid, citric acid and l-malic acid were concentrated and separated within 3 min. Validation parameters of this method (such as detection limits, linearity and precision) were also investigated and the limit of detection (LOD) was 2.41-53.9 ng mL(-1). Linearity was obtained over the magnitude range of 5-4000 ng mL(-1) approximately for different organic acids and 3×10(2)-1.5×10(4) folds enrichment was achieved. The method has been applied to the determination of organic acids in roots of normal grown Plateau alfalfa and stressing affected Plateau alfalfa. Satisfactory results and recoveries were obtained in the analysis without costly and complicated sample pretreatment.

In situ preparation of multilayer coated capillary column with HKUST-1 for separation of neutral small organic molecules by open tubular capillary electrochromatography

The popularity of novel nanoparticles coated capillary column has aroused widespread attention of researchers. Metal organic frameworks (MOFs) with special structure and chemical properties have received great interest in separation sciences. This work presents the investigation of HKUST-1 (Hong Kong University of Science and Technology-1, called Cu3(BTC)2 or MOF-199) nanoparticles as a new type of coating material for capillary electrochromatography. For the first time, three layers coating (3-LC), five layers coating (5-LC), ten layers coating (10-LC), fifteen layers coating (15-LC), twenty layers coating(20-LC) and twenty-five layers coating (25-LC) capillary columns coated with HKUST-1 nanoparticles were synthesized by covalent bond with in situ, layer-by-layer self-assembly approach. The results of scanning electron microscopy (SEM), X-ray diffraction (XRD) and plasma atomic emission spectrometry (ICP-AES) indicated that HKUST-1 was successfully grafted on the inner wall of the capillary. The separating performances of 3-LC, 5-LC, 10-LC, 15-LC, 20-LC and 25-LC open tubular (OT) capillary columns were studied with some neutral small organic molecules. The results indicated that the neutral small organic molecules were separated successfully with 10-LC, 15-LC and 20-LC OT capillary columns because of the size selectivity of lattice aperture and hydrophobicity of organic ligands. In addition, 10-LC and 15-LC OT capillary columns showed better performance for the separation of certain phenolic compounds. Furthermore, 10-LC, 15-LC and 20-LC OT capillary columns exhibited good intra-day repeatability with the relative standard deviations (RSDs; %) of migration time and peak areas lying in the range of 0.3-1.2% and 0.5-4.2%, respectively. For inter-day reproducibility, the RSDs of the three OT capillary columns were found to be lying in the range of 0.3-5.5% and 0.3-4.5% for migration time and peak area, respectively. The RSDs of retention times for column-to-column for three batches of 10-LC, 15-LC and 20-LC OT capillary columns were in the range from 2.3% to 7.2%. Moreover, the fabricated 10-LC, 15-LC and 20-LC OT capillary columns exhibited good repeatability and stability for separation, which could be used successively for more than 120 runs with no observable changes on the separation efficiency.