Yisun Cheng

Mechanism of Propene Poisoning on Fe-ZSM-5 for Selective Catalytic Reduction of NOx with Ammonia

Application of Fe-zeolites for urea-SCR of NO(x) in diesel engine is limited by catalyst deactivation with hydrocarbons. In this work, we investigated the effect of propene on the activity of Fe-ZSM-5 for selective catalytic reduction of NO(x) with ammonia (NH(3)-SCR), and proposed a deactivation mechanism of Fe(3+) active site blockage by propene residue. The NO conversion decreased in the presence of propene at various temperatures, while the effect was not significant when NO was replaced by NO(2) in the feed, especially at low temperatures (<300 degrees C). The surface area and pore volume were decreased due to carbonaceous deposition. The site blockage was mainly on Fe(3+) sites on which NO was to be oxidized to NO(2). The activity for NO oxidation to NO(2) was significantly inhibited on a propene poisoned catalyst below 400 degrees C. The adsorption of NH(3) on the Bronsted acid sites to form NH(4)(+) was not hindered even on the propene poisoned catalyst, and the amount of absorbed NH(3) was still abundant and enough to react with NO(2) to generate N(2). The hydrocarbon oxygenates such as formate, acetate, and containing nitrogen organic compounds were observed on catalyst surface, however, no graphitic carbonaceous deposit was formed.

Propene Poisoning on Three Typical Fe-zeolites for SCR of NOx with NH3: From Mechanism Study to Coating Modified Architecture

Application of Fe-zeolites for urea-SCR of NO(x) in diesel engine is limited by catalyst deactivation with hydrocarbons (HCs). In this work, a series of Fe-zeolite catalysts (Fe-MOR, Fe-ZSM-5, and Fe-BEA) was prepared by ion exchange method, and their catalytic activity with or without propene for selective catalytic reduction of NO(x) with ammonia (NH(3)-SCR) was investigated. Results showed that these Fe-zeolites were relatively active without propene in the test temperature range (150-550 °C); however, all of the catalytic activity was suppressed in the presence of propene. Fe-MOR kept relatively higher activity with almost 80% NO(x) conversion even after propene coking at 350 °C, and 38% for Fe-BEA and 24% for Fe-ZSM-5 at 350 °C, respectively. It was found that the pore structures of Fe-zeolite catalysts were one of the main factors for coke formation. As compared to ZSM-5 and HBEA, MOR zeolite has a one-dimensional structure for propene diffusion, relatively lower acidity, and is not susceptible to deactivation. Nitrogenated organic compounds (e.g., isocyanate) were observed on the Fe-zeolite catalyst surface. The site blockage was mainly on Fe(3+) sites, on which NO was activated and oxidized. Furthermore, a novel fully formulated Fe-BEA monolith catalyst coating modified with MOR was designed and tested, the deactivation due to propene poisoning was clearly reduced, and the NO(x) conversion reached 90% after 700 ppm C(3)H(6) exposure at 500 °C.