Yohann Nicolas

Nanostructured SnO2–ZnO Heterojunction Photocatalysts Showing Enhanced Photocatalytic Activity for the Degradation of Organic Dyes

Nanoporous SnO(2)-ZnO heterojunction nanocatalyst was prepared by a straightforward two-step procedure involving, first, the synthesis of nanosized SnO(2) particles by homogeneous precipitation combined with a hydrothermal treatment and, second, the reaction of the as-prepared SnO(2) particles with zinc acetate followed by calcination at 500 °C. The resulting nanocatalysts were characterized by X-ray diffraction (XRD), FTIR, Raman, X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analyses, transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectroscopy. The SnO(2)-ZnO photocatalyst was made of a mesoporous network of aggregated wurtzite ZnO and cassiterite SnO(2) nanocrystallites, the size of which was estimated to be 27 and 4.5 nm, respectively, after calcination. According to UV-visible diffuse reflectance spectroscopy, the evident energy band gap value of the SnO(2)-ZnO photocatalyst was estimated to be 3.23 eV to be compared with those of pure SnO(2), that is, 3.7 eV, and ZnO, that is, 3.2 eV, analogues. The energy band diagram of the SnO(2)-ZnO heterostructure was directly determined by combining XPS and the energy band gap values. The valence band and conduction band offsets were calculated to be 0.70 ± 0.05 eV and 0.20 ± 0.05 eV, respectively, which revealed a type-II band alignment. Moreover, the heterostructure SnO(2)-ZnO photocatalyst showed much higher photocatalytic activities for the degradation of methylene blue than those of individual SnO(2) and ZnO nanomaterials. This behavior was rationalized in terms of better charge separation and the suppression of charge recombination in the SnO(2)-ZnO photocatalyst because of the energy difference between the conduction band edges of SnO(2) and ZnO as evidenced by the band alignment determination. Finally, this mesoporous SnO(2)-ZnO heterojunction nanocatalyst was stable and could be easily recycled several times opening new avenues for potential industrial applications.

Low-Temperature UV Processing of Nanoporous SnO2 Layers for Dye-Sensitized Solar Cells

Connection of SnO₂ particles by simple UV irradiation in air yielded cassiterite SnO₂ porous films at low temperature. XPS, FTIR, and TGA-MS data revealed that the UV treatment has actually removed most of the organics present in the precursor SnO₂ colloid and gave more hydroxylated materials than calcination at high temperature. As electrodes for dye-sensitized solar cells (DSCs), the N3-modified 1-5 μm thick SnO₂ films showed excellent photovoltaic responses with overall power conversion efficiency reaching 2.27% under AM1.5G illumination (100 mW cm⁻²). These performances outperformed those of similar layers calcined at 450 °C mostly due to higher V(oc) and FF. These findings were rationalized in terms of slower recombination rates for the UV-processed films on the basis of dark current analysis, photovoltage decay, and electrical impedance spectroscopy studies.

A TIPS-TPDO-tetraCN-Based n-Type Organic Field-Effect Transistor with a Cross-linked PMMA Polymer Gate Dielectric

Recent improvement in the performance of the n-type organic semiconductors as well as thin gate dielectrics based on cross-linked polymers offers new opportunities to develop high-performance low-voltage n-type OFETs suitable for organic complementary circuits. Using TIPS-tetracyanotriphenodioxazine (TIPS-TPDO-tetraCN) and cross-linked poly(methyl methacrylate) (c-PMMA), respectively as n-type organic semiconductor and gate dielectric, linear regime field-effect mobility (1.8 ± 0.2) × 10(-2) cm(2) V(-1)s(-1), small spatial standard deviation of threshold voltage (∼0.1 V), and operating voltage less than 3 V are attainable with the same device structure and contact materials used commonly for p-type OFETs. Through comparative static and dynamic characterizations of c-PMMA and PMMA gate dielectrics, it is shown that both smaller thickness and larger relative permittivity of c-PMMA contributes to reduced operating voltage. Furthermore, negligible hysteresis brings evidence to small trap states in the semiconductor near gate dielectric of the n-type OFETs with c-PMMA. The use of TIPS-TPDO-tetraCN and c-PMMA is fully compatible with polyethylene terephthalate substrate, giving promise to various flexible applications.

Cumulative effects of electrode and dielectric surface modifications on pentacene-based transistors

Surface modifications of the dielectric and the metal of pentacene-based field effect transistors using self-assembled monolayer (SAM) were studied. First, a low interfacial trap density and pentacene 2D-growth were favored by the nonpolar and low surface energy of octadecyltrichlorosilane-based SAM. This treatment leaded to increased mobility up to 0.4 cm2 V−1 s−1 and no observable hysteresis on transfer curves. Second, reduced hole injection barrier and contact resistance were achieved by fluorinated thiols deposited on gold contacts resulting in an increased mobility up to 0.6 cm2 V−1 s−1. Finally, a high mobility of 2.6 cm2 V−1 s−1 was achieved by cumulative effects of both treatments.

Finely Tuned SnO2 Nanoparticles for Efficient Detection of Reducing and Oxidizing Gases: The Influence of Alkali Metal Cation on Gas-Sensing Properties

Tin dioxide (SnO2) nanoparticles were straightforwardly synthesized using an easily scaled-up liquid route that involves the hydrothermal treatment, either under acidic or basic conditions, of a commercial tin dioxide particle suspension including potassium counterions. After further thermal post-treatment, the nanomaterials have been thoroughly characterized by Fourier transform infrared and Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and nitrogen sorption porosimetry. Varying pH conditions and temperature of the thermal treatment provided cassiterite SnO2 nanoparticles with crystallite sizes ranging from 7.3 to 9.7 nm and Brunauer-Emmett-Teller surface areas ranging from 61 to 106 m2·g-1, acidic conditions favoring potassium cation removal. Upon exposure to a reducing gas (H2, CO, and volatile organic compounds such as ethanol and acetone) or oxidizing gas (NO2), layers of these SnO2 nanoparticles led to highly sensitive, reversible, and reproducible responses. The sensing results were discussed in regard to the crystallite size, specific area, valence band energy, Debye length, and chemical composition. Results highlight the impact of the counterion residuals, which affect the gas-sensing performance to an extent much higher than that of size and surface area effects. Tin dioxide nanoparticles prepared under acidic conditions and calcined in air showed the best sensing performances because of lower amount of potassium cations and higher crystallinity, despite the lower surface area.