Yohei Miwa

Glass Transition Temperature and β Relaxation Temperature around Chain End of Polystyrene Determined by Site Specific Spin Labeling

A glass transition temperature, T(g), and a β relaxation temperature, T(β), of spin-labeled polystyrene (PS) having a number average molecular weight (M(n)) of ca. 25 kDa were determined by the microwave power saturation (MPS) method of electron spin resonance (ESR). Spin labeling was selectively carried out at chain ends or midchain segments. This method allowed us to determine the local T(g) and the local T(β) around the spin-labeled sites, selectively. The T(g) determined by the ESR, T(g,ESR), was in good agreement with that determined by differential scanning calorimetry, T(g,DSC); the T(g,ESR) decreased with decreasing M(n) with blending oligomers as well as the T(g,DSC). The T(g,ESR) for the end-labeled PS (PS-E) was equal to that for the midchain-labeled PS (PS-M) irrespective of the M(n). However, we previously reported that the PS-E showed distinctly higher segmental mobility than the PS-M in the temperature range 423-463 K (above T(g)). Therefore, we conclude that the chain ends intrinsically have higher segmental mobility than midchain segments due to the discontinuity of repeat units; however, the mobilities of chain ends and midchain segments are averaged out in the vicinity of T(g) due to the cooperativities with neighboring numerous chain segments. Concerning the β relaxation, the T(β) determined by the MPS was in good agreement with those determined by dielectric and dynamic mechanical spectroscopies and dilatometry. The T(β) of the PS-E was the same with that of the PS-M within experimental uncertainties; the T(β) was insensitive to the M(n) in contrast to the T(g). Therefore, we conclude that the effect of chain end is little on the β relaxation of PS due to its local character. In addition, the effect of annealing at 353 K was found to be the same for the T(β)s of the PS-E and PS-M.

Dual role for alkali metal cations in enhancing the low-temperature radical polymerization of N,N-dimethylacrylamide

The radical polymerization of N,N-dimethylacrylamide (DMAAm) has been investigated in the presence of several alkali metal salts, including lithium bis(trifluoromethanesulfonyl)imide (LiNTf2). The addition of an alkali metal salt led to a significant increase in the yield and molecular weight of the resulting polymer. NMR analysis of mixtures of DMAAm and LiNTf2 suggested that DMAAm was being activated by the coordination of Li+ to its CO group. Electron spin resonance analysis of the DMAAm polymerization in the presence of LiNTf2 suggested that the propagating radical was being stabilized by Li+ through a single-electron lithium bond, because a signal for the propagating radical of the acrylamide derivatives was observed for the first time in solution when LiNTf2 was added. Based on these results, we have proposed a mechanism for this polymerization, where the propagation steps occur between a lithium ion-stabilized propagating radical and a lithium ion-activated incoming monomer. Furthermore, polymers with a wide range of stereoregularities, such as isotactic, syndiotactic and heterotactic systems, were successfully prepared using this method by carefully selecting the appropriate combination of solvent and alkali metal salt.

5-N-Arylaminothiazoles as Highly Twisted Fluorescent Monocyclic Heterocycles: Synthesis and Characterization.

A series of 5-N-arylaminothiazoles was prepared by reacting thioamide dianions derived from secondary thioamides with thioformamides, followed by sequential oxidation with iodine. X-ray analyses demonstrated that they adopt structures that are highly twisted from planar conformations. Their orientations were tuned by the steric and/or electronic interactions of the substituents at their 2-, 4-, and 5-positions. The 5-aminothiazoles exhibited a range of fluorescent emissions, from blue to orange. Although the absorption spectra were independent of the polarity of the solvent, fluorescent emissions were influenced by the polarity of the solvent: in more polar solvents, the emissions were red-shifted. These phenomena were examined in terms of Lippert-Mataga plots and the change in the dipole moment between the ground and excited states. They also exhibited emissions in the solid state, again from blue to orange. Cyclic voltammetry of the 5-aminothiazoles showed reversible waves of one-electron oxidation. The half-potential of the oxidation was reduced by the introduction of electron-donating groups to the phenyl groups on the nitrogen atom at the 5-position. DFT calculations were carried out to determine the energy levels of the HOMO and LUMO. Finally, the results of TG-DTA showed that they are thermally stable.

Syndiotactic- and heterotactic-specific radical polymerization of N-n-propylmethacrylamide complexed with alkali metal ions

We investigated the radical polymerization of N-n-propylmethacrylamide (NNPMAAm) in the presence of alkali metal bis(trifluoromethanesulfonyl)imides (MNTf2), in particular LiNTf2. The addition of MNTf2 led to a significant improvement in the yield and molecular weight of the resulting poly(NNPMAAm)s. Furthermore, the solvent employed influenced stereospecificity in the presence of LiNTf2. The stoichiometry of the NNPMAAm–Li+ complex appeared to be critical for determining the stereospecificity in the NNPMAAm polymerization. The 1 : 1-complexed monomer in protic polar solvents provided syndiotactic-rich polymers, whereas the 2 : 1-complexed monomer in aprotic solvents gave heterotactic-rich polymers. Stereochemical analyses revealed that m-addition by an r-ended radical was the key step in the induction of heterotactic specificity in the aprotic solvents. Spectroscopic analyses suggested that the Li+ cation played a dual role in the polymerization process, with Li+ stabilizing the propagating radical species and also activating the incoming monomer. Kinetic studies with the aid of electron spin resonance spectroscopy revealed that the addition of LiNTf2 caused a significant increase in the kp value and a decrease in the kt value. The stereoregularity of poly(NNPMAAm)s was found to influence the phase transition behavior of their aqueous solutions. In a series of syndiotactic-rich polymers, the phase-transition temperature decreased gradually with increase in the rr triad content. Furthermore, heterotactic-rich poly(NNPMAAm) exhibited high hysteresis, which increased in magnitude with increasing mr triad content.

Pyridinium 5-aminothiazoles: specific photophysical properties and vapochromism in halogenated solvents

Treatment of pyridyl-5-aminothiazoles (1–4) with alkyl triflates or benzyl iodide afforded the corresponding pyridinium 5-aminothiazoles (5–10), which exhibited bathochromically shifted absorption and fluorescence spectra relative to those of 1–4. Moreover, the vapochromic properties of 5 specific to halogenated solvents were examined by powder X-ray diffraction analysis. Pmma films containing 5 can thus be used to detect halogenated solvents, especially CH2Cl2.

Dynamic ionic crosslinks enable high strength and ultrastretchability in a single elastomer

Maintenance-free self-healing elastomers that switch their mechanical properties on demand would be extremely useful materials for improving the functionalities, safety, energy efficiency, and lifetimes of many kinds of products and devices. However, strength and stretchability are conflicting properties for elastomers because the inherent crosslinking density of a polymeric network is unchangeable. For example, heavily crosslinked elastomers are strong, but poorly stretchable. Here we report an ionically crosslinked polyisoprene elastomer in which the ionic moieties are continually hopping between ionic aggregates at room temperature. Thus, the network is dynamic. This elastomer spontaneously self-heals without the input of external energy or healing agents. Furthermore, it behaves like a strong elastic material under rapid deformation, but acts like a highly stretchable and viscoelastic material under slow deformation. Our ionic elastomer shows a variety of notable mechanical properties, including high fracture strength (≈7 MPa), good toughness (≈70 MJ m−3), and ultrastretchability (>13,400%).Imparting both high strength and stretchability in polymers is challenging as it requires changing the crosslinking density of the polymer network. Here, Miwa et al. use an ionic elastomer with dynamic crosslinks to achieve high strength under rapid deformation but high stretchability under slow deformation in a single material.

Discotic liquid crystals of transition metal complexes 51: Synthesis and mesomorphism of flat-pumpkin-shaped phthalocyanine-fullerene dyads

We have synthesized a novel type of donor–acceptor liquid crystalline material, phthalocyanine-fullerene (Pc-C60) dyad, [m,p,m′-(C14O)3PhO]6PcCu-C60 (7), and the Pc precursors, [m,p,m′-(C14O)3PhO]6...

Effects of the lateral substituent on the cubic phase formation of two analogous compounds, 4ʹ-n-hexadecyloxy-3ʹ-cyanobiphenyl-4-carboxylic acid (ACBC-16) and its 3ʹ-nitro compound (ANBC-16)

Two cubic (Cub) phase forming compounds, 4ʹ-n-hexadecyloxy-3ʹ-cyanobiphenyl-4-carboxylic acid (ACBC-16) and its 3′-nitro analogue (ANBC-16) were studied by infrared (IR) spectroscopy. In the temperature region of the Cub phase, the molar fraction of hydrogen-bonded COOH groups estimated for ACBC-16 was by ≈0.05 at maximum larger than that for ANBC-16 and the aromatic ring C═C stretching (ν(C═C)ring) band frequency of ACBC-16 was by 3 cm−1 lower than that of ANBC-16. The quantum chemical calculation at DFT/B3LYP level, on the one hand, showed no meaningful difference in the stabilisation energy for dimerisation and the ν(C═C)ring band frequency between the respective model compounds. These results can be ascribed to the different steric effects of the side groups; the CN group would make possible the close contact of neighbouring phenyl rings while the bulky NO2 group would not, giving slightly more stabilised dimerisation of ACBC-16 in the Cub phase than in ANBC-16.

Thermally induced cationic polymerization of isobutyl vinyl ether in toluene in the presence of solvate ionic liquid

Radical polymerization of isobutyl vinyl ether (IBVE) was attempted with the aid of the interaction between the corresponding propagating radical and lithium cation (Li+). LiN(SO2CF3)2 (LiNTf2) and ester compounds, such as methyl methacrylate (MMA) and vinyl acetate (VAc), were added as a Li+ source and dissolving agent for LiNTf2, respectively. Homopolymers of cationically polymerizable IBVE were obtained despite the presence of radically polymerizable monomers such as MMA and VAc. Contrary to our expectation, the polymerization proceeded via not a radical mechanism but a cationic mechanism. However, this cationic polymerization was found to be unusual. In particular, the polymer yield increased with the polymerization temperature; successful polymerization was observed at 100 °C, whereas no polymerization occurred at lower temperatures such as at 0 °C. The behavior of the present system was therefore defined as “thermally induced cationic polymerization”. The mechanism of thermally induced cationic polymerization is still not clear, but it is assumed that the propagating cation is markedly stabilized through its interaction with the solvate ionic liquid formed between LiNTf2 and the Lewis base.

Experimental and Theoretical Examination of the Radical Cations Obtained from the Chemical and Electrochemical Oxidation of 5-Aminothiazoles

Abstract Chemical or electrochemical one‐electron oxidation of 5‐N‐arylaminothiazoles was found to afford stable radical cations. For chemical oxidation, 1 equivalent of [(4‐BrC6H4)3N][SbCl6] (Magic Blue, MB) was added to CH2Cl2 solutions of the thiazoles, and the thus‐obtained radicals showed light absorption in the near‐infrared region. Electrochemical oxidation also led to bathochromic shifts in the absorption bands, and the obtained spectra were similar to those derived from the chemically oxidized species. These radicals afforded electron paramagnetic resonance (EPR) spectra that are consistent with the notion of stable nitrogen radicals (half‐life≤385 h). The EPR spectrum of a thiazole containing 4‐dimethylaminophenyl groups on the nitrogen atom at the 5‐position changed significantly upon adding >3 equivalents of MB. Details of the electronic structures of the experimentally obtained radical cations were generated from theoretical calculations.