Yong Sik Ok

Biochar as a sorbent for contaminant management in soil and water: A review

Biochar is a stable carbon-rich by-product synthesized through pyrolysis/carbonization of plant- and animal-based biomass. An increasing interest in the beneficial application of biochar has opened up multidisciplinary areas for science and engineering. The potential biochar applications include carbon sequestration, soil fertility improvement, pollution remediation, and agricultural by-product/waste recycling. The key parameters controlling its properties include pyrolysis temperature, residence time, heat transfer rate, and feedstock type. The efficacy of biochar in contaminant management depends on its surface area, pore size distribution and ion-exchange capacity. Physical architecture and molecular composition of biochar could be critical for practical application to soil and water. Relatively high pyrolysis temperatures generally produce biochars that are effective in the sorption of organic contaminants by increasing surface area, microporosity, and hydrophobicity; whereas the biochars obtained at low temperatures are more suitable for removing inorganic/polar organic contaminants by oxygen-containing functional groups, electrostatic attraction, and precipitation. However, due to complexity of soil-water system in nature, the effectiveness of biochars on remediation of various organic/inorganic contaminants is still uncertain. In this review, a succinct overview of current biochar use as a sorbent for contaminant management in soil and water is summarized and discussed.

Organic and inorganic contaminants removal from water with biochar, a renewable, low cost and sustainable adsorbent--a critical review.

Biochar is used for soil conditioning, remediation, carbon sequestration and water remediation. Biochar application to water and wastewater has never been reviewed previously. This review focuses on recent applications of biochars, produced from biomass pyrolysis (slow and fast), in water and wastewater treatment. Slow and fast pyrolysis biochar production is briefly discussed. The literature on sorption of organic and inorganic contaminants by biochars is surveyed and reviewed. Adsorption capacities for organic and inorganic contaminants by different biochars under different operating conditions are summarized and, where possible, compared. Mechanisms responsible for contaminant remediation are briefly discussed. Finally, a few recommendations for further research have been made in the area of biochar development for application to water filtration.

Effects of pyrolysis temperature on soybean stover- and peanut shell-derived biochar properties and TCE adsorption in water

Conversion of crop residues into biochars (BCs) via pyrolysis is beneficial to environment compared to their direct combustion in agricultural field. Biochars developed from soybean stover at 300 and 700 °C (S-BC300 and S-BC700, respectively) and peanut shells at 300 and 700 °C (P-BC300 and P-BC700, respectively) were used for the removal of trichloroethylene (TCE) from water. Batch adsorption experiments showed that the TCE adsorption was strongly dependent on the BCs properties. Linear relationships were obtained between sorption parameters (K(M) and S(M)) and molar elemental ratios as well as surface area of the BCs. The high adsorption capacity of BCs produced at 700 °C was attributed to their high aromaticity and low polarity. The efficacy of S-BC700 and P-BC700 for removing TCE from water was comparable to that of activated carbon (AC). Pyrolysis temperature influencing the BC properties was a critical factor to assess the removal efficiency of TCE from water.

Engineered/designer biochar for contaminant removal/immobilization from soil and water: Potential and implication of biochar modification

The use of biochar has been suggested as a means of remediating contaminated soil and water. The practical applications of conventional biochar for contaminant immobilization and removal however need further improvements. Hence, recent attention has focused on modification of biochar with novel structures and surface properties in order to improve its remediation efficacy and environmental benefits. Engineered/designer biochars are commonly used terms to indicate application-oriented, outcome-based biochar modification or synthesis. In recent years, biochar modifications involving various methods such as, acid treatment, base treatment, amination, surfactant modification, impregnation of mineral sorbents, steam activation and magnetic modification have been widely studied. This review summarizes and evaluates biochar modification methods, corresponding mechanisms, and their benefits for contaminant management in soil and water. Applicability and performance of modification methods depend on the type of contaminants (i.e., inorganic/organic, anionic/cationic, hydrophilic/hydrophobic, polar/non-polar), environmental conditions, remediation goals, and land use purpose. In general, modification to produce engineered/designer biochar is likely to enhance the sorption capacity of biochar and its potential applications for environmental remediation.

A review of biochar as a low-cost adsorbent for aqueous heavy metal removal

ABSTRACT As a low-cost adsorbent, biochar can be used as a low-cost adsorbent for wastewater treatment, particularly with respect to treating heavy metals in wastewater. A number of studies have demonstrated effective removal of heavy metals from aqueous solutions by biochar and, in some cases, proven the superiority of biochars to activated carbons. Among several factors affecting the sorption ability of biochars, feedstock materials play a significant role. This review incorporates existing literature to understand the overall sorption behavior of heavy metals on biochar adsorbents. Depending on the biochar type, heavy metal can be removed by different mechanisms such as complexation, physical sorption, precipitation and electrostatic interactions. Mathematical sorption models can be used to understand the efficiency of biochar at removing heavy metals, and promote the application of biochar technology in water treatment.

Trichloroethylene adsorption by pine needle biochars produced at various pyrolysis temperatures.

In this study, pine needles were converted to biochar (BC) at different pyrolysis temperatures of 300, 500, and 700 °C to sorb trichloroethylene (TCE), and the changes in BC properties with each temperature were evaluated. Pyrolysis temperature showed a pronounced effect on BC properties. Decreases in molar H/C and O/C ratios resulted from removing O- and H-containing functional groups with increasing temperature, and produced high aromaticity and low polarity BCs. BCs produced at higher temperature showed greater TCE removal efficiency from water due to their high surface area, micro-porosity, and carbonized extent. The performance of various BCs for TCE removal was assessed by the Freundlich, Langmuir, Temkin, and Dubinin-Radushkevich adsorption models, among which the Temkin and Dubinin-Radushkevich models best described TCE adsorption onto various BCs, indicating prevailing sorption mechanism as pore-filling.

Effects of soil dilution and amendments (mussel shell, cow bone, and biochar) on Pb availability and phytotoxicity in military shooting range soil.

Bioavailability and bioaccessibility determine the level of metal toxicity in the soils. Inorganic soil amendments may decrease metal bioavailability and enhance soil quality. This study used mussel shell, cow bone, and biochar to reduce lead (Pb) toxicity in the highly contaminated military shooting range soil in Korea. Water-soluble and 1-M ammonium nitrate extractions, and a modified physiologically based extraction test (PBET) were performed to determine Pb bioavailability and bioaccessibility in the soil, respectively. Active C in the soil was also measured to evaluate the effects of the amendments on biological soil quality. The Pb contaminated soil was diluted in serial with uncontaminated soil for the bioassays. Seed germination and root elongation tests using lettuce (Lactuca sativa) showed increases in germination percentage and root length in soil treated with the amendments. Biochar was most effective and increased seed germination by 360% and root length by 189% compared to the unamended soil. Up to 20% soil dilution resulted in more than 50% seed germination. Bioavailability and bioaccessibility of Pb in the soils were decreased by 92.5% and 48.5% with mussel shell, by 84.8% and 34.5% with cow bone, and by 75.8% and 12.5% with biochar, respectively, compared to the unamended soil. We found that the Pb availability in the military shooting range soil can be reduced effectively by the tested amendments or soil dilution alternately, thereby decreasing the risk of ecotoxicity. Furthermore, the increasing active C from the amendments revitalized the soil contaminated with Pb.

Effects of rapeseed residue on lead and cadmium availability and uptake by rice plants in heavy metal contaminated paddy soil.

Rapeseed (Brassica napus L.) has been cultivated for biodiesel production worldwide. Winter rapeseed is commonly grown in the southern part of Korea under a rice-rapeseed double cropping system. In this study, a greenhouse pot experiment was conducted to assess the effects of rapeseed residue applied as a green manure alone or in combinations with mineral N fertilizer on Cd and Pb speciation in the contaminated paddy soil and their availability to rice plant (Oryza sativa L.). The changes in soil chemical and biological properties in response to the addition of rapeseed residue were also evaluated. Specifically, the following four treatments were evaluated: 100% mineral N fertilizer (N100) as a control, 70% mineral N fertilizer+rapeseed residue (N70+R), 30% mineral N fertilizer+rapeseed residue (N30+R) and rapeseed residue alone (R). The electrical conductivity and exchangeable cations of the rice paddy soil subjected to the R treatment or in combinations with mineral N fertilizer treatment, N70+R and N30+R, were higher than those in soils subjected to the N100 treatment. However, the soil pH value with the R treatment (pH 6.3) was lower than that with N100 treatment (pH 6.9). Use of rapeseed residue as a green manure led to an increase in soil organic matter (SOM) and enhanced the microbial populations in the soil. Sequential extraction also revealed that the addition of rapeseed residue decreased the easily accessible fraction of Cd by 5-14% and Pb by 30-39% through the transformation into less accessible fractions, thereby reducing metal availability to the rice plant. Overall, the incorporation of rapeseed residue into the metal contaminated rice paddy soils may sustain SOM, improve the soil chemical and biological properties, and decrease the heavy metal phytoavailability.

Speciation and phytoavailability of lead and antimony in a small arms range soil amended with mussel shell, cow bone and biochar: EXAFS spectroscopy and chemical extractions.

Mussel shell (MS), cow bone (CB) and biochar (BC) were selected to immobilize metals in an army firing range soil. Amendments were applied at 5% (wt) and their efficacies were determined after 175 d. For metal phytoavailability test, maize (Zea mays L.) plants were cultivated for 3weeks. Results showed that all amendments decreased the exchangeable Pb by up to 99% in planted/unplanted soils. Contrarily, exchangeable Sb were increased in the MS- and CB-amended soils. The rise in soil pH (~1 unit) by the amendments affected Pb and Sb mobility in soils. Bioavailability of Pb to maize was reduced by up to 71% in the amended soils. The Sb uptake to maize was decreased by up to 53.44% in the BC-amended soil. Sequential chemical extractions showed the transformation of easily available Pb to stable residual form with the amendment treatments. Scanning electron microscopic elemental dot mapping revealed the Pb association with Al and Si in the MS-amended soil and that with P in the CB- and BC-amended soils. Additionally, the extended X-ray absorption fine structure spectroscopic analysis indicated the transformation of organic bound Pb in unamended control soil to relatively more stable Pb-hydroxide (Ksp=10(-17.1)), chloropyromorphite (Ksp=10(-84.4)) and Pb-phosphate (Ksp=10(-23.8)) in soils amended with MS, CB and BC, respectively. Application of BC was the best in decreasing the phytoavailability of Pb and Sb in the studied army firing range soil.

Competitive adsorption of heavy metals onto sesame straw biochar in aqueous solutions

Objective of this research was to evaluate adsorption of heavy metals in mono and multimetal forms onto sesame straw biochar (SSB). Competitive sorption of metals by SSB has never been reported previously. The maximum adsorption capacities (mgg(-1)) of metals by SSB were in the order of Pb (102)≫Cd (86)≫Cr (65)>Cu (55)≫Zn (34) in the monometal adsorption isotherm and Pb (88)≫Cu (40)≫Cr (21)>Zn (7)⩾Cd (5) in the multimetal adsorption isotherm. Based on data obtained from the distribution coefficients, Freundlich and Langmuir adsorption models, and three-dimensional simulation, multimetal adsorption behaviors differed from monometal adsorption due to competition. Especially, during multimetal adsorption, Cd was easily exchanged and substituted by other metals. Further competitive adsorption studies are necessary in order to accurately estimate the heavy metal adsorption capacity of biochar in natural environments.