Yongtian Zhu

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST)

The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, also called the Guo Shou Jing Telescope) is a special reflecting Schmidt telescope. LAMOST’s special design allows both a large aperture (effective aperture of 3.6 m–4.9 m) and a wide field of view (FOV) (5 ° ). It has an innovative active reflecting Schmidt configuration which continuously changes the mirror’s surface that adjusts during the observation process and combines thin deformable mirror active optics with segmented active optics. Its primary mirror (6.67 m×6.05 m) and active Schmidt mirror (5.74 m×4.40 m) are both segmented, and composed of 37 and 24 hexagonal sub-mirrors respectively. By using a parallel controllable fiber positioning technique, the focal surface of 1.75 m in diameter can accommodate 4000 optical fibers. Also, LAMOST has 16 spectrographs with 32 CCD cameras. LAMOST will be the telescope with the highest rate of spectral acquisition. As a national large scientific project, the LAMOST project was formally proposed in 1996, and approved by the Chinese government in 1997. The construction started in 2001, was completed in 2008 and passed the official acceptance in June 2009. The LAMOST pilot survey was started in October 2011 and the spectroscopic survey will launch in September 2012. Up to now, LAMOST has released more than 480 000 spectra of objects. LAMOST will make an important contribution to the study of the large-scale structure of the Universe, structure and evolution of the Galaxy, and cross-identification of multiwaveband properties in celestial objects.

A multipurpose fiber-fed VPHG spectrograph for LAMOST

A multipurpose fiber-fed double-beam Schmidt spectrograph using VPHG (volume phase holographic gratings) is under construction for LAMOST (The Large Sky Area Multi-Object Fiber Spectroscopic Telescope). There are 16 such spectrographs (hereafter referred to as LRSs) for the project. The spectrographs are designed with wavelength coverage from 370 to 900 nm, with spectral resolutions of 1000-10000, and with multi-object capability over a 5 degrees field of view. Each spectrograph will be accommodating 250 fibers of 320 microns diameter (corresponding 3.3 arcsecs). The 200 mm diameter collimated beam is split into two separate channels. The blue channel is optimized for 370nm-590nm, and the red channel for 570nm-900nm. The LRS can work in several varied resolution modes. The optical design and performance is described. The spectrograph is of simple design with moderate image quality and good throughput. Progress on the construction of LRS is reported as well.

A Transmission-Filter Coronagraph: Design and Test

We propose a transmission-filter coronagraph for direct imaging of Jupiter-like exoplanets with ground-based telescopes. The coronagraph is based on a transmission filter that consists of finite number of transmission steps. A discrete optimization algorithm is proposed for the design of the transmission filter that is optimized for ground-based telescopes with central obstructions and spider structures. We discussed the algorithm that is applied for our coronagraph design. To demonstrate the performance of the coronagraph, a filter was manufactured and laboratory tests were conducted. The test results show that the coronagraph can achieve a high contrast of 10-6.5 at an inner working angle of 5λ/D, which indicates that our coronagraph can be immediately used for the direct imaging of Jupiter-like exoplanets with ground-based telescopes.

A HIGH-CONTRAST IMAGING ALGORITHM: OPTIMIZED IMAGE ROTATION AND SUBTRACTION

Image Rotation and Subtraction (IRS) is a high-contrast imaging technique which can be used to suppress the speckles noise and facilitate the direct detection of exoplanets. IRS is different from Angular Differential Imaging (ADI), in which it will subtract a copy of the image with 180 degrees rotated around its PSF center, rather than the subtraction of the median of all of the PSF images. Since the planet itself will be rotated to the other side of the PSF, IRS does not suffer from planet self-subtraction. In this paper, we have introduced an optimization algorithm to IRS (OIRS), which can provide an extra contrast gain at small angular separations. The performance of OIRS has been demonstrated with ADI data. We then made a comparison of the signal to noise ratio (S/N) achieved by algorithms of locally optimized combination of images (LOCI) and OIRS. Finally we found that OIRS algorithm can deliver a better S/N for small angular separations.

THE LAMOST SURVEY OF BACKGROUND QUASARS IN THE VICINITY OF THE ANDROMEDA AND TRIANGULUM GALAXIES. II. RESULTS FROM THE COMMISSIONING OBSERVATIONS AND THE PILOT SURVEYS

We present new quasars discovered in the vicinity of the Andromeda and Triangulum galaxies with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope, also named the Guoshoujing Telescope, during the 2010 and 2011 observational seasons. Quasar candidates are selected based on the available Sloan Digital Sky Survey, Kitt Peak National Observatory 4 m telescope, Xuyi Schmidt Telescope Photometric Survey optical, and Wide-field Infrared Survey Explorer near-infrared photometric data. We present 509 new quasars discovered in a stripe of ~135 deg^2 from M31 to M33 along the Giant Stellar Stream in the 2011 pilot survey data sets, and also 17 new quasars discovered in an area of ~100 deg^2 that covers the central region and the southeastern halo of M31 in the 2010 commissioning data sets. These 526 new quasars have i magnitudes ranging from 15.5 to 20.0, redshifts from 0.1 to 3.2. They represent a significant increase of the number of identified quasars in the vicinity of M31 and M33. There are now 26, 62, and 139 known quasars in this region of the sky with i magnitudes brighter than 17.0, 17.5, and 18.0, respectively, of which 5, 20, and 75 are newly discovered. These bright quasars provide an invaluable collection with which to probe the kinematics and chemistry of the interstellar/intergalactic medium in the Local Group of galaxies. A total of 93 quasars are now known with locations within 2fdg5 of M31, of which 73 are newly discovered. Tens of quasars are now known to be located behind the Giant Stellar Stream, and hundreds are behind the extended halo and its associated substructures of M31. The much enlarged sample of known quasars in the vicinity of M31 and M33 can potentially be utilized to construct a perfect astrometric reference frame to measure the minute proper motions (PMs) of M31 and M33, along with the PMs of substructures associated with the Local Group of galaxies. Those PMs are some of the most fundamental properties of the Local Group.

Mauna Kea Spectroscopic Explorer (MSE): a preliminary design of multi-object high resolution spectrograph

The Maunakea Spectroscopic Explorer (MSE) project will transform the CFHT 3.6m optical telescope to a 10m class dedicated multi-object spectroscopic facility, with an ability to measure thousands of objects with three spectral resolution modes respectively low resolution of R≈3,000, moderate resolution of R≈6,000 and high resolution of R≈ 40,000. Two identical multi-object high resolution spectrographs are expected to simultaneously produce 1084 spectra with high resolution of 40,000 at Blue (401-416nm) and Green (472-489nm) channels, and 20,000 at Red (626-674nm) channel. At the Conceptual Design Phase (CoDP), different optical schemes were proposed to meet the challenging requirements, especially a unique design with a novel transmission image slicer array, and another conventional design with oversize Volume Phase Holographic (VPH) gratings. It became clear during the CoDP that both designs presented problems of complexity or feasibility of manufacture, especially high line density disperser (general name for all kinds of grating, grism, prism). At the present, a new design scheme is proposed for investigating the optimal way to reduce technical risk and get more reliable estimation of cost and timescale. It contains new dispersers, F/2 fast collimator and so on. Therein, the disperser takes advantage of a special grism and a prism to reduce line density on grating surface, keep wide opening angle of optical path, and get the similar spectrum layout in all three spectral channels. For the fast collimator, it carefully compares on-axis and off-axis designs in throughput, interface to fiber assembly and technical risks. The current progress is more competitive and credible than the previous design, but it also indicates more challenging work will be done to improve its accessibility in engineering.

Focal plane wave-front sensing algorithm for high-contrast imaging

High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging.

Mechanical design of the stressed-lap polishing tool

We present an overview of the engineering design of stressed lap developed at Nanjing Institute of Astronomical Optics and Technology. Stressed lap consists of two parts: active deformable lap, driving-adjusting mechanism. The finite element model for active deformable lap is constructed, and the performance of lap deforming is discussed. Descriptions about mechanical structure of driving-adjusting mechanism are given. Now, stressed-lap polishing tool has been used to accomplish a fast parabolic mirror in Nanjing. The φ910mm F/2 parabolic mirror has been figured to an accuracy of 22 nm.

A high-contrast imaging polarimeter with a stepped-transmission filter based coronagraph

The light reflected from planets is polarized mainly due to Rayleigh scattering, but starlight is normally unpolarized. Thus it provides an approach to enhance the imaging contrast by inducing the imaging polarimetry technique. In this paper, we propose a high-contrast imaging polarimeter that is optimized for the direct imaging of exoplanets, combined with our recently developed stepped-transmission filter based coronagraph. Here we present the design and calibration method of the polarimetry system and the associated test of its high-contrast performance. In this polarimetry system, two liquid crystal variable retarders（LCVRs） act as a polarization modulator, which can extract the polarized signal. We show that our polarimeter can achieve a measurement accuracy of about 0.2% at a visible wavelength（632.8 nm）with linearly polarized light. Finally, the whole system demonstrates that a contrast of 10-9 at 5λ/D is achievable, which can be used for direct imaging of Jupiter-like planets with a space telescope.

Laboratory experiment of a coronagraph based on step-transmission filters

This paper presents the first results of a step-transmission-filter based coronagraph in the visible wavelengths. The primary goal of this work is to demonstrate the feasibility of the coronagraph that employs step-transmission filters, with a required contrast in the order of better than 10-5 at an angular distance larger than 4λ/D. Two 13-step-transmission filters were manufactured with 5% transmission accuracy. The precision of the transmitted wave distortion and the coating surface quality were not strictly controlled at this time. Although in perfect case the coronagraph can achieve theoretical contrast of 10-10, it only delivers 10-5 contrast because of the transmission error, poor surface quality and wave-front aberration stated above, which is in our estimation. Based on current techniques, step-transmission filters with better coating surface quality and high-precision transmission can be made. As a follow-up effort, high-quality step-transmission filters are being manufactured, which should deliver better performance. The step-transmission-filter based coronagraph has the potential applications for future high-contrast direct imaging of earth-like planets.