Yoshiyuki Saruwatari

Image printing on the surface of anti-biofouling zwitterionic polymer brushes by ion beam irradiation.

A CMB monomer was polymerized on a glass plate with a surface-confined ATRP initiator containing a 2-bromoisobutyryl group. The glass plate modified with a PCMB brush was highly hydrophilic and showed a strong resistance against non-specific adsorption of proteins and cell adhesion. Upon ion beam irradiation, furthermore, the PCMB brush was ablated and a hollow space with a designed shape could be made to which HEK293 cells (from human embryonic kidney) and Hep G2 (from human hepatoma) cells non-specifically adhered, while no adhesion of these cells to the non-treated area on the brush was observed. The present results clearly indicate the usefulness of ion beam-printed patterns of anti-biofouling zwitterionic polymer brushes in the biomedical field.

Structure of water in the vicinity of a zwitterionic polymer brush as examined by sum frequency generation method

A zwitterionic poly(carboxymethylbetaine) (PCMB) brush was prepared on a fused quartz prism by the surface-initiated atom transfer radical polymerization (SI-ATRP) of CMB monomer. The conformation of PCMB brush and the state of water at the surface of the brush were examined using sum frequency generation (SFG) technique. The C-H stretching band of the brush, indicating the gauche defect of the brush, was affected by the contact medium such as dry nitrogen, water vapor-saturated nitrogen and liquid water. The water molecules at the PCMB-water interfaces were not largely oriented in comparison with the interfacial water of both bare and the ATRP-initiator-modified quartz prisms. The similar tendency was previously observed for water in the vicinity of water-soluble zwitterionic polymers and polymer thin films using Raman and attenuated total reflection (ATR) infrared spectroscopies, respectively. The electrical neutralization between neighboring positive and negative charges might diminish the electrostatic adsorption of water molecules to the vicinity of zwitterionic polymer brushes.

Structure of water at zwitterionic copolymer film-liquid water interfaces as examined by the sum frequency generation method.

A copolymer film composed of zwitterionic carboxymethylbetaine (CMB) and n-butyl methacrylate (BMA), Poly(CMB-r-BMA), was cast on a flat plane of an octadecyltrichlorosilane (ODS)-modified fused quartz prism with a semi-cylindrical shape. CH stretching of the polymer film and O-H stretching of water at the surface of the film were examined using the sum frequency generation (SFG) technique. The C-H stretching band of the cast film, indicating a gauche defect of the film, was affected by the contact medium including dry nitrogen, water vapor-saturated nitrogen and liquid water. In contrast, the C-H stretching of an octadecyl group introduced onto the quartz prism for stable attachment of the cast film was not significantly changed by the contact medium. The O-H stretching band indicated that water molecules at the surface of the Poly(CMB-r-BMA) film in contact with liquid water were not greatly oriented in comparison with those at the surfaces of a bare prism, an ODS SAM-modified prism, and a prism covered with a PolyBMA film or a copolymer film of BMA and methacrylic acid or 2-(dimethylamino)ethyl methacrylate. A similar small perturbation of the structure of water was previously observed in the vicinity of water-soluble zwitterionic polymers and zwitterionic copolymer films using Raman and attenuated total reflection infrared spectroscopies, respectively. A distinct effect of charge neutralization to diminish the perturbation of the structure of interfacial water around polymer materials was suggested.

Nanostructure and Salt Effect of Zwitterionic Carboxybetaine Brush at the Air/Water Interface

Zwitterionic amphiphilic diblock copolymer, poly(ethylhexyl acrylate)-b-poly(carboxybetaine) (PEHA-b-PGLBT), was synthesized by the reversible addition-fragmentation chain transfer (RAFT) method with precise control of block length and polydispersity. The polymers thus obtained were spread onto the water surface to form a polymer monolayer. The fundamental property and nanostructure of the block copolymer monolayer were systematically studied by the surface pressure-molecular area (π-A) isotherm, Brewster angle microscopy (BAM), and X-ray reflectivity (XR) techniques. The π values of the monolayer increased by compression in relatively larger A regions. After showing a large plateau region by compression, the π value sharply increased at very small A regions, suggesting the formation of poly(GLBT) brush formation just beneath the water surface. The domain structure of μm size was observed by BAM in the plateau region. XR profiles for the monolayer at higher surface pressure regions clearly showed the PGLBT brush formation in addition to PGLBT carpet layer formation under the hydrophobic PEHA layer on the water surface, as was observed for both anionic and cationic brush layer in the water surface monolayer studied previously. The critical brush density, where the PGLBT brush is formed, was estimated to be about 0.30 chains/nm(2) for the (EHA)45-b-(GLBT)60 monolayer, which is relatively large compared to other ionic brushes. This observation is consistent with the fact that the origin of brush formation is mainly steric hindrance between brush chains. The brush thickness increased by compression and also by salt addition, unlike the normal ionic brush (anionic and cationic), whose thickness tended to decrease, i.e., shrink, by salt addition. This might be a character unique to the zwitterionic brush, and its origin is thought to be transition to an ionic nature from the almost nonionic inner salt caused by salt addition since both the cation and anion of the GLBT chain obtained counterions by the addition of salt. This stretching nature of the PGLBT brush depends on the ion species of the salt added, and it followed the Hofmeister series, i.e., more stretching in the order of Li(+) > Na(+) > K(+). However, it was rather insensitive to the anion species (Cl(-), Br(-), SCN(-)), which suggests that the carboxylic anion has a more dominant effect than the quaternized cation in GLBT although the former is a weak acid and the latter is believed to be a strong base.

Self-association of zwitterionic polymer-lipid conjugates in water as examined by scattering measurements.

As a model of lipopeptide, a zwitterionic polymer-lipid conjugate was prepared from carboxymethylbetaine monomer (CMB) using a lipophilic initiator having a cholesteryl or dihexadecylglyceryl end group for atom transfer radical polymerization (ATRP). The polymer-lipid conjugates (Lipid-PCMB) obtained could be dispersed in water, and self-association of the compounds could be characterized by both light scattering (dynamic light scattering, DLS; electrophoretic light scattering, ELS) and small-angle X-ray scattering (SAXS). DLS and ELS measurements showed no secondary aggregation of the self-associated Lipid-PCMB molecules in salt solutions, though their surfaces were almost charge-balanced. The hydrophilic PCMB layer of Lipid-PCMB aggregates gave rise to dispersions under ionic conditions. Furthermore, structural analyses by DLS, ELS and SAXS measurements suggested that Lipid-PCMB aggregates consisted of a hydrophobic lipid core and a hydrophilic PCMB layer, that is, a core-shell structure. To the best our knowledge, this is the first study in which SAXS analyses were performed for zwitterionic polymer-lipid conjugates.

Titanium alloy modified with anti-biofouling zwitterionic polymer to facilitate formation of bio-mineral layer

The surface of a titanium (Ti) alloy was modified with a self-assembled monolayer of poly(ethylene glycol) methacrylate phosphate (Phosmer PE). A zwitterionic monomer (carboxymethyl betaine, CMB) could be copolymerized with the surface-bound Phosmer PE due to a flexible linker between the Ti alloy surface and a methacryloyl group of Phosmer PE. The poly(CMB) (PCMB)-modified Ti alloy plate exhibited strong suppression of protein adsorption and cell adhesion, and induced approximately twice the amount of calcium (Ca2+) deposition as compared to the unmodified Ti alloy plate. The zwitterionic polymer-modified surfaces not only showed enhanced mineralization clusters creation and growth, but they were also highly non-responsive to biologically derived materials such as proteins and cells. Therefore, it is possible to easily form highly pure and rigid hydroxyapatite layers on Ti alloy surfaces without the incorporation of organic molecules such as proteins. The present surface modification technique and strategy can be applied to implantable orthopedic materials as a means of encouraging integration with host tissues, such as the thigh bone.

A novel approach for UV-patterning with binary polymer brushes

A mixed self-assembled monolayer (SAM) of an initiator (3-(2-bromo-2-isobutyryloxy)propyl triethoxysilane) for atom transfer radical polymerization (ATRP) and an agent (6-(triethoxysilyl)hexyl 2-(((methylthio)carbonothioyl)thio)-2-phenylacetate) for reversible addition-fragmentation chain transfer (RAFT) polymerization was constructed on the surface of a silicon wafer or glass plate by a silane coupling reaction. When a UV light at 254nm was irradiated at the mixed SAM through a photomask, the surface density of the bromine atom at the end of BPE in the irradiated region was drastically reduced by UV-driven scission of the BrC bond, as observed by X-ray photoelectron spectroscopy. Consequently, the surface-initiated (SI)-ATRP of 2-ethylhexyl methacrylate (EHMA) was used to easily construct the poly(EHMA) (PEHMA) brush domain. Subsequently, SI-RAFT polymerization of a zwitterionic vinyl monomer, carboxymethyl betaine (CMB), was performed. Using the sequential polymerization, the PCMB and PEHMA brush domains on the solid substrate could be very easily patterned. Patterning proteins and cells with the binary polymer brush is expected because the PCMB brush indicated strong suppression of protein adsorption and cell adhesion, and the PEHMA brush had non-polar properties. This technique is very simple and useful for regulating the shape and size of bio-fouling and anti-biofouling domains on solid surfaces.