You-Zung Hsieh

Determination of preservatives in food products by cyclodextrin-modified capillary electrophoresis with multiwavelength detection

Abstract A high-performance capillary electrophoretic method with multiwavelength detection was developed to analyze frequently used preservatives. The effects of α-cyclodextrin and β-cyclodextrin on migration behaviours of nine preservatives were investigated. The preservatives were successfully separated within 9 min using a borax-NaOH buffer (pH 10.0) modified with 2 mM α-cyclodextrin. In optimized separation conditions, the reproducibilities of the migration times of the preservatives were satisfactory (R.S.D. values

High-performance capillary electrophoretic analysis of synthetic food colorants

SummaryA high-performance capillary electrophoresis method with diode-array detection has been developed for analysis of synthetic food colorants. The influence of buffer composition on the separation of the food colorants was examined, as were the effects of α-, β- and γ-c-yclodextrins on analyte migration behavior. Eight food colorants were completely separated within 10 min using pH 9.5 borax—NaOH buffer containing 5 mM β-cyclodextrin. Experimental results indicate that the relative standard deviations of analyte migration times were<0.88% under the optimized separation condition. Correlation coefficients of the linear calibration plots of the analytes exceeded 0.998. The method was suitable for determination of the quantities of synthetic food colorantsi in ice cream bars and fruit soda drinks.

Using the cationic surfactants N-cetyl-N-methylpyrrolidinium bromide and 1-cetyl-3-methylimidazolium bromide for sweeping-micellar electrokinetic chromatography

This paper describes a sweeping-micellar electrokinetic chromatography (sweeping-MEKC) technique for the determination of seven benzodiazepines, using, as sweeping carriers, the ionic liquid-type cationic surfactants 1-cetyl-3-methylimidazolium bromide (C(16)MIMBr) and N-cetyl-N-methylpyrrolidinium bromide (C(16)MPYB). These surfactants resemble the commonly employed cationic surfactant cetyltrimethylammonium bromide (CTAB), but they provide different separation efficiencies. We optimized the separation and sweeping conditions, including the pH, the concentrations of organic modifier and surfactant, and the sample injection volume. Adding C(16)MIMBr or C(16)MPYB to the background electrolyte enhanced the separation efficiency and detection sensitivity during the sweeping-MEKC analyses of the benzodiazepines. C(16)MIMBr enhanced the sensitivity for each benzodiazepine 31-59-fold; C(16)MPYB, 86-165-fold. In the presence of C(16)MPYB, the limits of detection for the seven analytes ranged from 4.68 to 9.75 ng/mL. We adopted the sweeping-MEKC conditions optimized for C(16)MPYB to satisfactorily analyze a human urine sample spiked with the seven benzodiazepines. To minimize the matrix effects, we subjected this urine sample to off-line solid phase extraction (SPE) prior to analysis. The recoveries of the analytes after SPE were satisfactory (ca. 77.0-88.3%). Our experimental results reveal that the cationic surfactant C(16)MPYB exhibits superior sweeping power relative to those of C(16)MIMBr and CTAB and that it can be applied in sweeping-MEKC analyses for the on-line concentrating and analyzing of benzodiazepines present in real samples at nanogram-per-milliliter concentrations.

Sensitive label-free electrochemical analysis of human IgE using an aptasensor with cDNA amplification

In this study, we developed an ultrasensitive label-free aptamer-based electrochemical biosensor, featuring a highly specific anti-human immunoglobulin E (IgE) aptamer as a capture probe, for human IgE detection. Construction of the aptasensor began with the electrodeposition of gold nanoparticles (AuNPs) onto a graphite-based screen-printed electrode (SPE). After immobilizing the thiol-capped anti-human IgE aptamer onto the AuNPs through self-assembly, we treated the electrode with mercaptohexanol (MCH) to ensure that the remaining unoccupied surfaces of the AuNPs would not undergo nonspecific binding. We employed a designed complementary DNA featuring a guanine-rich section in its sequence (cDNA G1) as a detection probe to bind with the unbound anti-human IgE aptamer. We measured the redox current of methylene blue (MB) to determine the concentration of human IgE in the sample. When the aptamer captured human IgE, the binding of cDNA G1 to the aptamer was inhibited. Using cDNA G1 in the assay greatly amplified the redox signal of MB bound to the detection probe. Accordingly, this approach allowed the linear range (coefficient of determination: 0.996) for the analysis of human IgE to extend from 1 to 100,000pM; the limit of detection was 0.16pM. The fabricated aptasensor exhibited good selectivity toward human IgE even when human IgG, thrombin, and human serum albumin were present at 100-fold concentrations. This method should be readily applicable to the detection of other analytes, merely by replacing the anti-human IgE aptamer/cDNA G1 pair with a suitable anti-target molecule aptamer and cDNA.

Non-metallic nanomaterials in cancer theranostics: a review of silica- and carbon-based drug delivery systems

Abstract The rapid development in nanomaterials has brought great opportunities to cancer theranostics, which aims to combine diagnostics and therapy for cancer treatment and thereby improve the healthcare of patients. In this review we focus on the recent progress of several cancer theranostic strategies using mesoporous silica nanoparticles and carbon-based nanomaterials. Silicon and carbon are both group IV elements; they have been the most abundant and significant non-metallic substances in human life. Their intrinsic physical/chemical properties are of critical importance in the fabrication of multifunctional drug delivery systems. Responsive nanocarriers constructed using these nanomaterials have been promising in cancer-specific theranostics during the past decade. In all cases, either a controlled texture or the chemical functionalization is coupled with adaptive properties, such as pH-, light-, redox- and magnetic field- triggered responses. Several studies in cells and mice models have implied their underlying therapeutic efficacy; however, detailed and long-term in vivo clinical evaluations are certainly required to make these bench-made materials compatible in real bedside circumstances.

Using cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography to determine selective serotonin reuptake inhibitors

We have employed a rapid and highly efficient on-line preconcentration method, cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-sweeping-MEKC), for the analysis of selective serotonin reuptake inhibitors (SSRIs) of antidepressant drugs. We monitored the effects of several of the CSEI-sweeping-MEKC parameters - including the pH, the concentrations of high-conductivity buffer (HCB), sodium dodecyl sulfate (SDS), and organic modifier, the injection length of the HCB, and the injection time of the sample - to optimize the separation process. The optimal background electrolyte was 50 mM citric acid/disodium hydrogenphosphate buffer (pH 2.2) containing 100 mM SDS and 22% isopropyl alcohol. The sensitivity enhancements of the SSRIs sertraline, fluoxetine, paroxetine, fluvoxamine, and citalopram ranged from 5.7 x 10(4) to 1.2 x 10(5); the coefficients of determination exceeded 0.9938 and the relative standard deviations of the peak heights were less than 3.2%; the detection limits ranged from 0.056 to 0.22 ng/mL. We employed the optimal conditions to analyze these five SSRIs in a plasma sample prepared using solid-phase extraction (SPE) to minimize the influence of the matrix. Although the limits of detection of the SSRIs in human plasma were higher than those in pure water, this present technique is more sensitive than other, more-conventional methods. The recovery of the SPE extraction efficiency was satisfactory (up to 89%). Our findings suggest that, under the optimal conditions, the CSEI-sweeping-MEKC method can be used successfully to determine these five SSRIs in human plasma.

Optimization of the headspace solid-phase microextraction for determination of glycol ethers by orthogonal array designs.

A headspace solid-phase microextraction (HS-SPME), in conjunction with gas chromatography-flame ionization detection for use in the determination of six frequently used glycol ethers at the microg/l level is described. A 75 microm Carboxenpolydimethylsiloxane fiber was used to extract the analytes from an aqueous solution. Experimental HS-SPME parameters such as extraction temperature, extraction time, salt concentration and sample volume, were investigated and optimized by orthogonal array experimental designs. The relative standard deviations for the reproducibility of the optimized HS-SPME method varied from 1.48 to 7.59%. The correlation coefficients of the calibration curves exceeded 0.998 in the microg/l range of concentration with at least two orders of magnitude. The method detection limits for glycol ethers in deionized water were in the range of 0.26 to 3.42 microg/l. The optimized method was also applied to the analysis of glycol ethers in urine and blood samples with the method detection limits ranged from 1.74 to 23.2 microg/l.

1-Butyl-3-methylimidazolium-based ionic liquids and an anionic surfactant: Excellent background electrolyte modifiers for the analysis of benzodiazepines through capillary electrophoresis

In this study, we found that adding 1-butyl-3-methylimidazolium-based ionic liquids (ILs) and sodium dodecyl sulfate (SDS) as modifiers in the background electrolyte (BGE) for capillary electrophoresis enhanced the separation of benzodiazepines. In particular, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][NTf2]) was the best IL additive for the separation system because its anionic moiety interacted favorably with the benzodiazepines. We added SDS because of its known effect on the separation of hydrophobic analytes. We optimized the separation conditions in terms of the concentrations of the IL, SDS, and organic solvent, the pH, and the BGEs ionic strength. The optimal BGE, containing 170 mM [BMIM][NTf2] and 10 mM SDS, provided baseline separation, high efficiency, and satisfactory peak shapes for the benzodiazepines. The separation mechanism was based on heteroassociation between the anionic moiety of the IL and the benzodiazepines, with SDS improving the resolution of the separation. The limits of detection for the seven analytes ranged from 2.74 to 4.42 microg/mL. We subjected a urine sample to off-line solid phase extraction (SPE) prior to the analysis of its benzodiazepine content. Our experimental results reveal that the combination of [BMIM][NTf2] and SDS provides adequate separation efficiency for its application to CE analyses of benzodiazepines after SPE concentration.

A pentacyclic nitrogen-bridged thienyl-phenylene-thienyl arene for donor-acceptor copolymers: synthesis, characterization, and applications in field-effect transistors and polymer solar cells.

A pentacyclic benzodipyrrolothiophene (BDPT) unit, in which two outer thiophene rings are covalently fastened with the central phenylene ring by nitrogen bridges, was synthesized. The two pyrrole units embedded in BDPT were constructed by using one-pot palladium-catalyzed amination. The coplanar stannylated Sn-BDPT building block was copolymerized with electron-deficient thieno[3,4-c]pyrrole-4,6-dione (TPD), benzothiadiazole (BT), and dithienyl-diketopyrrolopyrrole (DPP) acceptors by Stille polymerization. The bridging nitrogen atoms make the BDPT motif highly electron-abundant and structurally coplanar, which allows for tailoring the optical and electronic properties of the resultant polymers. Strong photoinduced charge-transfer with significant band-broadening in the solid state and relatively higher oxidation potential are characteristic of the BDPT-based polymers. Poly(benzodipyrrolothiophene-alt-benzothiadiazole) (PBDPTBT) achieved the highest field-effect hole mobility of up to 0.02 cm(2) V(-1) s(-1). The photovoltaic device using the PBDPTBT/PC(71)BM blend (1:3, w/w) exhibited a V(oc) of 0.6 V, a J(sc) of 10.34 mA cm(-2), and a FF of 50%, leading to a decent PCE of 3.08%. Encouragingly, the device incorporating poly(benzodipyrrolothiophene-alt-thienopyrrolodione) (PBDPTTPD)/PC(71)BM (1:3, w/w) composite delivered a highest PCE of 3.72%. The enhanced performance arises from the lower-lying HOMO value of PBDPTTPD to yield a higher V(oc) of 0.72 V.

Determination of cocaine and its metabolites using cation-selective exhaustive injection and sweeping-MEKC

We have employed a high‐sensitivity on‐line preconcentration method, cation‐selective exhaustive injection (CSEI) and sweeping MEKC, for the analysis of cocaine, benzoylecgonine, norcocaine, and cocaethylene. We monitored the effects of several of the CSEI‐sweeping‐MEKC parameters – including the pH, the concentrations of SDS and organic modifier, the injection length of the high‐conductivity buffer, and the injection time of the sample – to optimize the separation process. The optimal BGE was 100 mM phosphoric acid (pH 1.8) containing 75 mM SDS with 10% 2‐propanol and 10% tetrahydrofuran as the organic modifier. In addition, electrokinetic injection of the sample at 15 kV for 900 s provided both high separation efficiency and enhanced sweeping sensitivity. The sensitivity enhancements for cocaine, norcocaine, and cocaethylene ranged from 2.06×104 to 3.96×104; for benzoylecgonine it was 1.75×103; the coefficients of determination exceeded 0.9958. The LODs, based on an S/N ratio of 3:1, of sweeping‐MEKC ranged from 33.5 to 52.8 ng/mL; in contrast, when using CSEI‐sweeping‐MEKC the sensitivity increased to range from 29.7 to 236 pg/mL. Under the optimal conditions, we analyzed cocaine in a human urine sample prepared using off‐line SPE to minimize the influence of the matrix. The recovery of the SPE efficiency was satisfactory (ca. 74.9–87.6%). Our experimental results suggest that, under the optimal conditions, the CSEI‐sweeping‐MEKC method can be used to determine cocaine and its metabolites with high sensitivity in human urine.